Constant temperature and humidity chamber for solar cell evaluation
EMIC CORPORATION
About This Product
This is a constant temperature and humidity chamber designed for solar cell module evaluation tests. Compatible with IEC, JIS, and UL standard tests (temperature cycle test, dew condensation freezing test, high temperature and high humidity test, etc.).
■Protective device
Earth leakage circuit breaker for power supply, reverse phase loss prevention device, overheat prevention device (electronic temperature controller, hydraulic temperature controller), thermal relay for motor overload protection, refrigerator protection device (for compressor overload protection) Thermal relay, high/low pressure switch) ・Circuit protector for thyristor overload short circuit protection, fuse for operating circuit protection, water pressure switch, dry firing prevention device (water cutoff relay, hydraulic temperature controller) ・Emergency stop switch
-
Product
Constant temperature and humidity chamber for solar cell evaluation
-
Handling Company
EMIC CORPORATION
-
Categories
1 Models of Constant temperature and humidity chamber for solar cell evaluation
| Product Image | Part Number | Price (excluding tax) | Blower | Body weight | Control panel | Cooling time | Cooling water | Equipment | Exterior material | Freezer | Heater | Heating time | Humidifier | Humidifying water connection port | Humidity range | Interior material | Loaded condition | Operating ambient temperature | Option | Power supply | Tank internal dimensions | Temperature and humidity fluctuation range | Temperature distribution accuracy | Temperature range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
PS-150W-5010ROS4 |
Available upon quote | Direct drive type 0.75kW 2 units | Approximately 2,200kg | LCD touch key program temperature controller | +90~-40℃ within 90 minutes (with load) |
IN50A (PT2″), OUT50A (PT2″) Required cooling water volume 220L/min (inlet water temperature 32℃) Required cooling tonnage 14RT |
Lead hole, total time meter, water supply and drainage hose | Stainless steel plate SUS403 hairline finish |
Water-cooled semi-hermetic compressor (R-404A) 10.5kW 1 unit Water-cooled scroll compressor (HFC-23) 7.4kW 1 unit Water-cooled hermetic compressor (R-407C) 2.2kW 1 unit |
Stainless steel sheathed heater 12kW 1 unit | -40~+90℃ within 90 minutes (with load) | Plug type sheathed heater 24kW 1 unit | Water supply port 15A (PT1/2″) nipple (socket), drain port 15A (PT1/2″) hose nipple | 40~95%RH | Stainless steel plate SUS304 | 15 solar cell modules + jig (1,700×1,200×150mm 20kg) | +5~+35℃ | Temperature and humidity recorder, sample installation rack, RO water production installation | AC200V, 3φ, 50/60Hz, 69kVA (approx. 199A) | W1,500×H2,000×D1,500mm | ±0.5℃・±3%RH | ±1.5℃ | -50~100℃ |
Customers who viewed this product also viewed
Other products of EMIC CORPORATION
View more products of EMIC CORPORATION
About Company Handling This Product
- Japan