Slide cylinder middle stroke flat type SY series
NKE Corporation
About This Product
■Features
・This is a slide cylinder that is resistant to overhang loads, with a double speed mechanism adopted in the drive part, and a large distance between the slide axes and a low slide block height.
・The drive part and slide shaft are all covered and protected, so it can be used for a long time.
- A limit switch that detects both ends of the stroke and a damper that cushions the impact at both ends of the stroke can be installed.
-
Product
Slide cylinder middle stroke flat type SY series
-
Handling Company
NKE Corporation
-
Categories
3 Models of Slide cylinder middle stroke flat type SY series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Ambient temperature (℃) | Body mass (kg) | CUSHION | Cylinder volume (cc) | Effective thrust (N) | Fluid used | Lubrication | Maximum load (N) | Mounting position | Repeatability (mm) | Speed (mm/sec) | Stroke (mm) | Working pressure (MPa) (kgf/c㎡) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SY30 |
Available upon quote | 5~60 | 3.2＋0.008×stroke | Fixed at both ends (stroke 20mm each) | 0.45×stroke | 210× (P-0.21) *P: Working pressure (MPa) | Clean air | Not required (if lubricating, use turbine oil equivalent to class 1) | 45 (up to 400 strokes) | No limit | ±0.06 (±0.04 for pairing type) | 200~1,000 | 100~600 (50 intervals) | 0.3~0.7 (3~7.1) |
|
|
SY40 |
Available upon quote | 5~60 | 6.6＋0.01×stroke | Fixed at both ends (stroke 20mm each) | 0.94×stroke | 370× (P-0.17) *P: Working pressure (MPa) | Clean air | Not required (if lubricating, use turbine oil equivalent to class 1) | 150 (up to 800 strokes) | No limit | ±0.06 (±0.04 for pairing type) | 150~500 | 100~1,000 (50 intervals) | 0.3~0.7 (3~7.1) |
|
|
SY60 |
Available upon quote | 5~60 | 12.5＋0.0225×stroke | Both ends variable (stroke 20mm each) | 2.52 x stroke | 1,000× (P-0.1) *P: Working pressure (MPa) | Clean air | Not required (if lubricating, use turbine oil equivalent to class 1) | 300 | No limit | ±0.06 (±0.04 for pairing type) | 150~500 | 100~1,000 (50 intervals) | 0.3~0.7 (3~7.1) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of NKE Corporation
View more products of NKE Corporation
About Company Handling This Product
- Japan