Ground fault voltage relay LVG-7E series-LVG-7E
Ground fault voltage relay LVG-7E series-Hikari Shoko Co., Ltd.

Ground fault voltage relay LVG-7E series
Hikari Shoko Co., Ltd.


About This Product

JIS C 4609 Ground fault directional relay equipment for high voltage power receiving equipment When connecting solar power generation or other power generation equipment to the grid, ground fault voltage protection is required depending on the output capacity. ■Features - Has high noise resistance and is not easily affected by noise such as radio waves and surges. ・ZPC-9B is used for the zero-phase capacitor. Compatible with ZPC-9B. - Operating sensitivity and operating time are 5-point switchable. ・The return method is automatic/manual switching type. ・The control power supply AC110V and AC220V are terminal connection switching type. ・It is a harmonic countermeasure product. -The mounting hole dimensions are the same as LVG-7. ・This is an environmentally friendly product (compliant with the European RoHS Directive). ■Operation LVG-7E protects high-voltage power lines from ground faults and is used in combination with a zero-phase capacitor (ZPD). When a ground fault occurs in the electrical circuit, a voltage is generated at the secondary terminals of the ZPD. After adjusting the sensitivity of this secondary output, the amplifier circuit amplifies it, the level detection circuit determines its magnitude, and the switching circuit operates the operation indicator and output contact. After operation, the LVG-7E is an automatic/manual return switch type, so if it is set to manual, the operation indicator and output contact will not return until the test/return is turned to the return side. If set to automatic, the output contact and operation display will return to normal when the ground fault is removed. Please note that when the test/return switch is turned to the test side, the output contacts will operate. Also, please be aware that if the ground capacitance of the electrical circuit is low and unbalanced, Vo may be generated and the product may operate. ■Features ・For ground fault voltage protection for solar power generation and other systems. - Automatic/manual return switching method. - Compliant with "JIS C 4609 Earth fault directional relay device for high voltage power receiving".

  • Product

    Ground fault voltage relay LVG-7E series

Share this product


30+ people viewing


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of Ground fault voltage relay LVG-7E series

Product Image Part Number Price (excluding tax) Commercial frequency withstand voltage Control voltage Exterior color Frequency Insulation resistance Mass Operating temperature range Operating time error 150% of the set voltage value Operating time setting value Operating voltage setting (% of full earth fault voltage) Operating voltage tolerance Operation display Display method Operation display Return method Output contact closing capacity Output contact configuration Output contact return method Output contact switching capacity Power consumption Always Power consumption during operation Test method
Ground fault voltage relay LVG-7E series-Part Number-LVG-7E

LVG-7E

Available upon quote Between the electric circuit and the outer box
AC2,000V for 1 minute
AC110V, AC90~120V
AC220V, AC180~240V
Black (ABS resin) 50/60Hz Between the electric circuit and the outer box
20MΩ or more with DC500V megger
Approximately 0.9kg -20℃~+60℃ Setting value 0.1s: 0.1 or less
Setting value 0.2s: 0.1~0.2
Setting value 0.5s: 0.4~0.6
Setting value 0.8s: 0.7~0.9
Setting value 1.0s: 0.95~1.1
0.1-0.2-0.5-0.8-1.0 (s) 2.5-5-7.5-10-15 (%) ±25% of the set voltage value Light emitting diode display (red) Automatic/manual return switching
Test/reset switch (also used) when returning manually
DC140V 5A 0.2s, L/R=7ms 2c Automatic/manual return switching
Test/reset switch (also used) when returning manually
AC110V/220V 5A, cosφ=1 2/1.5A, cosφ=0.4
DC100V 0.6A,L/R=1ms 0.2A,L/R=7ms
4.4VA (AC110,AC220V) 5.5VA (AC110,AC220V) Test/reset switch (combined)

Customers who viewed this product also viewed

Other products of Hikari Shoko Co., Ltd.


View more products of Hikari Shoko Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree