Vibration is also non -contact, and measurement cylinder displacement, distance, position sensor EDDYNCDT 3005
Micro-Epsilon JAPAN K.K.
About This Product
Micro Epcilon's whirlpool -current sensor is designed so that not only measurement of displacement, distance, shift, position, but also vibration can be measured in non -contact. Auspiece -current sensor is very suitable for situations where high accuracy is required in severe industrial environments due to pressure, dirt, and temperature, and the microsillone's fluffy current sensor boasts extreme precision, so it is also used for measurement that requires accuracy of nanometor -level.
EDDYNCDT 3005 is a compact and high -performance stream -current measurement system that can quickly, accurate and accurate displacement and position measurement. It is composed of sturdy controllers, sensors, and built -in cables, and is adjusted according to ferromagnetic or non -magnetic substances at factory shipment.
■ Characteristics
･ Ideal for integrating machines and plants
･ Sturdy and compact foam factor compliant with IP67
･ High pressure confidentiality
･ Easy operation
･ Active temperature compensation up to +180 ° C
･ Measurement range 1/2 / 3 /6 mm
･ Up to 0.5 µm to decompose
･ High response frequency
-
Product
Vibration is also non -contact, and measurement cylinder displacement, distance, position sensor EDDYNCDT 3005
-
Handling Company
Micro-Epsilon JAPAN K.K.
-
Categories
8 Models of Vibration is also non -contact, and measurement cylinder displacement, distance, position sensor EDDYNCDT 3005
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Analog output | Bearing pressure | Frequency characteristics (-3db) | Linearness | Measurement range | Measurement start distance | Minimum target size (flat plate) | Power-supply voltage | Protection grade (DIN EN 60529) | Repetition | Sensor type | Shock (Din En 60068-27-27) | Synchronization | Target material | Temperature range operation | Temperature stability | Vibration (din en 60068-2-6) | When storing the temperature range | connection | mass | resolution |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DT3005-U1-A-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 2.5 µm | 1 mm | 0.1 mm | Ø 24 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 0.5 µm | Non -shock | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | aluminum | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | 0.25 µm / k less than | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
70 g | 0.5 µm |
|
|
DT3005-U1-M-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 2.5 µm | 1 mm | 0.1 mm | Ø 24 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 0.5 µm | Non -shock | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | steel | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | 0.25 µm / k less than | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
70 g | 0.5 µm |
|
|
DT3005-S2-A-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 5 µm | 2 mm | 0.2 mm | Ø 24 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 1 µm | Shielding | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | aluminum | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | 0.5 µm / k less than | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
75 g | 1 µm |
|
|
DT3005-S2-M-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 5 µm | 2 mm | 0.2 mm | Ø 24 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 1 µm | Shielding | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | steel | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | 0.5 µm / k less than | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
75 g | 1 µm |
|
|
DT3005-U3-A-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 7.5 µm | 3 mm | 0.3 mm | Ø 48 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 1.5 µm | Non -shock | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | aluminum | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | 0.75 µm / k less than | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
77 g | 1.5 µm |
|
|
DT3005-U3-M-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 7.5 µm | 3 mm | 0.3 mm | Ø 48 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 1.5 µm | Non -shock | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | steel | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | 0.75 µm / k less than | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
77 g | 1.5 µm |
|
|
DT3005-U6-A-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 15 µm | 6 mm | 0.6 mm | Ø 72 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 3 µm | Non -shock | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | aluminum | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | Less than 1.5 µm / k | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
95 g | 3 µm |
|
|
DT3005-U6-M-C1 |
Available upon quote | 0.5 to 9.5 v | 10 BAR (sensor, cable, controller) | 5 KHz | <± 15 µm | 6 mm | 0.6 mm | Ø 72 mm | 12-32 DC V | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | Less than 3 µm | Non -shock | 15 g / 6ms on 3 axis (per 2 directions and 1,000 shocks) | Through LF and HF variations | steel | Sensor: -20 ~+125 ° C (optional -20 ~+180 ° C), controller: 0 to+70 ° C | Less than 1.5 µm / k | 5 g / 10 to 500 Hz on 3 axis (per 2 directions and 10 cycles) | -20 ~+80 ° C |
Sensor: Built -in cable (length 1 m, minimum bending radius 18mm) Power supply/signal: 5 -pin plug conona M12 |
95 g | 3 µm |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Micro-Epsilon JAPAN K.K.
View more products of Micro-Epsilon JAPAN K.K.
