PFERD Carbide Rotary Bar General -purpose KUD series
DKSH Holding Ltd.
About This Product
■ Sponsored by carbide rotary bar compliant with DIN 8032
・ The cut eye is compliant with DIN 8033.
・ Faired carbide rotary bars can also be used for any intensity covice material.
・ This versatility is realized by high quality standards.
■ Advantages
・ Excellent tool performance by high -quality carbide material, various cut shapes, and head shape
・ Improvement of further cutting performance by cutting for specific coating materials
・ Long tool life
・ Suppress shocks and core blur and help a smooth finish
■ Examples of use
・ Bali removal
・ Molded
・ Edge surface/rounded
・ Cutting of welding meat pandeme
・ Casted metal burr off and polished
・ Fix of the shaving material shape
■ About use
・ To maximize the ability of tools to maximize a grinder with an appropriate output
・ Use by observing maximum circumference speed and maximum rotation speed
・ When working without moving a carbide rotary bar, or when cutting with all 360 ° blades, it can be 3,000 rpm or less.
・ If you do not cut in large quantities, you can use it with a maximum speed (excluding long shank and carbide rotary bar).
・ Low heat conductivity such as titanium alloy and stainless steel is used within the range of recommended revolutions to avoid damage to tools.
・ If the heat is applied too much to the tool, the synchronization part of the shank and the head turns blue. Discolored carbide rotary bars cannot be used
・ Fix the tool firmly with a grinder. Be careful of dropping out due to impact or blur when used
・ Fix the shank deeply. In general, at least two -thirds of the shank length length are inserted into the grinder and used.
・ For shank diameter of 6 mm or more, use a 300-500W output grinder when using it at the high -speed rotation speed and the peripheral speed.
・ When using rough products such as cut alu, use 500W grinder is recommended
・ The area of a carbide rotary bar that comes into contact with the coaching material is up to 30 % of the total
・ When cutting in a situation where the grounding surface exceeds 30 %, it is recommended to use cut toUGH and cut TouGhNULLs.
・ Generally, carbide rotary bars move in the opposite direction to the rotation direction of the product.
・ Smooth finish is possible by cutting in the same direction as the rotation direction.
* There are other model numbers.
-
-
Product
PFERD Carbide Rotary Bar General -purpose KUD series