Heated sample changer XSAMPLE 630 that can be handled even with high viscosity samples
Anton Paar GmbH
About This Product
■ A multi -sample changer that can be handled even with endless highly viscous samples
The XSAMPLE 630 has 36 heated sample slots and can be filled with any master device of Anton Pearl. Improving heating performance can reduce heating time, save time, and improve throughput. It can be heated to up to 95 ° C. Even samples that are difficult to handle can be strictly based on the ASTM standard. With a robust design, maintenance -free and reliable operation is possible.
If you use a removable magazine equipped with a non -heated position, you will not need to prepare a second measurement system because it can save time by efficient sample handling.
■ Improvement of heating performance
・ Heat in a short time and measure immediately
・ Delicate samples (wax, etc.) can be measured using optional heated drain hoses.
・ It can be heated up to 95 ° C, stable at high temperatures
・ Realize low power consumption by eight independent heating circuits
■ Simple handling
・ Collect heated samples safely with a removable magazine with a heat -resistant handle.
・ Completely automate measurement in 36 heating positions
・ If you use an optional non -heated position for samples measured at room temperature, you do not need to prepare a system separately.
・ Because of the heating method, it does not take much time to conservative. There is no aquarium that requires regular inspection.
■ Prevents pollution with high cleaning ability
・ Needle cleaning is carried out on the inside and outside to prevent sample contamination and guarantee high accuracy.
・ Use up to 3 types of solvent in any order to achieve ideal cleaning performance
・ Exhibits optimal cleaning capabilities by combining cleaning mode in arbitrary order.
・ Automatic washing immediately after measurement to extend the operating time
■ Compatible device
・ DMA
・ SVM2001
・ SVM3001
・ SVM4001
・ Lovis2000m/me
■ Related products
・ Xsample530
・ Xsample340
・ Xsample320
・ XSAMPLE330
・ XSAMPLE520
-
Product
Heated sample changer XSAMPLE 630 that can be handled even with high viscosity samples
-
Handling Company
Anton Paar GmbH
-
Categories
1 Models of Heated sample changer XSAMPLE 630 that can be handled even with high viscosity samples
| Product Image | Part Number | Price (excluding tax) | Altitude | Ambient temperature | Automatic filling and drying | Compressed air supply (optional) | DMA M viscosous range 2 BAR When operation using external compression air | Environmental conditions (en 61,010) | Filling mode | Humidity | Magazine only in the number of sample vials heating | Maximum temperature | Maximum temperature of heated parts (when malfunction) | Overvoltage category | Pollution | Power supply part | Required air quality | SVM X001 viscosity range | Sample Vial Number of XSAMPLE Heat/non -heated position | Sample amount per measurement | Standard | When driving using a built -in air pump with a built -in viscosity range of DMA M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
186612 |
Available upon quote | Up to 3,000 m | 15 ~ 35 ℃ | Can be selected from the built -in air pump or compressed air of the master device | Up to 2.0 BAR (relative pressure) | Up to 36,000 mpa.s (at heat temperature and measured temperature 95 ° C) | Limited use of indoor use | Pressure mode (using integrated piston pump, air pump of master device, compressed air) | Relative humidity 10-90 %, no condensation | 12 ML 36 vials (only glass vials can be used) | 95 ° C (peripheral temperature 20 ° C, no cooling) | 160 ° C (320 ° F) | II | 2 | Power supply is supplied from the master device and Xsample heating controller | ISO 8573-1 class 3 compliant, maximum particle size: 5 µm, maximum pressure dew point: -20 ° C, maximum oil content: 1 mg/m3 | 0.2 ~ 5,000 mpa.s (at heat temperature and measured temperature 95 ° C) | 12 ML 32 vials (for heating) /12 ML Vial (for non -heating) (only glass vial can be used) | DMA M (about 3.5 ml when use, about 5 ml when using SVM X001) | ASTM (D4,052, D5,002, D7,042) | Up to 10,000 mpa.s (at heat temperature and measured temperature 95 ° C) |
Customers who viewed this product also viewed
Other products of Anton Paar GmbH
View more products of Anton Paar GmbH
About Company Handling This Product
- Austria