Capacitive position measurement for super-resolution microscopy P-545.xC8S PInano ® Cap XY (Z) Piezo System
PI Japan Co., Ltd.
About This Product
Capacitive position measurement for super-resolution microscopy
■Features
・Highest level of stability and reproducibility
・Maximum moving range is 200 µm × 200 µm × 200 µm
・Equipped with E-727USB controller and software
・Subnanometer resolution
・Fast response in millisecond range
・Thin and easy to install 20mm
・Embedded sample holder, infinitely rotating nosepiece
overview
High-resolution microscope/screening/scanning microscope/biotechnology/High reliability maintained even in high humidity environments
■High guiding accuracy with zero point flexure guide
Flexure guides are maintenance-free, friction-free, wear-free and require no lubrication. Due to its high rigidity, it can carry high loads and is insensitive to shock and vibration. It is 100% vacuum compatible and operates over a wide temperature range.
■Excellent lifespan with PICMA ® piezo actuator
All patented PICMA® piezo actuators are ceramic insulated. This protects against failure due to moisture and increased leakage current. PICMA® actuators offer up to 10 times longer lifespan than traditional polymer-insulated actuators. Proven to have never failed after 100 billion cycles.
■Sub-nanometer resolution using capacitive sensors
Capacitive sensors measure without contact with subnanometer resolution. Guarantees excellent linearity of movement, long-term stability and bandwidth (kH)
■Maximum accuracy through direct measurement
Motion is measured directly on the motion platform without being influenced by drive or guide elements. This provides optimal reproducibility, excellent stability, robust and fast-responsive control.
-
Product
Capacitive position measurement for super-resolution microscopy P-545.xC8S PInano ® Cap XY (Z) Piezo System
-
Handling Company
PI Japan Co., Ltd.
-
Categories
2 Models of Capacitive position measurement for super-resolution microscopy P-545.xC8S PInano ® Cap XY (Z) Piezo System
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Analog input/analog output | Built-in sensor | Cable length | Capacitance | Command set | Communication interface | Drive shaft | Mass | Material | Operating temperature range | Piezo ceramic | Piezo controller | Push/pull force capacity | Recommended load | Resolution (in closed loop) | Software driver | Supported features | Travel range (when closed loop) | User software |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
P-545.2C8S |
Available upon quote |
Sub-D 15 Input via 18-bit A/D converter Output via 20-bit D/A converter |
capacitance | 1.7 m | 6 (X, Y) µF | PI General Command Set (GCS) | Ethernet, USB, RS232, serial SPI high-speed interfaces | X, Y | 1kg | aluminum | 15~40℃ | PICMA P-885 | E-727.3CDA (included in delivery items) | 50/30N | 0.5kg | <1 nm | NI LabVIEW Drivers, Shared Libraries for Windows and Linux | Wave generator, data recorder, drift compensation, macro | 200 × 200 μm | PIMikroMove |
|
|
P-545.3C8S |
Available upon quote |
Sub-D 15 Input via 18-bit A/D converter Output via 20-bit D/A converter |
capacitance | 1.7 m | 6 (X, Y) , 12 (Z) µF | PI General Command Set (GCS) | Ethernet, USB, RS232, serial SPI high-speed interfaces | X, Y, Z | 1.2 kg | aluminum | 15~40℃ | PICMA P-885 | E-727.3CDA (included in delivery items) | 50/30N | 0.5kg | <1 nm | NI LabVIEW Drivers, Shared Libraries for Windows and Linux | Wave generator, data recorder, drift compensation, macro | 200 × 200 × 200 μm | PIMikroMove |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of PI Japan Co., Ltd.
View more products of PI Japan Co., Ltd.
About Company Handling This Product
- Japan