Price (excluding tax)
Simple Premelter that can be used only by power supply Can be used only with 100V power supply without the need for compressed air. Simple hot melt preheaters. Hot of all shapes A large amount of application is required to keep the melt melted. Ideal for applications. State with cancer set on the holder just below the discount exit When the manual piston pump is moved up and down, it melts. A mechanism where Tomelt is supplied to the gun tank.
You can search for other models from each index. The displayed value is the value of the currently selected part number.
Body weight
Cable (stand -body)
Corresponding adhesive
Dissolve discharge ability
Used power supply
heater
Power cord
Used air pressure
tank capacity
Heater capacity
Setting temperature range
TB-EM18WD-H1147-EX
TB-EM18WD-H1147-EX/C53
size
Discharge method
TB-EM30WD-H1147-EX
TB-EM30WD-H1147-EX/C53
TB-M18-H1147
TB-M18-H1147/C53
TB-M30-H1147
TB-M30-H1147/C53
Appearance
Evror coefficient (butyl acetate = 1)
Flash point PMCC
Insulated strength
Solution of water
Specific gravity (1 5 ゜ c)
Steam density (air = 1)
Vapor pressure
Volcanoity (volume)
smell
Coagulation point
PH
boiling point
Part Number
Desktop type application VSB40Handling Company
Sanyo Life MaterialItems marked with have different values depending on the model number.
Product Image | Price (excluding tax) | Body weight | Discharge method | Heater capacity | Setting temperature range | TB-EM30WD-H1147-EX | TB-EM30WD-H1147-EX/C53 | Used power supply | size | tank capacity |
---|---|---|---|---|---|---|---|---|---|---|
Available upon quote | 11kg | Manual piston pump | 800W | 20-150 ° C (Optional specification is 180 ° C) | HF reading/writing head For explosion -proof areas or extreme requirements (food industry, etc.) M30 × 1.5, cylindrical type Stainless steel, 1.4404 LCD polymer front cap High protection grade: IP69K Special double lip sealing Protection against general acidic and alkaline cleaning agents Compatible with the use of the food industry Laser engraved with very little laser Power supply and operation can only be made when connecting to Blident interface Connect only by M12 × 1 connector, Blident extension cable ATEX, Category II3G, EX Zone 2 ATEX, Category II3D, EX Zone 22 | HF reading/writing head For explosion-proof areas or extremely requirements (food industry, etc.) and for bath line porridge using TBEN-* M30 × 1.5, cylindrical type Stainless steel, 1.4404 LCD polymer front cap High protection grade: IP69K Special double lip sealing Protection against general acidic and alkaline cleaning agents Compatible with the use of the food industry Laser engraved with very little laser No terminal resistance (separate end resistance is required) This device can be operated only by connecting to tben-s*-2rfid-*or tben-l*-4rfid-*. Up to 32 node/line or connection Supported terminal resistance is required (see accessories) In particular, please follow the performance of the power supply equipment and the maximum current capacity of the cable when turning the power. Please make sure that the voltage drop on the line is within the regulations Sparrine: Up to 2m Maximum bus length: 50m By default, the commands can only be processed by one read/write head, so HF bus | AC100V | W290 (including handle) x D255 x H320mm | 4ℓ |