Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-P300-61AF
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Platts Co., Ltd.

Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor
Platts Co., Ltd.


About This Product

■ High back support function The back bottom is divided into "high back: head -back" and "low back: waist", and each angle can be adjusted by electric. ■ Knee -position fitting function that suppresses the gap when raising the back The fitting function of the knee position is adjusted to the length of the user's thighs, and the flexing position of the knee leg bottom can be adjusted in two steps without changing the parts, so it supports a comfortable backing with less gaps. ■ Natural and comfortable reclining operation With 1 button operation, the low back, highback, and knees move while adjusting the angle of the back and knees, and realizes a comfortable reclining posture. ■ Reduction of aspiration risk When the back is raised, the angle of the neck is adjusted, the abdominal pressure is reduced, and the posture that is easy to swallow can be reproduced. ■ Pressure ulcer (bed speech) Reduction of risk (displacement, reducing pressure) The back -rise using the high back support function can reduce the gap and the pressure on the body compared to the conventional background. ■ In a posture that is easy to breathe Reduces back pressure and abdominal pressure, expands the diaphragm, and creates a comfortable posture that is easy to breathe. ■ We support a wide range of positioning from the back to those who are pregnant. Even if you are on the back, if you can match the high back support angle to the curvature of the spine, you can properly position it when you raise your back. ■ Vertical lifting mechanism that can be installed in space saving The bed rises vertically without swinging when lifting and down, so the installation area is small. ■ Easy switching between feet raising and lowering toes You can switch the angle of the toe with one touch. It can also be used to reduce the edema of the legs. ■ Corresponds to the use of various options The gap between the floor and the base frame is 7.0cm. ■ Infusion bar mounting hole There is a hole for attaching drip rods on a total of four left and right sides of the head side and the side. ■ Hook for Harunbag, Nurse Call Holder/Universal Hook ■ angle meter An angle meter that can be attached to the bottom. You can perform a back -raising operation while checking the appropriate angle. ■ Equipped with LINAK motor Equipped with a Danish Linak motor with excellent silent and waterproof (IPX6) (IPX4 only for high back motors). ■ Rechargeable battery Battery units are available optionally so that they can be used in the event of a power outage or in places without a power supply (battery requires charging). ■ Others ・ The center of the side rail is possible ・ Easy -to -use hand switch ・ Casters with excellent driving and operability ・ Side rail storage holder

  • Product

    Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor




*Please note that we may not be able to accommodate sample requests.

7 Models of Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor

Items marked with have different values ​​depending on the model number.

Click on the part number for more information about each product

Product Image Part Number Price (excluding tax) Back -raising angle Color Floor surface High back angle JAN code Knee -raising angle Mattress compatible dimensions Maximum user weight Motor club Rated power consumption Rated voltage country of origin full length mass packing type
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Part Number-P300-61AF

P300-61AF

$ 3,532.80〜 0 to 60 degrees natural brown 27.5 ~ 67.5cm 0 to 20 degrees 4,539,940,011,198.00 0 to 25 degrees (linked back) Total length 190.0cm ~ 192.0cm, width 83.0cm 138kg / Safety operating load: 174kg (1,700N) Made by LINAK 90W AC100V Vietnam 212.0cm 101.5kg 4 Packing Wooden board
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Part Number-P300-61CF

P300-61CF

$ 3,532.80〜 0 to 60 degrees Dark brown 27.5 ~ 67.5cm 0 to 20 degrees 4,539,940,011,211.00 0 to 25 degrees (linked back) Total length 190.0cm ~ 192.0cm, width 83.0cm 138kg / Safety operating load: 174kg (1,700N) Made by LINAK 90W AC100V Vietnam 212.0cm 101.5kg 4 Packing Wooden board
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Part Number-P300-61BFFFFF

P300-61BFFFFF

$ 3,532.80〜 0 to 60 degrees natural brown 27.5 ~ 67.5cm 0 to 20 degrees 4,539,940,011,204.00 0 to 25 degrees (linked back) Total length 190.0cm ~ 192.0cm, width 83.0cm 138kg / Safety operating load: 174kg (1,700N) Made by LINAK 90W AC100V Vietnam 212.0cm 100.0kg 4 Packing Steelboard
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Part Number-P300-61DF

P300-61DF

$ 3,532.80〜 0 to 60 degrees Dark brown 27.5 ~ 67.5cm 0 to 20 degrees 4,539,940,011,228.00 0 to 25 degrees (linked back) Total length 190.0cm ~ 192.0cm, width 83.0cm 138kg / Safety operating load: 174kg (1,700N) Made by LINAK 90W AC100V Vietnam 212.0cm 100.0kg 4 Packing Steelboard
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Part Number-P300-61EF

P300-61EF

$ 3,609.60〜 0 to 60 degrees natural brown 27.5 ~ 67.5cm 0 to 20 degrees 4,539,940,011,990.00 0 to 25 degrees (linked back) Total length 190.0cm ~ 192.0cm, width 83.0cm 138kg / Safety operating load: 174kg (1,700N) Made by LINAK 90W AC100V Vietnam 212.0cm 96.5kg 4 Packing Resin board
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Part Number-P300-61FF

P300-61FF

$ 3,609.60〜 0 to 60 degrees Dark brown 27.5 ~ 67.5cm 0 to 20 degrees 4,539,940,012,003.00 0 to 25 degrees (linked back) Total length 190.0cm ~ 192.0cm, width 83.0cm 138kg / Safety operating load: 174kg (1,700N) Made by LINAK 90W AC100V Vietnam 212.0cm 96.5kg 4 Packing Resin board
Electric beds for medical facilities P300 Series Positioning Bed Series 4 -wheel lock specification 2 Motor-Part Number-P300-61GE

P300-61GE

$ 3,904.00〜 0 to 60 degrees - 27.5 ~ 67.5cm 0 to 20 degrees 4,539,940,012,010.00 0 to 25 degrees (linked back) Total length 190.0cm ~ 192.0cm, width 83.0cm 138kg / Safety operating load: 174kg (1,700N) Made by LINAK 90W AC100V Vietnam 212.0cm 99.5kg 4 Packing Orthopedic board

Click on the part number for more information about each product

Other products of Platts Co., Ltd.


View more products of Platts Co., Ltd.

About Company Handling This Product

Platts Co., Ltd.

  • Japan
  • Since 1992
  • 104 employees

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree