Liquicap FMI51 for continuous measurement of liquids-LIQUICAP FMI51

Liquicap FMI51 for continuous measurement of liquids
Endress+Hauser Group Services AG

About This Product

For continuous level measurement and interference measurement of liquid

■ Applications
LIQUICAP FMI51 is a highly reliable completely insutile rod probe that is optimal for continuous level monitoring of liquids. In particular, it is ideal for measurements and high -temperature applications for forming adhesive. Measurements do not depend on the string rate rate. Combined with FieldGate FXA320 (measured value transmission using Internet technology), Liquicap will provide an ideal solution to supply materials and optimize logistics (inventory management).

If the liquid conductive rate is 100 μS/cm or more, the device does not depend on the proportional power rate, so it is possible to measure various liquids without any proofreading.
・ Process connection: Flange and screws
・ Process pressure: vacuum ~+10 mpa (vacuum ~+1,450 PSI)
・ Measurement range: 0.1 to 4.0m (0.3 to 13ft)
・ Process temperature: -80 ~+200 ° C (-112 ~+392 ° f)
・ International explosion -proof, overflow prevention (WHG), SIL, Sanitari certification, ship class certification

■ Advantages
・ It can also be used in safety systems that require SIL2 functional safety standards that conform to IEC 61508.
・ It is highly reliable and can be used for diverse applications by extensive authentication and certification.
・ No calibration is required (prior calibration at the factory). If the conductive rate is measured with a conductive rate of 100 μs/cm or more, no proofreading is required.
-The processing is made of corrosion -resistant material and FDA -specified material.
・ You can set on -site settings by menu guide with easy -to -understand Japanese text display (optional).
・ 2 -step over voltage protection

Model
There are 1 models for this product.

Product
Liquicap FMI51 for continuous measurement of liquids

Handling Company
Endress+Hauser Group Services AG

*Please note that we may not be able to accommodate sample requests.

1 Models of Liquicap FMI51 for continuous measurement of liquids

Product Image	Part Number	Price (excluding tax)	Ambient temperature	Application limit	Characteristics / application	Class certification	Conductive liquid linearity error	Design certification	Features	Interface measurement	Major liquid portion	Maximum measurement distance	Measurement principle	Power / communication	Process connection	Process pressure / maximum overpressure limit	Process temperature	Safety certification	Sanitari process connection	Sanitation standard conformity certificate	Selection item	Sensor length	Standard conformity certificate/authentication	accuracy	communication
	LIQUICAP FMI51	Available upon quote	-50 ° C ...+70 ° C -58 ° f ...+158 ° f	Can be used in small spaces to the ceiling Floating conductivity, non -conductive solution, liquid conductivity <100 μs/cm Pressure and temperature decreased warning	Completely insulated rod probe, standard process conditions and harsh process conditions (temperature, pressure, adhesive)	GL/ABS/DNV	<0.25%	EN 10204-3.1 NACE MR0175	Bad sense Factory adjusted Short measurement value response time	A layer containing liquid / liquid and emulsion	Insulation material: PTFE, PFA Equivalent to SUS316L	0.1 m ... 4.0 m	Static capacity type	DC 12-36 v Hart PFM	G1/2, G 3/4, G 1, G1 1/2/NPT 1/2, NPT 3/4, NPT 1 ", NPT1 1/2 Flange DN25 .../ASME 1 ".../jis ...	Vacuum ... 10 MPA (Vacuum ... 1,450 PSI)	-80 ° C ...+200 ° C (-112 ° f ...+392 ° f)	SIL	Triclamp ISO02852 Milk coupling Flash mount seal	3A, EHEDG	Separate housing Gas tight probe seal	Total length: 6m (20ft) Unscassful Obi length: up to 2m	ATEX, FM, CSA, IEC EX, TIIS, InMetro, Nepsi, EAC	0.1% repetability	4 ... 20 ma mount PFM