Sansho Industry Co., Ltd.'s Company Profile and Products

■Features Program settings via touch panel (digital settings/display). The load/time curve can be set freely and stable continu...

Three major benefits of Newton press ■Achieves both upper and lower axis molding Molded products with uniform density can be ea...

Features/benefits ■Both upper and lower axes molding The mold becomes a floating state simply by increasing the pressure from t...

■Features ・Smooth pressure increase by using a high-performance high-pressure hydraulic pump ・Analog pressure gauge (SI unit ...

• Machining / Machine Tools

• Desktop Press Machines

■Features ・Although it is ultra-compact, it is possible to tighten 5,000N (500kgf) and to control the load in 100gf units.The ...

• Machining / Machine Tools

• Desktop Press Machines

■Applications ・Fuel cell MEA production, glass and film substrate pasting ・Green sheet lamination ・Thermosetting molding of ...

■Features ・Achieved upper/lower heating plate parallelism of 20 μm (when heating plate is 100 square mm) (adopts precision pol...

■Summary Compact and easy to use, ideal for hydrostatic isostatic presses and high density homogeneous molding. ■Electric pump...

■Features ・Even for laminated products with cavities, uniform ・Lamination possible ・Hot water management with band heater PI...

■Summary In conventional hydraulic press molding, as the size of the product increases, the press power is increased in proport...

■Summary This device is equipped with a heating mechanism in an atmosphere chamber equipped with a press mechanism, and is desi...

• Machining / Machine Tools

• Hot Presses

■Features ・For mass production molding: 1 to 10 ton specifications. ・Production capacity: 10 to 120 pieces/min. ・Powder meta...

■Features ・Standardized unit surface pressure 200MPa (2000kgf/c㎡) ・Precision wrapping (mirror finish) ・Series available for...

■Features - Adopts a turn lock mechanism: The opening/closing method has been devised to make it more compact and operate smart...

■Summary In contrast to the wet CIP method, which is good at high-mix, low-volume production of complex high-density powder mol...

■WIP Hot water laminators can manufacture laminated ceramic electronic components, etc. It is ideal for laminated parts with un...

■High vacuum hot press EHP is a box type hot press that can perform pressure sintering and diffusion bonding. ■Pressure sinter...

• Machining / Machine Tools

• Hot Presses

■Summary The raw material is crushed by the impact and shear action of the high-speed rotating crushing blade and the fixed bla...

• Machining / Machine Tools

• Pulverizers

■Summary The material put into the container is instantly pulverized by the ultra-high-speed rotating grinding blade. The crush...

• Machining / Machine Tools

• Crushers

■Summary While maintaining the instantaneous and powerful crushing, it is even safer with a safety device. In addition, the str...

• Machining / Machine Tools

• Crushers

■Summary Ultra-high-speed rotation of 20,000 to 30,000 rpm provides instant and powerful crushing. It has a structure that mini...

• Machining / Machine Tools

• Crushers

■Summary The continuous crusher hammer crusher efficiently crushes materials using the impact force of the swinging hammer blad...

• Machining / Machine Tools

• Hammer Crushers

■Summary The "Wing Mill" has a stainless steel contact part and is suitable for grinding food. Raw materials are fed into a gri...

• Machining / Machine Tools

• Crushers

■Additional functions have been added to the ultra-fine grinder Tornado Mill, making it easier to use. ・TM-25W with water cool...

• Machining / Machine Tools

• Crushers

■Summary Wing mills use specially shaped grinding blades to suppress the generation of heat during grinding. This makes it suit...

• Machining / Machine Tools

• Crushers

■Summary The continuous crusher hammer crusher efficiently crushes materials using the impact force of the swinging hammer blad...

• Machining / Machine Tools

• Hammer Crushers

■Summary With the hammer crusher at the core, we have integrated a series of processes from the input hopper to the collection ...

• Machining / Machine Tools

• Crushers

■Summary With the hammer crusher at the core, we have integrated a series of processes from the input hopper to the collection ...

• Machining / Machine Tools

• Crushers

■Summary With the hammer crusher at the core, we have integrated a series of processes from the input hopper to the collection ...

• Machining / Machine Tools

• Crushers

■Summary A sharp knife rotates vertically at high speed, and the input raw material is crushed, pulverized, and granulated by i...

• Machining / Machine Tools

• Crushers

■Summary The lump raw material is coarsely ground by two rollers and then directly fed into the fine grinder at the bottom. Fin...

• Machining / Machine Tools

• Pulverizers

■Summary It has a structure that generates a strong impact force due to the powerful G generated by high-speed revolution/rotat...

• Machining / Machine Tools

• Wet Grinding Mills

■Summary Grinding pots are available for various materials and volumes. We also carry grinding pots that can be attached to pla...

• Machining / Machine Tools

• Crushers

■Summary This is a coarse pulverizer that crushes raw material lumps by crushing raw materials between two roll blades. It is c...

• Machining / Machine Tools

• Roll Crushers

■Features ・Ideal for grinding raw materials where contamination is averse. - Smooth grinding and prevention of raw material ad...

• Machining / Machine Tools

• Roll Crushers

■Summary Excellent sharpness. This is a coarse crusher that continuously performs shear crushing using sharp rotating blades an...

• Machining / Machine Tools

• Crushers

■Summary This machine consists of a shelf-type vacuum drying chamber, a cold trap, and a control panel, and has a vacuum pump a...

• Machining / Machine Tools

• Freeze Dryers

■Summary We tend to think that there is no point in using a blower under normal vacuum conditions, but since there is no absolu...

• Machining / Machine Tools

• Freeze Dryers

■Summary This machine is a device that vacuum-dries workpieces placed in a rotating mesh basket at approximately 30℃. A cold tr...

• Dryers

• Vacuum Dryers

■Summary This is a completely new dryer that uses near-infrared rays, which are the same as sunlight, in addition to convention...

• Agricultural Materials

• Food Dryers

■Summary You can slice many types of vegetables with this one device. In addition to vegetables, it can be used for fruits and ...

■Summary We often experience tapping the bottom of a container to pack the contents tightly to increase packing density. The vi...

■Features ・Since the pressure-receiving surface is parallel, it is possible to directly set the workpiece. ・Analog hydraulic ...

• Converters & Transducers

• Load Cells

■Summary A maximum of 1200℃ is achieved with household electrical wiring (100V-12A). This is an electric furnace that achieves ...

• Machining / Machine Tools

• Electric Furnaces

■Summary The work process, from dispersion and kneading to vacuum and extrusion molding, can be performed as a whole, and it al...

• Machining / Machine Tools

• Extruder

■Summary The raw material mixing case is drum-shaped and has a rotating shaft in the center.While special rotating blades are c...

• Machining / Machine Tools

• Material Mixers

■Summary Rolling dryers are ideal for straightening tube pipes. ■Features For pipes: Roll dry and straighten.

■Summary The take-up conveyor is ideal for uniform and continuous drying of green bodies while controlling speed with sensors a...

■Summary Great for all kinds of applications, such as improving handling of fine powder, chamfering rough-shaped products, and ...

• Machining / Machine Tools

• Ball Mills

■Summary Great for all kinds of applications, such as improving handling of fine powder, chamfering rough-shaped products, and ...

■Summary Great for all kinds of applications, such as improving handling of fine powder, chamfering rough-shaped products, and ...

■Rotating stand The raw material is crushed by the impact and shear action of the high-speed rotating crushing blade and the fi...

• Stages

• Rotary Tables

■Summary Sansho's vibrating sieve series was developed from the user's perspective, with an emphasis on ease of maintenance and...

• FA Equipment

• Vibrating Sieve Machines

■Summary Even though the sieve diameter is φ600mm, screen replacement is very easy. The conventional screen fixing method was m...

• FA Equipment

• Vibrating Sieve Machines

■Features ・Easy and powerful with new air transport system E-Jetter ・You can build a pneumatic transportation system. ・Compl...

• Conveyors

• Conveying Systems

■Summary By setting an "electromagnetic feeder" when using a crusher "Hammer Crusher" or "Wing Mill", it is possible to supply ...

• FA Equipment

• Quantitative Feeding Devices

■Summary This machine is a compact fixed quantity feeder for powder and granular material that has a simple structure and is ea...

• FA Equipment

• Feeders

■Summary The structure allows for easy attachment/detachment and replacement of containers using a one-touch clamp. This is a f...

• Agitators

• Agitators

■Summary Great for all kinds of applications, such as improving handling of fine powder, chamfering rough-shaped products, and ...

• Machining / Machine Tools

• Granulators