![[3-chamber electrolyzed water generator/hypochlorous acid water generator] Hygiene management and food cleaning Aqua Preeta KEW-A010 with two types of electrolyzed water: acidic and alkaline-KEW-A010-1A100](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3001201202311202.png)
[3-chamber electrolyzed water generator/hypochlorous acid water generator] Hygiene management and food cleaning Aqua Preeta KEW-A010 with two types of electrolyzed water: acidic and alkaline
KANAZAWA INDUSTRY Co., Ltd.
🍎
Food Industry Use
🛒
Retail & Distribution Use
♻️
Environment & Recycling Use
About This Product
Ideal for facilities with usage up to 300 liters per hour
《Point 1》
No chemicals are used, just electrolysis of salt and water.
Safe and convenient to use like tap water
《Point 2》
Simultaneously generates acidic and alkaline electrolyzed water
Efficient cleaning and sterilization with two powers
《Point 3》
Licensed by Toshiba
With the industry's highest level electrolytic cell
Solve the rust problem
■Characteristics of Aqua Preeta KEW-A010
・Space-saving design that does not take up much space
・You can finely select the amount and concentration produced.
・Compatible with cartridge water softener
・Compatible with nozzle, wall mount, and foot switch
■Caution
・Depending on the temperature and quality of tap water, electrolysis performance may decrease or the pH value may not be obtained. In such cases, water treatment using a water purifier may be necessary.
・When using acidic electrolyzed water as a food additive (sterilizing agent), please use it within the scope of the "Standards for Food and Additives" law.
・The effective chlorine concentration and pH vary depending on the quality of the raw water used. When using acidic electrolyzed water as a food additive (sterilizing agent), it may be necessary to check the quality of the raw water in advance.
■About maintenance
・The lifespan (estimate) of the electrolytic cell, which is the main consumable item, is approximately 2,000 hours or approximately 3 years, so regular maintenance (parts replacement, etc.) is required.
・Maintenance service is required when using the product.
-
Product
[3-chamber electrolyzed water generator/hypochlorous acid water generator] Hygiene management and food cleaning Aqua Preeta KEW-A010 with two types of electrolyzed water: acidic and alkaline
-
Handling Company
KANAZAWA INDUSTRY Co., Ltd.
-
Categories
-
Usage Scenarios
Food Industry Use / Retail & Distribution Use / Environment & Recycling Use
6 Models of [3-chamber electrolyzed water generator/hypochlorous acid water generator] Hygiene management and food cleaning Aqua Preeta KEW-A010 with two types of electrolyzed water: acidic and alkaline
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Acidic water Available chlorine concentration | Acidic water pH | Alkaline water (pH) | Amount of water produced Acidic water | Amount of water produced Alkaline water | Conditions of use Salt | Conditions of use Water absorption quality | Conditions of use Water suction pressure | Electrolysis method | Estimated electrolytic cell replacement | Peripheral equipment | Produced water temperature | Product dimensions | Product weight | Rated frequency | Rated power | Rated voltage | Safety equipment | Salt water supply method | Usage conditions Installation environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
KEW-A010-1A100 |
Available upon quote | Approximately 100mg/kg (ppm) | 2.7~6.5 (common) | 9.0~13.0 (common) | Approximately 1.5L/min | Approx. 0.5L/min (common) | Special grade purified salt (NaCL) purity 99.9% or more | Public tap water quality standards, hardness 1ppm or less, or pure water (RO water) | 0.15~0.35MPa | 2-partition 3-chamber type | Approximately 2,000 hours (electrolysis operation time) or approximately 3 years | A water softener (optional) is required (if the raw water hardness is 1ppm or more) *Not required when using pure water (RO water). | The temperature of the produced water depends on the temperature of the supply water and the temperature of the usage environment. | Width 309mm x Depth 162mm x Height 345mm | Approximately 9.3kg (dry weight) | 50/60Hz | Approximately 150W | AC single phase 100V | Electrolytic fuse 6A | Supplied with a hose from an external salt water tank (make salt water and connect the salt water supply hose) | Ambient temperature 0~35℃, humidity 70% or less (no condensation), water supply temperature 5~35℃ |
|
|
KEW-A010-1A50 |
Available upon quote | Approximately 50mg/kg (ppm) | 2.7~6.5 (common) | 9.0~13.0 (common) | Approximately 1.5L/min | Approx. 0.5L/min (common) | Special grade purified salt (NaCL) purity 99.9% or more | Public tap water quality standards, hardness 1ppm or less, or pure water (RO water) | 0.15~0.35MPa | 2-partition 3-chamber type | Approximately 2,000 hours (electrolysis operation time) or approximately 3 years | A water softener (optional) is required (if the raw water hardness is 1ppm or more) *Not required when using pure water (RO water). | The temperature of the produced water depends on the temperature of the supply water and the temperature of the usage environment. | Width 309mm x Depth 162mm x Height 345mm | Approximately 9.3kg (dry weight) | 50/60Hz | Approximately 150W | AC single phase 100V | Electrolytic fuse 6A | Supplied with a hose from an external salt water tank (make salt water and connect the salt water supply hose) | Ambient temperature 0~35℃, humidity 70% or less (no condensation), water supply temperature 5~35℃ |
|
|
KEW-A010-1A35 |
Available upon quote | Approximately 35mg/kg (ppm) | 2.7~6.5 (common) | 9.0~13.0 (common) | Approximately 1.5L/min | Approx. 0.5L/min (common) | Special grade purified salt (NaCL) purity 99.9% or more | Public tap water quality standards, hardness 1ppm or less, or pure water (RO water) | 0.15~0.35MPa | 2-partition 3-chamber type | Approximately 2,000 hours (electrolysis operation time) or approximately 3 years | A water softener (optional) is required (if the raw water hardness is 1ppm or more) *Not required when using pure water (RO water). | The temperature of the produced water depends on the temperature of the supply water and the temperature of the usage environment. | Width 309mm x Depth 162mm x Height 345mm | Approximately 9.3kg (dry weight) | 50/60Hz | Approximately 150W | AC single phase 100V | Electrolytic fuse 6A | Supplied with a hose from an external salt water tank (make salt water and connect the salt water supply hose) | Ambient temperature 0~35℃, humidity 70% or less (no condensation), water supply temperature 5~35℃ |
|
|
KEW-A010-2A50 |
Available upon quote | Approximately 50mg/kg (ppm) | 2.7~6.5 (common) | 9.0~13.0 (common) | Approximately 3.0L/min | Approx. 0.5L/min (common) | Special grade purified salt (NaCL) purity 99.9% or more | Public tap water quality standards, hardness 1ppm or less, or pure water (RO water) | 0.15~0.35MPa | 2-partition 3-chamber type | Approximately 2,000 hours (electrolysis operation time) or approximately 3 years | A water softener (optional) is required (if the raw water hardness is 1ppm or more) *Not required when using pure water (RO water). | The temperature of the produced water depends on the temperature of the supply water and the temperature of the usage environment. | Width 309mm x Depth 162mm x Height 345mm | Approximately 9.3kg (dry weight) | 50/60Hz | Approximately 150W | AC single phase 100V | Electrolytic fuse 6A | Supplied with a hose from an external salt water tank (make salt water and connect the salt water supply hose) | Ambient temperature 0~35℃, humidity 70% or less (no condensation), water supply temperature 5~35℃ |
|
|
KEW-A010-2A35 |
Available upon quote | Approximately 35mg/kg (ppm) | 2.7~6.5 (common) | 9.0~13.0 (common) | Approximately 3.0L/min | Approx. 0.5L/min (common) | Special grade purified salt (NaCL) purity 99.9% or more | Public tap water quality standards, hardness 1ppm or less, or pure water (RO water) | 0.15~0.35MPa | 2-partition 3-chamber type | Approximately 2,000 hours (electrolysis operation time) or approximately 3 years | A water softener (optional) is required (if the raw water hardness is 1ppm or more) *Not required when using pure water (RO water). | The temperature of the produced water depends on the temperature of the supply water and the temperature of the usage environment. | Width 309mm x Depth 162mm x Height 345mm | Approximately 9.3kg (dry weight) | 50/60Hz | Approximately 150W | AC single phase 100V | Electrolytic fuse 6A | Supplied with a hose from an external salt water tank (make salt water and connect the salt water supply hose) | Ambient temperature 0~35℃, humidity 70% or less (no condensation), water supply temperature 5~35℃ |
|
|
KEW-A010-3A30 |
Available upon quote | Approximately 30mg/kg (ppm) | 2.7~6.5 (common) | 9.0~13.0 (common) | Approximately 5.0L/min | Approx. 0.5L/min (common) | Special grade purified salt (NaCL) purity 99.9% or more | Public tap water quality standards, hardness 1ppm or less, or pure water (RO water) | 0.15~0.35MPa | 2-partition 3-chamber type | Approximately 2,000 hours (electrolysis operation time) or approximately 3 years | A water softener (optional) is required (if the raw water hardness is 1ppm or more) *Not required when using pure water (RO water). | The temperature of the produced water depends on the temperature of the supply water and the temperature of the usage environment. | Width 309mm x Depth 162mm x Height 345mm | Approximately 9.3kg (dry weight) | 50/60Hz | Approximately 150W | AC single phase 100V | Electrolytic fuse 6A | Supplied with a hose from an external salt water tank (make salt water and connect the salt water supply hose) | Ambient temperature 0~35℃, humidity 70% or less (no condensation), water supply temperature 5~35℃ |
Click on the part number for more information about each product
Customers who viewed this product also viewed
![[Three-chamber electrolyzed water generator/hypochlorous acid water generator] Hygiene management and food cleaning Aqua Preeta KEW-A009 with two types of electrolyzed water: acidic and alkaline-KANAZAWA INDUSTRY Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3001201202311201.png)
Other products of KANAZAWA INDUSTRY Co., Ltd.
![[Three-chamber electrolyzed water generator/hypochlorous acid water generator] Hygiene management and food cleaning Aquapurita KEW-B011 with two types of electrolyzed water: acidic and alkaline-KANAZAWA INDUSTRY Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3001727202402291.png)
View more products of KANAZAWA INDUSTRY Co., Ltd.
