KR-303 | Rubber molding, zinc / aluminum die -cast casting molded mold cleaning agent
TAIYO CHEMICALS & ENGINEERING CO.,LTD.

---

Price (excluding tax)

Estimate Required

---

Model Description

As a rubber mold cleaning agent, the cleaning properties have been highly evaluated by the number of years of achievements. In addition, since the Sun -Ekon KR -303 is water -soluble, it is a cleaning agent that can be diluted with water according to the degree of dirt. ■ Use Molded molded molded carbonized vulcanized vulcanized and sorting agents can be removed instantly. In addition, mild red rust can also be removed at the same time. * Other applications: Mold cleaning for resin molding (ultrasonic cleaning), carbon removal, degreasing cleaning ■ How to use ・ Washing When the mold is hot (mold temperature of 100 ° C or higher), apply the undiluted or diluted solution to the mold surface. The dirt will be softened, so wash it before the dirt is dry. * Since the washed liquid can be used repeatedly, we recommend that you install a cleaning tank that can extract the liquid and attach the drain to the bottom. ・ Immersed and washed Heated (70-100 ° C) by putting a stock solution or diluted solution in a stainless steel tank. Dip the mold in the appropriate temperature. The dirt will be released, so take out the mold later and wash it with water. * Water evaporates due to heating, so please replenish water and adjust the liquid surface. * If there is no heating equipment, it is also possible to immerse the mold in a hot (mold temperature of 100 ° C or higher) in a normal temperature liquid. * Brushing should be used as necessary for the washing and immersion and washing. Please note that the product GHS label precautionary note when using it. The San Ekon KR -6150 corresponds to the Poison Theater Control Law. Please refer to the safety data sheet (SDS) for details on safety and related laws. ■ Ingredients and precautions Please note that the product GHS label precautionary note when using it. The San Ekon KR -6150 corresponds to the Poison Theater Control Law. Please refer to the safety data sheet (SDS) for details on safety and related laws. 1. After cleaning, please wash sufficiently. 2. When wiping with a mold with a hot mold is hot, the chemical fibers may react to heat and generate gas, so use a cotton material. 3. Do not use aluminum and zinc, as it dissolves when it comes into contact. ■ Product type ・ Domestic use: 20kg (can) ・ Export for export: 24kg (UN can)

---

Model Filter

You can search for other models from each index. The displayed value is the value of the currently selected part number.

See all 8 models in list

---

• Part Number

  KR-303

• Product

  Rubber molding, zinc / aluminum die -cast casting molded mold cleaning agent

• Handling Company

  TAIYO CHEMICALS & ENGINEERING CO.,LTD.

---