Sera coat 31 | Forming a hard and adhesive film for heat -resistant coating agent metal
Edec Co., Ltd.
Price (excluding tax)
Model Description
■ Overview Cerracoat 31 is a ceramic coating agent that protects steel and stainless steel under ultra -high temperature (1,300 ° C) from high -temperature rot food. Based on several kinds of ceramic mixtures, such as alumina and silica, it forms a hard gray film. The film has a strong adhesion, features a certain amount of deflection and the lowest thermal conductivity among metal -targeted ceramic paint. Since the expansion coefficient is almost equal to stainless steel, it is suitable for heat resistance, insulation, wear resistance, and adhesion prevention of steel and stainless steel. A gray ceramic film is created on the surface of steel and stainless steel by spraying, spray, and stainless steel surface like water -based paint. ■ Characteristics -It can be applied with brushes and brushes, diluted with water and can be applied with dipping or spray. ・ Close to the surface of steel and stainless steel. ・ Hygroscopic properties remain if only at room temperature drying, but when fired at about 400 ° C, moisture absorption eliminates. -The film after firing is resistant to acid (excluding fluffy acid), alkali, most drugs, and is not wet with molten metals. ・ The color of the film is gray. ・ If it is completely fired at 500 ° C or higher, it can be used even in vacuum and inert gas. ・ It is single -liquid. ■ Use ・ Protection from high -temperature rot food phenomenon of steel and stainless steel products. Especially for protection at the high temperature of the following equipment. ・ Boiler, exhaust device, garbage incineration equipment, furnace, dielectric coil, chimney, kiln, burner, pipe, tray and rack
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Cure shrinkage
Effective storage period
Heat -resistant shock
Heat expansion coefficient
Heatproof temperature
Insulated destructive voltage (KV/mm)
Main binder (binding agent)
Main ingredient (filler)
PH
Processing area per 1L (M^2/L)
Standard film thickness
The hardness of the generated film (Morse)
Volume-specific resistance (OHM-CM, room temperature)
capacity
chemical resistance
color
Firing temperature
Particle size (μ)
-
Part Number
Sera coat 31
-
Handling Company
Edec Co., Ltd.
Forming a hard and adhesive film for heat -resistant coating agent metal Sera coat 31's performance table
Items marked with have different values depending on the model number.
| Product Image | Price (excluding tax) | Effective storage period | Firing temperature | Heat expansion coefficient | Heatproof temperature | Main ingredient (filler) | PH | Processing area per 1L (M^2/L) | The hardness of the generated film (Morse) | capacity | color |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Available upon quote | One year | 400 ° C or higher | 11.2x10^-6 | 1,200 ° C (continuation), 1,300 ° C (intermittent) | Ceramic powder, metal oxide | 10 ~ 11 | 3 ~ 5 | 6 | 500ml, 1L, 1 Gallon (approximately 4L) are all in the wide mouth poly container | gray |
There are 3 models for this product.
Customers who viewed this product also viewed
Other products of Edec Co., Ltd.
View more products of Edec Co., Ltd.
About Company Handling This Product
- Japan
- Since 1973
- 14 employees