Desktop CO2 Laser System HAJIME CL1 PLUS
Sakurai Co., Ltd.
About This Product
■About safety standards by laser class
There are eight levels of "safety standards for laser products" stipulated by JIS C 6802:2014. HAJIME CL1 PLUS has undergone compliance testing by Japan Quality Assurance Organization JQA and is compliant with Class 1.
■Measures to prevent damage caused by laser beams
The Ministry of Health, Labor and Welfare's "Measures to Prevent Hazards Due to Laser Beams" issued by the Ministry of Health, Labor and Welfare's Industrial Safety and Health Act stipulates specific measures to prevent injuries for laser devices other than Class 1 and Class 2.
■Safety design compliant with JIS class 1
・Laser leak prevention body
・Safety interlock
・Assist air flow
・Guide laser
■Ease of use for smooth operation
・500mm×300mm processing area
・Aluminum honeycomb table
・Processable thickness up to 130mm
・Fan & compressor
■Auto cooling system
Equipped with the industry's first automatic cooling unit equipped with a Peltier element. By passing the exhaust gas during processing through the heat sink, the Peltier element is efficiently cooled and the heat generated by the laser oscillator is suppressed. In addition, by maintaining the oscillator temperature appropriately, the laser power is also stabilized.
■Offset pin table
When processing resin-based materials such as acrylic by placing them directly on a honeycomb table, the pattern of the honeycomb table may be transferred to the back side of the material due to reflection of laser light and combustion gas and heat conduction from attached dirt. By using the optional offset pin table, it is possible to reduce pattern transfer on the back side.
■Fire detection system
The newly installed fire detection system uses an original detection method based on an original analysis of the algorithm that leads to ignition, in order to quickly detect dangerous flames caused by ignition and combustion. A flame sensor is used to distinguish between sparks during processing and flames caused by ignition and combustion, detecting fires in the early stages, and alerting with an alarm.
■Assist cone focus lens
Assist air that prevents material from igniting is narrowed down to a very fine cone nozzle and efficiently injected to the laser spot, reducing tar (yellowing) adhering to the processed surface, eliminating the need for masking tape or other curing. This will lead to increased work efficiency.
-
Product
Desktop CO2 Laser System HAJIME CL1 PLUS
-
Handling Company
Sakurai Co., Ltd.
-
Categories
4 Models of Desktop CO2 Laser System HAJIME CL1 PLUS
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Cooling device | Electric shock protection class | External dimensions | Guide laser | Installation conditions | Insulation performance | JIS laser class | Machining speed | Operating environment | Operation accuracy | Oscillator | Processing laser | Processing method | Processing size | Rated input | Rated voltage | Safety equipment | Storage environment | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAJIME CL1 PLUS |
Available upon quote | Built-in Peltier automatic cooling unit (20℃ cooling start, 18℃ cooling stop) | Class I equipment | Width 800mm x height 270mm x depth 500mm | Red diode (wavelength: 650nm) |
・Indoor use ・Pollution degree 2 ・Transient overvoltage category II ・Power supply voltage fluctuation ±10% |
L-FG:8MΩ, N-FG:8MΩ/125V DC/25℃/70%RH | Class 1 laser products |
Raster engraving: max. 300mm/s Vector cutting: max. 40mm/s |
・Temperature 13℃~30℃ ・Humidity 5%~80% (no condensation) ・Maximum operating altitude 2,000m ・Requires 65φ exhaust port ・Earth grounding required (Class D) |
Raster physical minimum step 0.0254mm (maximum resolution 1,000dpi) | Glass carbon dioxide oscillator maximum output 40W | Sealed carbon dioxide laser (wavelength: 10.6μm) | Plotter method with two-dimensional control in X and Y directions |
Raster engraving: Maximum width 490mm x height 300mm When cutting vectors: Maximum width 500mm x height 300mm |
Maximum 1,200W (when connected to compressor and exhaust fan) | Household power supply AC100V 50/60Hz (built-in power supply) | Fire detection system, safety interlock, flow sensor, malfunction prevention power switch, water temperature warning device |
・Temperature 5℃~45℃ ・Humidity 5%~80% (no condensation) |
35kg |
|
|
Software HARUKA |
Available upon quote | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
Air compressor |
Available upon quote | - | - | Width 90mm x height 95mm x depth 159mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
Exhaust fan |
Available upon quote | - | - | Width 280mm x height 420mm x depth 440mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Sakurai Co., Ltd.
View more products of Sakurai Co., Ltd.
About Company Handling This Product
- Japan