Light source device for optical fiber SLG-150V-NIR
Revox Co., Ltd.
About This Product
■Near-infrared LED light source ideal for external and internal inspections
・Standard lineup of 9 wavelengths from 850nm to 1,550nm
・Ideal for replacing halogen light sources
・As it is an LED light source, it contributes to long-term operation and reduces heat damage to irradiated objects.
■Features
・Achieves output equivalent to or higher than a 150W halogen lamp
・Long lifespan of 30,000 hours
・Optical design optimized for various fibers
・Light level feedback function
・LED has the characteristic that the light intensity decreases due to aging (as the integrated time increases), so this function uses a unique technology to make it possible to correct the illuminance. It can be used while automatically maintaining a constant light intensity, making it ideal for use in locations where maintenance is difficult (such as clean rooms).
*Stabilization time depends on the dimming value when setting the calibration value.
*Other model numbers are available.
-
Product
Light source device for optical fiber SLG-150V-NIR
-
Handling Company
Revox Co., Ltd.
-
Categories
10 Models of Light source device for optical fiber SLG-150V-NIR
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Abnormal output signal | Accessories | CE marking | Compatible fiber diameter Fiber base, optical system | Cooling method | Dimming lock function | Dimming method External dimming | Dimming method Manual dimming | Dimming range | Electrical Appliance and Material Safety Law | Environmental regulations | Expected lifespan of LED (not guaranteed value) | External control connector | Input connector | Input voltage | Insulation voltage/insulation resistance (input-output, input-FG) | LED drive method | LED replacement | Mass | Material/Surface treatment | Power consumption (typ.) | Resolution | Risk group | Storage environment | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SLG-150V-850-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 30,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 95VA | 10bit (1,024 gradations) | Risk group 3 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150V-940-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 30,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 95VA | 10bit (1,024 gradations) | Risk group 3 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150V-1,060-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 23,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 110VA | 10bit (1,024 gradations) | Risk group 2 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150V-1,100-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 30,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 110VA | 10bit (1,024 gradations) | Risk group 2 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150V-1,150-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | - |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 115VA | 10bit (1,024 gradations) | Risk group 1 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150V-1,200-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | - |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 115VA | 10bit (1,024 gradations) | Not applicable | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150VFB-850-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 30,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 95VA | 10bit (1,024 gradations) | Risk group 3 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150VFB-940-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 30,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 95VA | 10bit (1,024 gradations) | Risk group 3 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150VFB-1,060-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 23,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 110VA | 10bit (1,024 gradations) | Risk group 2 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
|
|
SLG-150VFB-1,100-MN |
Available upon quote | LED temperature abnormal signal, LED error (open/short) | AC cord with 3P ground pole (maximum rating 125V 7A) 2m, instruction manual |
Safety standard: EN61010-1 compliant EMC standards: EN61000-6-2, EN61000-6-4, EN62311 compliant |
Fiber OF diameter φ8~φ14mm | Forced cooling | Valid during 0~5V analog dimming |
0~5V analog dimming 8Bit digital dimming 10Bit digital dimming Serial communication dimming (RS232C) ETHERNET dimming |
Dimming by panel rotary encoder operation | 0~100% | Technical standard compliance | RoHS compliant | 30,000 hours |
Digital dimming input: D-SUB25 (UL1977 certified, female 25 pin) x1 Serial dimming input: D-SUB9 (UL1977 certified, female 9 pin) x1 ETHERNET dimming input: RJ-45 |
AC input: 3P inlet EN60320-1 certified C14 type x 1 | AC100~240V (±10%), 50/60Hz |
AC1,500V/1 minute applied Cutoff current: 10mA or less DC500V / 1 minute applied 20MΩ or more |
Constant current method | This can be done by sending it back. | Approximately 3.9kg | Material: Aluminum alloy, Surface treatment: Red anodized | 110VA | 10bit (1,024 gradations) | Risk group 2 | Temperature -15℃~60℃, humidity 20~85% (no condensation) | Temperature 5~40℃, humidity 20~80% (no condensation) Altitude 2,000m or less |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Revox Co., Ltd.
View more products of Revox Co., Ltd.
About Company Handling This Product
- Japan