Ideal for automating earth continuity tests with constant current method Earth continuity tester TOS6200A
Kikusui Electronics Co., Ltd.
About This Product
The TOS6200A is a tester for conducting earth continuity tests required for Class I equipment under safety standards such as IEC, EN, VDE, BS, UL, JIS, and the Electrical Appliance and Material Control Law. Equipped with a newly developed high-efficiency power supply, it achieves a large output of 150VA while being smaller and lighter. The constant current method eliminates the need to reset the test current even if the resistance value of the test object changes. The test time can be set from 0.3s, making it ideal for production line tests that require short takt times.
In terms of operation, we have thoroughly pursued ease of use, including a large, easy-to-read display, a memory function that stores up to 100 test conditions, and the ability to program them for automatic execution. In addition, GPIB and RS-232C interfaces are included as standard, allowing external control of test conditions such as test current, judgment resistance value, and test time, as well as readback of measured values and test results.
A test lead is also included as standard, making it an attractive unit with high cost performance.
■Summary
・Test current value: AC3A ~ 30A, resistance value: 0.001Ω ~ 1.200Ω
・Can be judged based on resistance value and voltage drop
・Equipped with offset cancellation function
・Memorize 100 test conditions
・Test conditions can be programmed
・Equipped with contact check function
・GPIB, RS232C standard equipment
・Test lead standard equipment (TL11-TOS)
■Features
・Constant current test current
・Safe output voltage
・Reducing takt time
・High measurement accuracy
・Offset cancel function
・Easy operation
・Equipped with contact check function
・Memorize 100 test conditions
・Programming test conditions
・Equipped with memo function
・GPIB, RS-232C standard equipment
・Test lead included
-
Product
Ideal for automating earth continuity tests with constant current method Earth continuity tester TOS6200A
-
Handling Company
Kikusui Electronics Co., Ltd.
-
Categories
1 Models of Ideal for automating earth continuity tests with constant current method Earth continuity tester TOS6200A
| Product Image | Part Number | Price (excluding tax) | Output ammeter accuracy | Output ammeter hold function | Output ammeter measurement range | Output ammeter resolution | Output ammeter response | Output section Maximum rated output | Output section Output method | Output section current setting range | Output section distortion rate | Output section frequency | Output section open terminal voltage | Output voltmeter Offset cancellation function | Output voltmeter accuracy | Output voltmeter hold function | Output voltmeter measurement range | Output voltmeter resolution | Output voltmeter response | Pass/Fail Judgment Function Calibration | Pass/Fail Judgment Function Judgment Accuracy | Pass/Fail Judgment Function Judgment method based on resistance value | Pass/Fail Judgment Function Judgment method based on sampling voltage value | Pass/Fail Judgment Function LED | Pass/Fail Judgment Function Lower Reference Value (LOWER) Setting Range | Pass/Fail Judgment Function Resolution | Pass/Fail Judgment Function Upper Reference Value (UPPER) Setting Range | Resistance meter accuracy | Resistance meter hold function | Resistance meter measurement range | Resistance meter offset cancel function | Resistance meter resolution |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TOS6200A |
Available upon quote | ± (1% of reading +0.2A) | The measured current value at the end of the test is held during the PASS and FAIL periods. | 0.0Aac~33.0Aac | 0.1A | Average value response/effective value display (response time 200ms) | 150VA (at output terminal) | PWM switching method |
3.0Aac~31.0Aac (For resistors whose output is below the maximum rated output and whose output terminal voltage is 5.4V or below) Resolution: 0.1A Accuracy: ± (1% of setting + 0.2A) |
2% or less (at 0.1Ω pure resistive load of 10A or more) | 50Hz/60Hz sine wave (selectable) Accuracy: ±200ppm | 6Vrms or less | 0.000V~5.40V (with OFF function) | ± (1% of reading + 0.02V) | The measured voltage value at the end of the test is held during the PASS and FAIL periods. | 0.00Vac~6.00Vac | 0.01V | Average value response/effective value display (response time 200ms) | Calibration with sine wave rms value using pure resistive load | ± (2% of UPPER + 0.003Ω) |
Window comparator method ・Determined as FAIL when a resistance value higher than the upper limit reference value is detected. ・Determined as FAIL when a resistance value below the lower limit reference value is detected. ・When judged as FAIL, output is cut off and a FAIL signal is generated. |
Window comparator method ・Determined as FAIL when a voltage value higher than the upper limit reference value is detected. ・Determined as FAIL when a voltage value below the lower limit reference value is detected. ・When judged as FAIL, output is cut off and a FAIL signal is generated. |
PASS: Lights up for about 0.2 seconds or more when judged as PASS, lights continuously when set to PASS HOLD | 0.001Ω~1.200Ω | 0.001Ω | 0.001Ω~1.200Ω | ± (2% of reading + 0.003Ω) | The measured resistance value at the end of the test is held during the PASS period. | 0.001Ω~1.200Ω | 0.000Ω~1.200Ω (with OFF function) | 0.001Ω |
Customers who viewed this product also viewed
Other products of Kikusui Electronics Co., Ltd.
View more products of Kikusui Electronics Co., Ltd.
