Near infrared bottom throwing light reflection type near infrared component meter KB-270-KB-270

Near infrared bottom throwing light reflection type near infrared component meter KB-270
Kett Electric Laboratory Co. Ltd.

About This Product

In general, component analysis takes time. No matter how good the analysis method is, the data that can be obtained a day is limited. However, there is a way to save time. Use a near -infrared component meter.
By registering a calibration line correlated with the component analysis value in the near -infrared component meter, the component content is found in a few seconds.

The instrument "near-infrared component meter KB-270" uses the near-infrared reflective absorbance of the near-infrared reflection of the polygamy length of different characteristics, so that up to four components can be measured in a few seconds at the same time in one measurement. In addition, because it is difficult to receive the shape of the sample and the grain diameter variation, it is often unnecessary to treat the pre -treatment such as crushing or crushing, and it is possible to measure a valuable small amount sample using an optional masking holder.

The significant reduction in one measurement can be immediately reflected on the manufacturing line of the object, which will reduce the production loss. In addition, as the number of data points increases, it is easier to read the components fluctuation tendency for each day or seasonal, so it can be expected to improve manufacturing quality.

■ Immediate response
Put the sample on the measurement window, close the shading lid, and press the measurement button. The ingredients are displayed in about 9 seconds.

■ Equipped with two types of measurement modes
･ There are "Normal Measurement Mode", which displays the average value of the set measurement, and "continuous measurement mode" that allows you to check the time of the component over time.
･ Graph display is also possible on the PC.

■ Cert weathering function
Using the included PC software, you can easily create a calibration line by PLS calculation.

■ Selectable measurement method
･ Not only use the attached glass chare as a sample cell, but also can be placed depending on the sample.
-The sheet -shaped sample can be selected from the reflector *, the valuable and small samples use masking holder *, or from abundant measurement methods prepared.
※option

■ For various measurement targets
It does not matter whether it is agricultural products, food raw materials, processed products, pharmaceuticals, paper, and minerals, as well as types and traits such as powder, paste.
* Both require the creation of a calibration line.

■ Measurement time
･ Normal measurement: 7 seconds (depending on the setting)
･ Continuous measurement: 0.5 second cycle

Model
There are 1 models for this product.

Product
Near infrared bottom throwing light reflection type near infrared component meter KB-270

Handling Company
Kett Electric Laboratory Co. Ltd.

*Please note that we may not be able to accommodate sample requests.

1 Models of Near infrared bottom throwing light reflection type near infrared component meter KB-270

Product Image	Part Number	Price (excluding tax)	Input and output	Measurement method	Measurement spot	Number of channels	Spectroscopy	Used temperature and humidity range	accessories	display	light source	option	power supply	size	weight
	KB-270	$ 12,736.00〜	USB (PC input / output), RS-232C (printer output), LAN	Near infrared bottom throwing light reflection type	Diameter about 25mm	50 (1ch x 4 ingredients simultaneous measurement)	Filter specification method	5-35 ° C (without condensation), 30-80%RH	Shaving lid, sample cell (glass charter φ90mm), sample cell holder, calibration board, power supply cable, spare fuse, wireless LAN router, PC software, instruction manual	Organic EL display	Tungsten lamp	Printer "VZ-800", large glass chare, masking holder, reflector, deep shading lid	AC100-240V (50/60Hz) 40W	415 (W) x370 (D) x230 (H) mm	12kg