Lightning protection SPD for Cat6A compatible LAN with deterioration diagnosis LAN-CAT6A-P+II (R)
Sankosha Co., Ltd.
About This Product
LAN SPD with deterioration diagnosis compatible with 10GBase-T and PoE++. Connect the LINE side to the outside line and the EQUIP side to the protected equipment side.
■Main uses
・10 Gigabit Ethernet protection
・Multi-Gigabit/Ethernet (2.5GBASE-T, 5GBASE-T) protection
・Network camera protection
・Protection of wireless LAN access points
・Protection of VoIP compatible phones/servers
・Compatible with GIGA school concept
■Features
・Protects 10GBase-T and PoE++ network equipment
・Compatible with GIGA school concept
・Compatible with UTP cable, STP cable (shielded cable)
- Compatible with CAT6A cable, also compatible with lower cables such as CAT6 cable
・Protects against abnormal voltage to the shield part
・Equipped with deterioration diagnosis function (dedicated tester is required as an option)
・Can be installed on 35mm DIN rail
■Environmental conditions
・Place of use: Indoors
・Use (storage) temperature: -40°C to +85°C range
・Use (storage) Humidity: 90% or less (no condensation)
-
Product
Lightning protection SPD for Cat6A compatible LAN with deterioration diagnosis LAN-CAT6A-P+II (R)
-
Handling Company
Sankosha Co., Ltd.
-
Categories
1 Models of Lightning protection SPD for Cat6A compatible LAN with deterioration diagnosis LAN-CAT6A-P+II (R)
| Product Image | Part Number | Price (excluding tax) | AC durability 50Hz, 0.5A, 1s | Bit error rate | Breakdown voltage 100V/s | Compatible line 1 | Compatible line 2 | Compatible line 3 | Connector | Deterioration diagnosis using a dedicated tester | Impulse durability 10/350μs | Impulse durability 8/20μs | Impulse reset DC 60V, 600mA | Insulation resistance DC 60V | Mass | Maximum continuous working voltage Uc | Maximum discharge current 8/20μs | Near-end crosstalk attenuation | Rated current | Transmission band used | Transmission loss (between each line) | Voltage protection level Up 1.2/50μs,10kV |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LAN-CAT6A-P+II (R) |
Available upon quote | 5 times | 0.01% or less | 160V~300V (between each line and ground) |
10BASE-T: IEEE802.3 100BASE-TX: IEEE802.3u 1,000BASE-T: IEEE802.3ab |
2.5GBASE-T: IEEE802.3bz 5GBASE-T: IEEE802.3bz 10GBASE-T: IEEE802.3an |
PoE: IEEE802.3af PoE+: IEEE802.3at PoE++: IEEE802.3bt |
RJ-45: 8 poles 8 cores | LED on: Normal / LED off: Deteriorated (replacement required) | 2.5kA, 2 times (Category D1) | 5kA, 10 times (Category C2) | Within 30ms (between PoE power supply terminals) | 1,000MΩ or more (between each line and ground) | Approximately 60g | DC 60V (between each line and ground) | 10kA, 10 times (total value between 8 cores and shield to ground) |
1~100MHz: 32.3dB or more ~250MHz: 35.3dB or more ~500MHz: 26.7dB or more |
2,400mA (IEEE802.3af, IEEE802.3at, IEEE802.3bt) | DC~500MHz |
1~100MHz: 1.0dB or less ~250MHz: 2.0dB or less ~500MHz: 4.0dB or less |
500V or less (between each line and ground) |
Customers who viewed this product also viewed
Other products of Sankosha Co., Ltd.
View more products of Sankosha Co., Ltd.
About Company Handling This Product
- Japan