Lightning countermeasures SmartSPD for communication SMH-CLP series
Sankosha Co., Ltd.
About This Product
Communication SPD that protects communication lines and equipment from lightning surges
■Protection line
・Transmission line
・Instrumentation line
・Control line
・Telephone line
・DC signal line
■Features
- Comes with a lightning surge counter so you can see the protection effect
・Highly safe as the replacement recommendation display tells you when to replace the SPD before it deteriorates.
・Since it is a plug-in type, it is easy to maintain and economical.
・If you use a contact monitoring unit, you can also remotely monitor deterioration.
・Compatible with JIS category C2 and category D1
■Environmental conditions
・Place of use: Indoors
・Operating temperature/humidity: -20°C to +70°C/95% or less (no condensation)
・Storage temperature/humidity: -40°C to +70°C/95% or less (no condensation)
■SPD status display
You can check the SPD status by the LED display. The LED is always on when powered by an external power supply. If powered by a button battery, press the operation button once to turn on the light.
-
Product
Lightning countermeasures SmartSPD for communication SMH-CLP series
-
Handling Company
Sankosha Co., Ltd.
-
Categories
9 Models of Lightning countermeasures SmartSPD for communication SMH-CLP series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | AC durability (measurement conditions: performance: measurement location) | Impulse durability (measurement conditions: performance: measurement location) | Impulse reset (measurement conditions: performance: measurement location) | Insertion loss (measurement conditions: performance: measurement location) | Insulation resistance (measurement conditions: performance: measurement location) | Main uses | Mass | Maximum continuous working voltage UC | Overload failure mode | Rated current | Series resistance (measurement conditions: performance: measurement location) | Voltage protection level UP (measurement conditions: performance: measurement location) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SMH-CLP-H3 6V |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 2.5kA: 2 times (Category D1): Between ground |
DC48V, 260mA: 30ms or less: Between ground | DC~500kHz: 1.0dB or less: Between input and output | DC6V: 1MΩ or more: between lines | Transmission/instrumentation line | Approximately 120g | DC9V | Mode 1 | DC100mA | Per wire: 5Ω±10%: Between input and output (1 wire) | 1.2/50μs, 10kV: 80V or less: Between ground |
|
|
SMH-CLP-H3 12V |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 2.5kA: 2 times (Category D1): Between ground |
DC48V, 260mA: 30ms or less: Between ground | DC~1MHz: 1.0dB or less: Between input and output | DC13.5V: 1MΩ or more: between lines | Transmission/instrumentation line | Approximately 120g | DC13.5V | Mode 1 | DC100mA | Per wire: 5Ω±10%: Between input and output (1 wire) | 1.2/50μs, 10kV: 100V or less: Between ground |
|
|
SMH-CLP-H3 24V |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 2.5kA: 2 times (Category D1): Between ground |
DC48V, 260mA: 30ms or less: Between ground | DC~1MHz: 1.0dB or less: Between input and output | DC27V: 1MΩ or more: between lines | Transmission/instrumentation line | Approximately 120g | DC27V | Mode 1 | DC100mA | Per wire: 5Ω±10%: Between input and output (1 wire) | 1.2/50μs, 10kV: 120V or less: Between ground |
|
|
SMH-CLP-H3 48V |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 2.5kA: 2 times (Category D1): Between ground |
DC48V, 260mA: 30ms or less: Between ground | DC~1MHz: 1.0dB or less: Between input and output | DC52V: 1MΩ or more: between lines | Transmission/instrumentation line | Approximately 120g | DC52V | Mode 1 | DC100mA | Per wire: 5Ω±10%: Between input and output (1 wire) | 1.2/50μs, 10kV: 140V or less: Between ground |
|
|
SMH-CLP-N1 |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 1kA: 2 times (Category D1): Between ground |
DC48V, 260mA: 30ms or less: Between ground | DC~5MHz: 1.0dB or less: Between input and output | DC52V: 1MΩ or more: between lines | Transmission/instrumentation line | Approximately 120g | DC52V | Mode 1 | DC3A | 100mΩ or less: Between input and output (1 wire) | 1.2/50μs, 10kV: 500V or less: Between ground |
|
|
SMH-CLP-NM |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 1kA: 2 times (Category D1): Between ground |
DC48V, 260mA: 30ms or less: Between ground | DC~5MHz: 1.0dB or less: Between input and output | DC52V: 1MΩ or more: between lines | Transmission/instrumentation line | Approximately 120g | DC52V | Mode 1 | Because it is a bus wiring method, it does not affect the line current. | - | 1.2/50μs, 10kV: 500V or less: Between ground |
|
|
SMH-CLP-K2 |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 1kA: 2 times (Category D1): Between ground |
- | DC~10MHz: 1.0dB or less: Between input and output | DC180V: 100MΩ or more: between lines | Control line | Approximately 120g | DC180V, AC140V | Mode 1 | DC3A | Contact resistance 100mΩ or less: between input and output (1 wire) | 1.2/50μs, 10kV: 800V or less: Between ground |
|
SMH-CLP-EN |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 2.5kA: 2 times (Category D1): Between ground |
DC48V, 260mA: 30ms or less: Between ground | DC~10MHz: 1.0dB or less: Between input and output | DC180V: 1MΩ or more: between lines | Telephone line | Approximately 120g | DC180V | Mode 1 | DC100mA | Contact resistance per wire: 12Ω or less: Between input and output (1 wire) | 1.2/50μs, 10kV: 400V or less: Between ground |
|
SMH-CLP-DC |
Available upon quote | 50Hz, 0.5A, 1s: 5 times: between ground |
・8/20μs, 10kA: 10 times (Category C2): Between ground ・10/350μs, 1.8kA: 2 times (Category D1): Between ground |
- | DC~500kHz: 1.0dB or less: Between input and output | - | DC power supply | Approximately 120g | DC52V | Mode 1 | DC3A | Contact resistance 100mΩ or less: between input and output (1 wire) | 1.2/50μs, 10kV: 500V or less: Between ground |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sankosha Co., Ltd.
View more products of Sankosha Co., Ltd.
About Company Handling This Product
- Japan