32ton tightening press molding machine (powder ceramic, Teflon molding)
Iwaki Kogyo
About This Product
It is a hydraulic press molding machine produced to perform powder molding.
◼︎ Characteristics
1. A 32 -ton cylinder is installed on the top and bottom, and it is possible to tighten both at 5 to 32ton.
2. Since the intermediate board moves up and down, it is easy to take out the product.
3. Select the device that suits the customer request from the proportional valve, servo, and inverter and control it.
◼︎Milted work (usage)
Powder ceramic, Teflon (PTFE) molding
-
Product
32ton tightening press molding machine (powder ceramic, Teflon molding)
-
Handling Company
Iwaki Kogyo
1 Models of 32ton tightening press molding machine (powder ceramic, Teflon molding)
| Product Image | Part Number | Price (excluding tax) | Board size | Daylight | Effective gold dimensions | Hydraulic motor capacity | Lamb diameter | Machine installation dimensions (horizontal x vertical x depth) | Maximum mold thickness | Maximum use pressure | Mold decomposition machine | Press operating speed | operation | output | stroke |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Management number 025 |
Available upon quote | 400mm x 400mm | Above 900mm below 450mm | 300mm x 300mm | 7.5kw | φ140mm x 2 | Approximately 1,700mm x 3,300mm x 1,240mm | Designation | 21MPa | Yes (within 3 presses) |
Up 0.5-70mm/s Descent 0.5-40mm/s |
Manual automatic | IPM-2C-32 (32ton x 2) | Stroke (mm) 380mm below 300mm |
Other products of Iwaki Kogyo
View more products of Iwaki Kogyo
