ESPERT 500 Series Attachment
NAKANISHI INC.
About This Product
Although it is a high torque of up to 8.7cn · m, it achieved an ultra -lightweight and compact of 160g (in the case of a torque motor).
Characteristics of the series
･ Adopt brushless motor
There is no need to replace the carbon brush.
By using a brushless motor, there is no dust due to the brush, and the vibration has been reduced quieter and less.
･ Two types of motors to choose
It can be selected according to the application from rotation speed, torque, etc.
･ Maximum rotation speed 50,000min-1
Up to 50,000min-1 high-speed rotation enables precision fine processing.
･ Fine adjustment is possible without interruption
Foot controller * By connecting, the rotation speed is variable while working.
* Foot controllers are optional products.
-
Product
ESPERT 500 Series Attachment
-
Handling Company
NAKANISHI INC.
9 Models of ESPERT 500 Series Attachment
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Attachable tool shaft diameter | Belt driving speed | Maximum rotation speed used | Reduction ratio | Round -trip number (variable) | Standard attached collet | Standard equipment accessories | Stroke width adjustment | Used belt width | mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
EHG-400 |
$ 231.00〜 | - | - | 40,000min-1 or less. | - | - | φ6.0mm (CHG-6.0) | ・ Spana (10x10): 1 piece ・ Stick wrench (K-212): 1 | - | - | 110g |
|
|
EHR-500 |
$ 250.80〜 | - | - | 50,000min-1 or less. | - | - | φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | ・ Spana (7x5.1): 1 sheet ・ Pinspana (K-233): 1 sheet ・ L-shaped spanner (9): 1 sheet | - | - | 94g |
|
|
EHL-401 |
$ 250.80〜 | - | - | 50,000min-1 or less. | - | - | φ3.0mm (CHH-3.0) φ2.35mm (CHH-2.35) | ・ Spana (7x5.1): 1 sheet ・ Pinspana (K-233): 1 sheet | - | - | 70g |
|
|
EIC-300 |
$ 250.80〜 | - | - | 30,000min-1 or less. | 3/4 deceleration | - | φ3.0mm (CHC-3.0) | ・ Spana (20x24): 1 piece ・ Exclusive Collet wrench (K-231): 1 piece ・ Standard attached tool (below) 64101 Disc exclusive rubber pad φ102 Disc exclusive rubber pad φ20mm 1 bottle 64103 Disc exclusive rubber pad φ303 φ303 Don Paper Disc φ11 # 1805 64207 Sand Paper Disc φ11 # 6005 pieces 64213 Sand Paper Disc φ21 # 1805 pieces 64217 Sand Paper Disc φ21 # 6005 pieces 64223 Sand Paper Disc φ31 # 1805 Donpaper disc φ31 # 6005 sheets | - | - | 54g |
|
|
EKC-300 |
$ 250.80〜 | - | - | 30,000min-1 or less. | 3/4 deceleration | - | φ3.0mm (CHC-3.0) | ・ Spana (20x24): 1 piece ・ Exclusive Collet wrench (K-231): 1 piece ・ Standard attached tool (below) 64101 Disc exclusive rubber pad φ102 Disc exclusive rubber pad φ20mm 1 bottle 64103 Disc exclusive rubber pad φ303 φ303 Don Paper Disc φ11 # 1805 64207 Sand Paper Disc φ11 # 6005 pieces 64213 Sand Paper Disc φ21 # 1805 pieces 64217 Sand Paper Disc φ21 # 6005 pieces 64223 Sand Paper Disc φ31 # 1805 Donpaper disc φ31 # 6005 sheets | - | - | 54g |
|
|
EBS-101 |
$ 343.20〜 | - | 0 to 705m/minute | 30,000min-1 or less. | - | - | - | Allen wrench (3mm): 1 piece / Standard attached tool (below) 64902 Sand belt 4mm width # 1202 Sand belt 4mm width # 2402 Sand belt 4mm width # 402 Sand belt 6mm width # 1202 # 2402 6402 Sand belt 6mm width # 4002 64922 Sand belt 8mm width # 1202 Sand belt 8mm width # 2402 Sand belt 8mm width # 4002 | - | 4, 6, 8mm (1st 200mm) | 355g |
|
|
ERA-270 |
$ 349.80〜 | - | - | 27,000min-1 or less. | 1/1.5 | - | φ3.0mm (CHS-3.0) | ・ Spana (8x5), (7x5.1), (20x24): One tool is not included. | - | - | 107g |
|
EML-8 |
$ 402.60〜 | Up to φ3.5mm, screw tightening type | - | 25,000min-1 or less. | - | 0-10,000 times/minutes | - | Allen wrench (1.5mm): 1 piece / Standard attached tool (below) 62751 Damper Holder 1 62510 Sera Fiber 1 bottle 62814 Electric Diamond Doyassis 1.25 × 4 × 50 # 1001 60520 Sera Fiber Whetstone Chips 1 × 6 × 50 # 12001 | - | - | 130g |
|
ELS-100 |
$ 561.00〜 | Up to φ6.4mm, screw tightening type | - | 25,000min-1 or less | - | 0-6,300 times/minutes | - | ・ Allen Lench (2mm), (3mm): 1 lubricant, lubricating oil, raster nozzle, standard attached tool set (below) 62502 Stick holder 1 62505 stick holder 1 62751 Dumpling holder 1 62525 square pad 1 square pad 1 rod for square pads 62527 Angle rod 62527 Angle rod 62552 Sand Paper Chips # 12010 62555 Sand Paper Chips | 0-6mm | - | 680g |
Click on the part number for more information about each product
Other products of NAKANISHI INC.
View more products of NAKANISHI INC.
About Company Handling This Product
- Japan