318U | Hot melt adhesive
Sanyo Life Material

Price (excluding tax)

Model Description

■Features and uses UL94V-0 acquisition for fixing electronic components High heat resistance UL94V-2 equivalent ・ Fixed / anti -vibration reinforcement of electronic components on the foundation (PC board). ・ Reinforcement and insulation of soldering portions. ・ Filling and insulation and sealing of the coil, connector and harness unit. ・ Wire cable unity and fixed -loosening prevention. ■TN-M18-H1147 HF read/write head ・Cylindrical type, M18×1 ・Brass, chrome plated ・Power supply and operation are possible only when connected to the BLident interface. ・M12×1 connector, only connected by BLident extension cable ■TN-M18-H1147/C53 (0) HF read/write head For bus line topologies using TBEN-* ・Cylindrical type, M18×1 ・Brass, chrome plated ・No terminating resistor (separate terminating resistor is required) ・This device can only operate when connected to TBEN-S*-2RFID-* or TBEN-L*-4RFID-* using line wiring. ・Up to 32 nodes/lines or connections ・Requires corresponding terminating resistor (see accessories) ・Observe the performance of the power supply and the maximum current capacity of the cable, especially when turning on the power ・Ensure that the voltage drop on the line is within the specified range. ・Spur line: max. 2m ・Maximum bus length: 50m ・By default, commands can only be processed by one read/write head, so HF bus mode is suitable for static and slow dynamic applications ・In continuous HF bus mode, commands are executed simultaneously on all read/write heads in the bus topology. The recorded data is stored in the module's ring buffer Read/write heads are automatically assigned addresses ・Addresses can be parameterized for different application requirements ・Power supply and operation are possible only when connected to the BLident interface. ・M12×1 male, connected by RFID cable ■TN-M18-IOL2-H1141 (0) HF read/write head IO-Link ・Cylindrical type, M18×1 ・Brass, chrome plated ・Process value in 32-byte IO-Link telegram ・Can operate in SIO mode ・Output of RSSI value ・Alarm output, parameter setting possible (RSSI threshold, etc.) ・Password functionality to access tags (separate hardware must be used to enable password functionality) ・Operation time counter ・M12×1 male connector, 4 pins