High -speed rubber Bali removal device
Iwaki Kogyo
About This Product
It is a high -speed rubber burr off device developed by our company.
Using "Air", "Water", and "Rotation of the Motor" to remove the burrs at high speed, the Bali can be removed in about 60 seconds per cycle.
◼︎ Characteristics
･ Activation principle
The product is wound up by the air from the lower three directions, and the product is separated by colliding with the two protrusions attached to the upper rotation board. Since the material hardness, shape, etc. differ depending on the product, the number of rotations on the disk can be adjusted by the inverter. It is also possible to adjust the timing and time of the winding air, so you can remove Bali depending on the adjustment.
◼︎ product
･ Easy to remove: Products with cuts, simple -shaped products such as O -rings
･ Difficult to remove: Siminish products, heavy products, and thin burrs remaining in products
* There are things that are easy to remove depending on the material and shape, those that are difficult to remove, and those that are easily scratched, but depending on the setting conditions, there are some effects, so you can not understand the actual effect unless you test it.
◼︎ Introduction of equipment
･ 200V Three -phase power supply (20A)
･ Air
･ Water (store water in the tank in the device/automatically supply a water hose to a tank)
･ Compressor 3.7kW or more (5.5kW recommended)
･ Air tank capacity 200L (recommended)
* Piping of water is not required.
* Compressor and air tank capacity are recommended.
◼︎Milted work (usage)
Rubber
-
Product
High -speed rubber Bali removal device
-
Handling Company
Iwaki Kogyo
1 Models of High -speed rubber Bali removal device
| Product Image | Part Number | Price (excluding tax) | Air pressure | Automatic setting condition memory | Capacitance | Daylight | Device dimensions | Device weight | Gas cylinder | Ingredient kiln | Inverter motor capacity | Material kiln fully open | Primary power supply capacity | Product capacity | Production counter | Safety device | Three -phase power supply | Touch panel | Touch panel setting item | Water tank capacity | others |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
High -speed rubber Bali removal device |
Available upon quote | MAX1MPA | 1 to 50 pieces | 3kw | 465mm |
1,980 x 1,005 x 1,100mm (height x width x back) * The height of the rising security door 2,377mm |
430kg | φ250 × 750L | φ395mm | 3HP (2.2kw) | 47 ° | 20A | 30L | Existence | Emergency stop buttons, two -handed motion buttons, safety bars (prevention of sandwiched) | AC200V 50Hz/60Hz | Mitsubishi | Automatic operation time, motor rotation number, air valve ON/OFF time, water injection with/None, water injection time, water injection interval, production counter usage/usage | 8L | 2 color signal tower and buzzer |
Customers who viewed this product also viewed
Other products of Iwaki Kogyo
View more products of Iwaki Kogyo
