Electrodynamic dust monitor
KANSAI Automation Co., LTD.
About This Product
■Product overview
This is a high-resolution, highly stable dust monitor that is less susceptible to dust adhesion to the probe compared to the general triboelectric method and conventional optical detection methods.
■Features
- Almost unaffected by adhesion or dirt on the probe.
・Ultra high sensitivity 0.01 to 1,000mg/m^3
・High humidity gas can also be measured using special air purge (VIEW370/VIEW370 PLUS)
・Supports 16 channel sensor (VIEW370 PLUS)
・Common bus connection possible with our other models (VIEW370 PLUS)
■Operating principle
It uses electrostatic induction to detect the charge movement of particles such as dust flowing through pipes and flues without contact. This signal is measured and converted into an AC response. A special circuit cuts the frictional current that occurs when particles directly collide with the probe, resulting in a stable output.
-
Product
Electrodynamic dust monitor
-
Handling Company
KANSAI Automation Co., LTD.
-
Categories
5 Models of Electrodynamic dust monitor
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Allowable temperature | Cable specifications | Housing material | Installation method | Interface module Number of sensor connection points | Interface module display | Interface module housing material | Interface module memory capacity | Interface module permissible temperature | Interface module protection class | Interface module self-diagnosis function | Multi controller display | Multi-controller allowable temperature | Multi-controller housing material | Multi-controller memory capacity | Multi-controller protection class | Multi-controller self-diagnosis function | Probe length | Probe material | Protection class | VIEW370 Interface Module Power Supply | VIEW370 PRO Multi Controller Power Supply | VIEW370 PRO Multi-controller input | VIEW370 PRO Multi-controller resolution | VIEW370 PRO Number of sensor connection points | VIEW370 PRO multi-controller output | VIEW370 interface module output | VIEW370 interface module resolution |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
VIEW370 (absolute densitometer) |
Available upon quote | Ambient temperature: -25℃~+55℃ Exhaust gas duct internal temperature: -25℃~+250℃ (Standard specification) -25℃~+400℃ (Medium high temperature specification) -25℃~+800 (High temperature specification) | 4-core shielded cable 0.5sq 50Ω/km (max.1,000m single layout) | ADC (epoxy coating) | Screw-in R1・1/2 or more (small diameter can be manufactured as an option) | 1 point | LCD (bar graph, numbers, trends, etc.) | ADC (epoxy coating) | (1 sensor) Short term: 7 days @1 minute Pulse: 2 hours @1 second Alarm: 500 pieces | -25℃~+55℃ | IP65 | Communication/probe insulation ZERO/SPAN check | - | - | - | - | - | - | Max.1,500mm (separate discussion for items over 1,500mm) | SUS316/Teflon (Option: Teflon coating) | IP65 | AC90~260V 1A (50/60Hz) | - | - | - | - | - | DC4~20mA (isolated type, load resistance max.500Ω) Serial RS232C/RS485 relay contact 1cx2 (AC250V 2A) | < 0.01mg |
|
|
VIEW370PRO (absolute densitometer) |
Available upon quote | Ambient temperature: -25℃~+55℃ Exhaust gas duct internal temperature: -25℃~+250℃ (Standard specification) -25℃~+400℃ (Medium high temperature specification) -25℃~+800 (High temperature specification) | 4-core shielded cable 0.5sq 50Ω/km (max.1,000m single layout) | ADC (epoxy coating) | Screw-in R1・1/2 or more (small diameter can be manufactured as an option) | - | - | - | - | - | - | - | LCD (bar graph, numbers, trends, etc.) | -25℃~+55℃ | ADC (epoxy coating) | (4 sensors) Short term: 7 days @1 minute Pulse: 2 hours @1 second Alarm: 500 pieces | IP65 | Communication/probe insulation ZERO/SPAN check | Max.1,500mm (separate discussion for items over 1,500mm) | SUS316/Teflon (Option: Teflon coating) | IP65 | - | AC90~260V 1A (50/60Hz) | 4 digital inputs | <0.01mg | 1-16 points | DC4~20mA (isolated type, load resistance max.500Ω) Serial RS232C/RS485 Relay contact 1cx4 (AC250V 2A) | - | - |
|
|
Leak Alert73 |
Available upon quote | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
Leak Alert65-02 |
Available upon quote | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
VIEW Ex800 |
Available upon quote | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of KANSAI Automation Co., LTD.
View more products of KANSAI Automation Co., LTD.
