Price (excluding tax)
■ Features ・ Three types of IR-CUT coat type, IR absorption glass type, IR absorption glass and IR-CUT coat are used according to the purpose. ・ Combination with UV absorption glass and combination with Uvir-Cut. ・ In addition, as a special coating, low -entry angle -dependent AR coating that improves the incident angle dependence of the coating, low -stress AR coating that can cause low warping even with a thin plate substrate of less than 0.2 mm, and other conductive electrical membranes, other conductive films. It is also possible to coat the water membrane function.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Court -adhesion strength
High -temperature exam
High temperature and high humidity test
Low -temperature exam
Solo -resistant test
Temperature cycle test
Thermal shock test
Wear resistance
Part Number
IR-CUT filterProduct
Optical product optical filterHandling Company
NIHON DEMPA KOGYO CO., LTD.Items marked with have different values depending on the model number.
Product Image | Price (excluding tax) | Court -adhesion strength | High -temperature exam | High temperature and high humidity test | Low -temperature exam | Solo -resistant test | Temperature cycle test | Thermal shock test | Wear resistance |
---|---|---|---|---|---|---|---|---|---|
Available upon quote | Paste the cellophane tape (LP-18) on the product, rub it with your fingers about 3 times, then peel it quickly and vertically. | 85 ℃ 1,000h | 60 ° C 90%RH ~ 95%RH 1,000h | -40 ℃ 1,000h | 2.94N (300GF) using Sylbon paper (dusper K-3) with a solvent such as IPA, acetone, ethanol, etc. 1 round trip/second consecutive, round trip distance 10mm 100 round trip | -40 ° C 2h, 85 ° C 2h, 100 ° C/h 10 cycle | -40 ° C/85 ° C each 30 minutes each | Press the vapor-deposited surface with a sillbon paper (dusper K-3), press pressure 4.9N/cm2 (500GF/cm2) 1 round trip/second consecutive, round trip distance 10mm 100 round trip |