Demolition Small Hydraulic Excavator Demolition 2 Piece Boom Specification PC78US-11
Maeda Manufacturing Co., Ltd.
About This Product
■Significantly increases the mass that can be attached to the tip attachment.
Approximately 19% increase compared to Komatsu's previous model
■Equipped with work area detection and alarm
-Equipped with a function that detects the turning angle and work equipment posture and issues an alarm if the set working range is exceeded.
・We have maximized the mass that can be attached to the tip attachment.
■Wide work range and ease of working at your feet
・Achieves both the height unique to a 2-piece boom and the ease of working at your feet.
・Maximum working height: Reinforced arm for demolition: 7,610mm, Reinforced long arm for demolition: 8,150mm (centered on arm tip pin)
■Vehicle protection
・Reinforced undercovers are installed on the bottom of the upper revolving structure and the bottom of the truck frame to prevent damage to equipment inside the vehicle body even if objects such as demolition debris or rebar are thrown up.
- Comes standard with a deck guard that protects the exterior when the vehicle turns. Slim shape with consideration to vehicle width and appearance.
・In order to accommodate high-load demolition work, the Revo frame, the most important frame of the vehicle body, has been reinforced to the maximum extent possible.
■Safety device
・Displays the surroundings of the machine on a monitor using three cameras. The operating status of the human detection collision warning system is also displayed.
・When a person is detected in the detection area or alarm area, a marker (yellow) is displayed on the monitor and a buzzer sounds to alert the operator.
・The opening/closing front guard has been strengthened in anticipation of a collision with a gala. Operator protection guard (front guard) Level 2 (ISO 10262), compliant with flying object protection equipment under the Industrial Safety and Health Act.
・The retractable head guard complies with the operator protection guard (top guard) level 1 (ISO 10262) and head guard standards of the Industrial Safety and Health Act.
■Improved basic performance/Easy to use driver's seat
・There are two types of arm lengths. All of them are reinforced on 4 sides for demolition work, and come with two systems of piping and drain piping that are also compatible with hydraulic swivel attachments.
-Equipped with an integrated counterweight that is over 300kg heavier than the standard model for heavy work.
- Equipped with a low power consumption and long life LED light as standard, allowing work with good visibility even in the early morning or after sunset.
-Equipped as standard with a proportional switch (proportional control switch) that allows you to adjust the speed of rotation and opening/closing of the attachment depending on the amount of finger operation. Improved fine control and easy positioning.
・The skylight is equipped with a wiper with a window washer. Effective for removing dust, etc. generated during work, as well as during rainy days.
-
Product
Demolition Small Hydraulic Excavator Demolition 2 Piece Boom Specification PC78US-11
-
Handling Company
Maeda Manufacturing Co., Ltd.
-
Categories
1 Models of Demolition Small Hydraulic Excavator Demolition 2 Piece Boom Specification PC78US-11
| Product Image | Part Number | Price (excluding tax) | Reinforced arm for demolition | Reinforced long arm for demolition |
|---|---|---|---|---|
|
|
PC78US-11 (disassembly 2-piece boom specification) |
Available upon quote | 900kg | 750kg |
Customers who viewed this product also viewed
Other products of Maeda Manufacturing Co., Ltd.
View more products of Maeda Manufacturing Co., Ltd.
