Slide cylinder middle stroke cover type NSX series
NKE Corporation
About This Product
■Features
- The NSX type slide cylinder is a cover type of the NSB type slide cylinder, and the slide part of the NSB type is protected by covering the exposed slide shaft with a cover.
-The NSX type has the same length as the NSB type slide cylinder, and the mounting hole pitch is also the same.
・Since the slide part is overhanged to be covered with a cover, the load capacity is reduced compared to the equivalent NSB type.
・It cannot be used in the mounting direction where the two slide shafts are up and down.
-
Product
Slide cylinder middle stroke cover type NSX series
-
Handling Company
NKE Corporation
-
Categories
2 Models of Slide cylinder middle stroke cover type NSX series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient temperature (℃) | Body mass (kg) | CUSHION | Cylinder volume (cc) | Effective thrust (N) | Fluid used | Lubrication | Maximum load (N) | Mounting position | Repeatability (mm) | Speed (mm/sec) | Stroke (mm) | Working pressure (MPa) (kgf/c㎡) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
NSX40 |
Available upon quote | 5~60 | 8.0＋0.02×stroke mm | Fixed at both ends *Both cushion strokes are approximately 20mm. | 0.94×stroke mm | 470× (P-0.12) *P: Working pressure (MPa) | Clean air | Not required (if lubricating, use turbine oil equivalent to class 1) | 150 (up to 800 strokes) *Static load with horizontal mounting and no overhang. | The direction in which the two slide axes are up and down is not possible. | ±0.5 | 200~1,000 *All values are for horizontal installation and no load. | 100~1,000 (50 intervals) | 0.3~0.7 (3~7.1) |
|
|
NSX60 |
Available upon quote | 5~60 | 15.7＋0.03×stroke mm | Fixed at both ends *Both cushion strokes are approximately 20mm. | 2.52 x stroke mm | 1,260× (P-0.07) *P: Working pressure (MPa) | Clean air | Not required (if lubricating, use turbine oil equivalent to class 1) | 300 *Static load with horizontal mounting and no overhang. | The direction in which the two slide axes are up and down is not possible. | ±0.5 | 160~500 *All values are for horizontal installation and no load. | 100~1,000 (50 intervals) | 0.3~0.7 (3~7.1) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of NKE Corporation
View more products of NKE Corporation
About Company Handling This Product
- Japan