20880 | Unparalleled accuracy, speed / convenient solid surface analysis Zeta Power of Survival Analysis Surpass 3
Anton Paar GmbH
Price (excluding tax)
Model Description
■ Model: Surpass 3 Standard ・ High -end zeta potential analysis device for solid surface analysis ・ Complete automatic zeta potential analysis of solid sample surface ・ Automatic detection of equivalent electric points ・ Time decomposition measurement of adsorption behavior to solids in liquid
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Main power supply
Measurement range cell resistance
Measurement range conductivity
Measurement range flow current
Measurement range flowing potential
Measurement range pH value
Measurement range pressure measurement
Measurement range temperature
Sample size requirement Ceramic Membrane
Sample size requirement Flexible tube
Sample size requirement Prefile syringe
Sample size requirement cylindrical core
Sample size requirement fabric
Sample size requirement fiber
Sample size requirement particles
Sample size requirement vial
Sample size requirements Non -porous film, foil, flat plate
Sample size requirements hollow zone film
Sample size requirements porous film, foil, flat plate
Software requirements
size
weight
-
Part Number
20880
-
Handling Company
Anton Paar GmbH
Unparalleled accuracy, speed / convenient solid surface analysis Zeta Power of Survival Analysis Surpass 3 20880's performance table
Items marked with have different values depending on the model number.
| Product Image | Price (excluding tax) | Main power supply | Measurement range cell resistance | Measurement range conductivity | Measurement range flow current | Measurement range flowing potential | Measurement range pH value | Measurement range pressure measurement | Measurement range temperature | Sample size requirement Ceramic Membrane | Sample size requirement Flexible tube | Sample size requirement Prefile syringe | Sample size requirement cylindrical core | Sample size requirement fabric | Sample size requirement fiber | Sample size requirement particles | Sample size requirement vial | Sample size requirements Non -porous film, foil, flat plate | Sample size requirements hollow zone film | Sample size requirements porous film, foil, flat plate | Software requirements | size | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | AC 115 ~ 230 V, 50 ~ 60 Hz, 200 VA | 5 Ω ~ 20 mΩ ± (2 % + 0.5 ω) | 0.1 MS/M ~ 1,000 MS/M | ± 2 ma ± (0.2 % + 1 PA) | ± 2,000 MV ± (0.2 % + 4 μV) | PH 2 ~ PH 12 | 3,500 MBAR ± (0.2 % + 0.5 mbar) If the pressure difference exceeds 1,200 MBAR, external pressure supply (compressed nitrogen) is required, | 20 ° C to 40 ° C temperature control options available | Flat sheet: 14 mm in diameter Single channel: outer diameter 10 mm or 13 mm Multi -channel: outer diameter 25 mm or 30 mm | Length: minimum 100 mm Outer diameter: 0.7 mm ~ 6 mm | "1.0 ml length" Siring Barrell (ISO 11,040-4) | Height: Up to 4 inches Diameter: 1 inch | Minimum 30 mm x 30 mm | Minimum 100 mg | Particle diameter: minimum 25 μm | 2R/4R vial (ISO standard), outer diameter 16 mm | Rectangle: 20 mm x 10 mm (maximum thickness: 2 mm) or minimum 35 mm x 15 mm (maximum thickness: 40 mm), etc. | Length: minimum 170 mm | Rectangle: 20 mm x 10 mm (maximum thickness: 2 mm) disc: 14 mm or 15 mm in diameter (maximum thickness: 2 mm) | Microsoft Windows®7 32/64 Bit SP1 or later is required. Windows 7 Starter is not supported. Microsoft Windows® 8 32/64 bit, others | 600 mm x 432 mm x 245 mm (depth x width x height) Installation area: 612 mm x 536 mm (depth x width) Clearance: 360 mm | 26 |
There are 2 models for this product.
Other products of Anton Paar GmbH
View more products of Anton Paar GmbH
About Company Handling This Product
- Austria