Throw-in compatible optical dissolved oxygen sensor Visiwater DO Arc 120 FC10
T&C Technical Co., Ltd.
About This Product
Hamilton uses the advantages of optical dissolved oxygen sensors to measure dissolved oxygen in water, which was previously difficult to do. We have prepared a model that can be used in outdoor environments exposed to wind and rain.
■Features
・The sensor and sensor cable are integrated to realize an IP68 dust- and drip-proof structure. The sensor itself can be submerged in water.
- Can be used not only for measuring dissolved oxygen in water, but also for processes installed outdoors where there is wind and rain.
- The sensor body is made of stainless steel, so it has high durability against scratches and impacts.
・The sensor is calibrated before shipping, so it can be used immediately.
- Plug-and-play compatible that automatically recognizes when connected to a compatible monitor.
・In addition to portable measurement, it can also be used by directly incorporating it into the process.
-
Product
Throw-in compatible optical dissolved oxygen sensor Visiwater DO Arc 120 FC10
-
Handling Company
T&C Technical Co., Ltd.
-
Categories
1 Models of Throw-in compatible optical dissolved oxygen sensor Visiwater DO Arc 120 FC10
| Product Image | Part Number | Price (excluding tax) | 4-20mA output | Calibration certificate | Communication speed/baud rate | Consumables | Digital communication | Flow rate regulation | Fluorescent film format | Installation standards | Maximum water depth | Measurement error | Measurement principle | Measuring range | Operating temperature range | Option | Process pressure | Proofreading | Replacement guideline | Response time | Sanitary specifications | Sensor cable length | Sensor shaft length | Sensor shape | Storage temperature | Unit of measurement | Waterproof standard | Wetted parts |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
VDP-003 |
Available upon quote | Measured values can be output. | Calibration certificate included | 19,200bps | Fluorescent membrane cap | 2-wire RS-485 / Modbus RTU protocol | None This sensor does not consume oxygen in principle. | Silicon membrane H0 type (Option: Teflon membrane H2 type) | PG13.5 Parallel pipe thread *Sealing tape is not required. Seal the threaded part with an O-ring. | 9m |
1%-Vol ±0.05%-Vol / 21%-Vol ±0.2%-Vol / 50%-Vol ±0.5%-Vol / 100%-Vol ±10%-Vol *When the atmosphere is constant at 25℃ |
Optical | 4ppb~40ppm Resolution: 0.1ppb | 0℃~+60℃ | Holder (also serves as sensor tip protection) | -0.1~1.2MPa | Zero point calibration with sodium sulfite solution and saturated water vapor condition at the time of shipment from our company | Within 1 year *It may be shorter depending on usage conditions. | Within 30 seconds (90% response) *25℃ 100% nitrogen from atmosphere: Response time to anoxic state | None | 9.5m | 120mm | Sensor shaft diameter: 12mm | -10℃~50℃ *After use, please wash the parts that came into contact with the liquid and store it. | %-Saturation (% oxygen/air saturation concentration) / %-Vol (% oxygen concentration by volume) / ppm / μg/L / ppb | IP68 (dust-proof and drip-proof structure) | SUS316L (DIN1.4435), EPDM (FDA), Silicone (FDA), Cable: PUR |
Customers who viewed this product also viewed
Other products of T&C Technical Co., Ltd.
View more products of T&C Technical Co., Ltd.
About Company Handling This Product
- Japan