Hydraulic all-purpose test machine MR3A-F2 Series 100-200KN
Front -free release type chuck
・ Since the chucking of the test piece is possible with one touch, there is no set mistake in the test piece, and the grab is monitored until the end of the exam.
Hybrid horizontal opening / closing charcing device
-The company's proprietary hybrid chuck device, which combines horizontal movement and the strengths of wedge -shaped carriers, allows the chuck claw to open and take off the test pieces simply by opening a little horizontally, and does not have a hard time deciding on the top and bottom and back and back of the test piece.
・ Because there is no movement of the nails when the test piece is handled like an old -fashioned wedge -shaped chuck, the positioning is easy and the thin plate test piece does not occur.
Chuck claws No replacement required
・ A wide range of testing pieces are used in one type of nails and the replacement of nails is small.
CIA Electric Servo Organization with low power consumption
-The automatic control mechanism is not a flow control using a conventional servo valve, but an efficient operation of the company's unique back pressure and load pressure, so it can operate efficiently and consume less power.
Automatic and manual mixing tests can be performed
・ During the automatic load test, you can switch to manual mode instead of reset and continue the test in order to respond to unexpected dialogue changes or change of test control.
Tilt -type operation panel and large LCD touch panel (Japanese dialogue type)
-The operation panel is 30 degrees, so it has good visibility and can be simple operation with a Japanese dialogue type touch panel.
Model Filter
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Body dimension H × W × D mm
Calibration compression pressure plate 1 set
Compression interval mm
Digital testing power display
Effective column interval mm
Lamb speed mm/min
Maximum capacity kn
Measurement accuracy
PN3129
Power capacity _3 phase 200V KVA
Power supply capacity _ single -phase 100V KVA
Pulling interval mm
Purbent claws _ for flat materials W x (T) mm
Purbent claws _ round material MM
Rum Stroke MM
Weighing (6 steps) Kn
control method
PN3160
Purtimate claw for tensile tests _ round material thick diameter MM
PN3529
Body dimension H × W × D*3 mm
Compression -bearing pressure plate upper and lower pairs for calibration
Switching output by IO-Link and analog output (can be set)
Show the acceptable range in red/green display
The connection can be rotated at the optimal angle
Excellent long -term stability with high overload protection
A robust design that can be used in a harsh industrial environment
Tightening torque [NM]
30-50, (Recommended tightening torque, packing lubricating oil, seal, tolerance pressure.)
This is the version of our website addressed to speakers of English in
the United States.
If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.