Thyristor type power regulator High-performance unit compatible with network CALPOTE
SANSHA ELECTRIC MANUFACTURING CO., LTD.
About This Product
■Features
Sansha Electric Seisakusho's thyristor power regulators are widely used in various fields due to their operability and high reliability. The "UG/UF series", developed based on many years of experience, uses Sansha Electric Seisakusho's thyristor module (insulated type) in the main circuit to make it smaller and lighter. Increased mounting density when mounting a large number of units on a control panel.
The control circuit section uses a digital control method. Equipped with a variety of protection functions and optional functions, it has achieved significant performance improvements.
1. Compatible with open field network
It is the first in the industry to be equipped with open network communications such as CC-Link. This function allows interconnection with control devices such as PCs and PLCs, making it easy to match with mechanisms.
2. We can also manufacture heater control panels.
Taking advantage of our strengths as an integrated factory with manufacturing capabilities ranging from sheet metal to busbars and harnesses, we also manufacture heater control panels that integrate peripheral circuits of power regulators and numerous units.
3. Single-phase model is equipped with a display panel as standard.
Various parameter settings and monitoring of voltage, current, and power values are possible.
-
Product
Thyristor type power regulator High-performance unit compatible with network CALPOTE
-
Handling Company
SANSHA ELECTRIC MANUFACTURING CO., LTD.
-
Categories
2 Models of Thyristor type power regulator High-performance unit compatible with network CALPOTE
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Accessories (per unit) | Control input | Control method | Current limit | Dielectric strength Dielectric strength voltage | Dielectric strength Insulation resistance | Input specifications Frequency | Input specifications Number of phases | Input specifications Voltage | Operating environment Ambient temperature | Operating environment Relative humidity | Output characteristics | Output specifications Current | Protection | Start/stop method | Usage environment Atmosphere |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
UG1 |
Available upon quote | Variable resistor (1kΩ) x 1pcs, knob x 1pcs |
1. ON/OFF signal A contact that turns ON when the temperature drops below the set temperature. 2.Current signal DC4~20mA (unit input resistance 250Ω) 3.Voltage signal DC1~5V, DC0~5V, etc. |
Phase control Cycle control (continuous type, intermittent type) Cycle control compatible with transformer load (special support UG1 only) |
UG1: Can be set to 10~110% of rated current (Phase control only) (Standard 110%, can be set arbitrarily on the display panel) |
AC2000V/min (100/200V system) AC2500V/min (400V system) |
20MΩ or more (DC500V megger) | 50/60Hz ±5% | Single phase, three phase |
100V series (100/110/120V ±10%) 200V series (200/220/254V ±10%) 400V series (380/400/440/460/480V ±10%) |
Operation: -10~50℃ Storage: -20~70℃ | 30~90%RH |
Linear characteristics ±3% F.S (at output 10~90%) Lower point setting: Setting the lowest value of output voltage Gradient setting: Maximum output voltage setting |
25/35/50/75A (natural cooling) 100/150/250/350/450A (wind cooling) 600/800/1200A (semi-standard/wind cooling) |
1.Overcurrent protection 2.Short circuit protection 3.Overheat protection (rated 100A units or more) |
Soft start/down method 0~300 seconds (Standard 0.5 seconds, can be set arbitrarily on the display panel) |
No corrosive gas, dust, or vibration |
|
|
UF3 |
Available upon quote | Variable resistor (1kΩ) x 1pcs, knob x 1pcs |
1. ON/OFF signal A contact that turns ON when the temperature drops below the set temperature. 2.Current signal DC4~20mA (unit input resistance 250Ω) 3.Voltage signal DC1~5V, DC0~5V, etc. |
Phase control Cycle control (continuous type, intermittent type) Cycle control compatible with transformer load (special support UG1 only) |
UF3: Can be set to 50~110% of rated current (Phase control only) (Standard 110%, can be set arbitrarily on the display panel) |
AC2000V/min (100/200V system) AC2500V/min (400V system) |
20MΩ or more (DC500V megger) | 50/60Hz ±5% | Single phase, three phase |
100V series (100/110/120V ±10%) 200V series (200/220/254V ±10%) 400V series (380/400/440/460/480V ±10%) |
Operation: -10~50℃ Storage: -20~70℃ | 30~90%RH |
Linear characteristics ±3% F.S (at output 10~90%) Lower point setting: Setting the lowest value of output voltage Gradient setting: Maximum output voltage setting |
25/35/50/75A (natural cooling) 100/150/250/350/450A (wind cooling) 600/800/1200A (semi-standard/wind cooling) |
1.Overcurrent protection 2.Short circuit protection 3.Overheat protection (rated 100A units or more) |
Soft start/down method 0~300 seconds (Standard 0.5 seconds, can be set arbitrarily on the display panel) |
No corrosive gas, dust, or vibration |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of SANSHA ELECTRIC MANUFACTURING CO., LTD.
View more products of SANSHA ELECTRIC MANUFACTURING CO., LTD.
