Sanko Industries Co., Ltd.

■Measures for damper installation If a damper is installed close to the blower, the manufacturing specifications will change. W...

• Controllers

• Barometric Dampers

• Purification Equipment

• Ducts

The standard vacuum damper has an airtight structure. Appropriate control of operating performance is required for barotropic ...

• Controllers

• Barometric Dampers

■Pressure resistant specifications ・Wind speed is 10m/s or less at 500Pa or less. HFD is less than 20m/s. -If installing near ...

• Controllers

• Barometric Dampers

The surface treatment is marine silver painting on the inside and outside. The bearing is made of brass with Teflon coating. T...

• Controllers

• Barometric Dampers

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・FD closes inst...

• Controllers

• Barometric Dampers

• Controllers

• Barometric Dampers

Since FMD prioritizes fire prevention function, the structure and function of [Legal Compliance for Dampers] are the standard, ...

• Controllers

• Barometric Dampers

A circular octopus foot sleeve for the floor. Comes with a safety cover (C type for φ300 or less). ■Production standards ・Φ85...

• Purification Equipment

• Ducts

• Controllers

• Barometric Dampers

• Purification Equipment

• Ducts

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・PFD closes ins...

• Controllers

• Barometric Dampers

Comes with a 280°C temperature fuse and fire protection.

• Controllers

• Barometric Dampers

■Product features ・Compared to conventional products, airtight performance has been significantly improved. (Improves the airt...

• Controllers

• Barometric Dampers

Under normal conditions, it can be used as an RD (low differential pressure damper). It can be held fully closed by operating t...

• Controllers

• Barometric Dampers

The surface treatment is marine silver painting on the inside and outside. The bearing is made of brass with Teflon coating. Th...

• Controllers

• Barometric Dampers

• Purification Equipment

• Ducts

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・PD closes inst...

• Controllers

• Barometric Dampers

■Production standards ・Φ85: L dimension 450mm or less 1 rib ・Φ100～Φ300 (25 pitch) L dimension is 500mm or less ・ (1 rib for...

• Purification Equipment

• Ducts

A slide sleeve for circular beams. ■Production standards ・Φ85: L dimension 800mm or less 1 rib ・For Φ100 to Φ200, L dimensio...

• Purification Equipment

• Ducts

■Production standards ・Φ85: L dimension 450mm or less ・(For L dimensions of 451mm to 800mm or less, two pieces will be welded...

• Purification Equipment

• Ducts

■Product features ・Compared to conventional products, airtight performance has been significantly improved. (Improves the airt...

• Controllers

• Barometric Dampers

■Pressure resistant specifications ・Wind speed is 10m/s or less at 500Pa or less. HFD is less than 20m/s. -If installing near ...

• Controllers

• Barometric Dampers

• Purification Equipment

• Ducts

Painting is marine silver repair only on the inside welds.

• Purification Equipment

• Ducts

A circular floor fall prevention fully threaded sleeve. ■Screw installation standards ・Comes with one fall prevention screw (...

• Purification Equipment

• Ducts

• Controllers

• Barometric Dampers

Seal around the polycarbonate window cover and FG section. L dimension is the same as standard product.

• Safety Devices

• Fire Dampers

A circular floor sleeve. Comes with safety cover (C type for Φ300 or less). ■Production standards ・Φ85: L dimension 450mm or ...

• Purification Equipment

• Ducts

■Pressure resistant specifications The wind speed is less than 500Pa and less than 10m/s. ■Operation function ・SD shuts off i...

• Controllers

• Barometric Dampers