Low -temperature hot melt 707K | Low -temperature hot melt
Sanyo Life Material
Price (excluding tax)
Model Description
Characteristics and uses High viscosity and more general -purpose use. [Compatible application] Styrofoam, paper, cushioning material, fiber material, Plastic and wood
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Open time/set time
Packing
Software (R & B)
TN-CK40-H1147
TN-CK40-H1147/C53
Viscosity (CPS)
TN-EM18WD-H1147-EX
TN-EM18WD-H1147-EX/C53
-
Part Number
Low -temperature hot melt 707K
-
Product
Low -temperature hot melt
-
Handling Company
Sanyo Life Material
Low -temperature hot melt Low -temperature hot melt 707K's performance table
Items marked with have different values depending on the model number.
| Product Image | Price (excluding tax) | Open time/set time | Packing | Software (R & B) | TN-EM18WD-H1147-EX | TN-EM18WD-H1147-EX/C53 | Viscosity (CPS) |
|---|---|---|---|---|---|---|---|
| Available upon quote | 20 seconds/3-5 seconds | 5kg (about 200 bottles) Danbo | 88 ± 5 ℃ | HF reading/writing head For explosion -proof areas or extreme requirements (food industry, etc.) Cylinder type, M18x1 Stainless steel, 1.4404 (SUS316L) LCD polymer front cap High protection grade: IP69K Special double lip sealing Enhanced resistance to acidic and alkaline cleaning agents For the food industry Laser engraved with very little laser Power supply and operation can only be made when connecting to Blident interface Connect only by M12 × 1 connector, Blident extension cable ATEX, Category II3G, EX Zone 2 ATEX, Category II3D, EX Zone 22 | HF reading/writing head For explosion-proof areas or extremely requirements (food industry, etc.) and for bath line porridge using TBEN-* Cylinder type, M18x1 Stainless steel, 1.4404 (SUS316L) LCD polymer front cap High protection grade: IP69K Special double lip sealing Enhanced resistance to acidic and alkaline cleaning agents For the food industry Laser engraved with very little laser No terminal resistance (separate end resistance is required) This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*. Up to 32 node/line or connection Supported terminal resistance is required (see accessories) In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power. Please make sure that the voltage drop on the line is within the regulations Sparrine: Up to 2m Maximum bus length: 50m By default, the commands can only be processed by one read/write head, so HF bus mode is suitable for sta | 10,700 (130 ° C) |
There are 2 models for this product.
Customers who viewed this product also viewed
Other products of Sanyo Life Material
View more products of Sanyo Life Material
