Rinos Co., Ltd.'s Company Profile and Products
Profile
| Country | Japan |
|---|---|
| Founded | 1999 |
| Company Type | Manufacturer |
| Website | Rinos Co., Ltd. Website |
Products Handled By Rinos Co., Ltd.
2136 registered products of Rinos Co., Ltd.
Filter
Filter products
Rinos Co., Ltd.
MEGA Drillleymer H7 M2253 3XφD external refueling
■ Characteristics ・ H7 accuracy is used for a wide range of materials from steel to stainless steel with high -precision touri...
Rinos Co., Ltd.
MEGA Dreamleemer H7 M2353 3XφD external refueling shank
■ Characteristics ・ H7 accuracy is used for a wide range of materials from steel to stainless steel with high -precision touri...
Rinos Co., Ltd.
MEGA Dreamleemer H7 M2254 5XφD external refueling equivalent sunk
■ Characteristics ・ H7 accuracy is used for a wide range of materials from steel to stainless steel with high -precision touri...
Rinos Co., Ltd.
MEGA Dreamleemer H7 M2263 3XφD internal refueling
■ Characteristics ・ H7 accuracy is used for a wide range of materials from steel to stainless steel with high -precision touri...
Rinos Co., Ltd.
MEGA Drillleymer H7 M2265 5XφD internal refueling
■ Characteristics ・ H7 accuracy is used for a wide range of materials from steel to stainless steel with high -precision touri...
Rinos Co., Ltd.
MEGA Drillowmer H7 M2268 8xφD internal refueling
■ Characteristics ・ H7 accuracy is used for a wide range of materials from steel to stainless steel with high -precision touri...
Rinos Co., Ltd.
MEGA Drillowmer HARD M2273 3XφD for external refueling high -hardness material processing
■ Characteristics ・ Use of high -precision touring and water -soluble cutting oil, H7 accuracy is one shot for burning steel. ...
Rinos Co., Ltd.
MEGA Dreamleemer HARD M2283 3XφD For internal refueling high -hardness material processing
■ Characteristics ・ Use of high -precision touring and water -soluble cutting oil, H7 accuracy is used for baking steel. ・ ME...
Rinos Co., Ltd.
MEGA Dreamleemer HARD M2285 5XφD For internal refueling high -hardness material processing
■ Characteristics ・ Use of high -precision touring and water -soluble cutting oil, H7 accuracy is used for baking steel. ・ ME...
Rinos Co., Ltd.
MEGA Hard Drill M1600 Carbide Solid Drill 4Xφd external refueling
■ Characteristics ・ It is a carbide solid drill for high -hard material processing. ・ It can also be used to position the cen...
Rinos Co., Ltd.
MEGA Deep Drill M2115 15XφD internal refueling
■ Characteristics ・ High accuracy and high efficiency processing can be performed for a wide range of materials from steel to ...
Rinos Co., Ltd.
MEGA Deep Drill M2120 20XφD internal refueling
■ Characteristics ・ High accuracy and high efficiency processing can be performed for a wide range of materials from steel to ...
Rinos Co., Ltd.
MEGA Deep Drill M2125 25xφD internal refueling
■ Characteristics ・ High accuracy and high efficiency processing can be performed for a wide range of materials from steel to ...
Rinos Co., Ltd.
MEGA Deep Drill M2130 30xφD internal refueling
■ Characteristics ・ High accuracy and high efficiency processing can be performed for a wide range of materials from steel to ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Modular type A type hole diameter φ1.45 ~ 1.77mm
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Modular Type B type hole diameter φ1.78 ~ 1.98mm
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Modular Type C type hole diameter φ1.99 ~ 2.36mm
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Modular Type D Type Hole Diameter φ2.37 ~ 3.16mm
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Modular Type E Type Hole Diameter φ3.17 ~ 3.95mm
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Modular Type F type Hole diameter φ3.96 ~ 4.74mm
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Modular Type G Type G hole diameter φ4.75 ~ 6.53mm
■ Characteristics ・ This is a tool that removes the back and surface of the penetration hole from φ1.45 to φ6.53. ・ There is ...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Auto Lock Type H hole diameter φ6.43 ~ 8.25mm
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling tool Auto lock type J type hole diameter φ8.26 ~ 10.26mm
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Auto Lock Type J type hole diameter φ10.27 ~ 15.79mm
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Auto Lock Type J type hole diameter φ15.8 ~ 18.97mm
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Auto lock type JW type hole diameter φ18.98 ~ 26.0mm 2 blade for 26.0mm
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no...
Rinos Co., Ltd.
Bali removal tool Michigan Deviling Tool Auto lock type MDT-401 Auto lock type blade adjustment screw
■ Characteristics ・ It is a tool that removes the back and surface of the penetrating hole from φ6.43 to φ26.0. ・ There is no...
Rinos Co., Ltd.
Counter sink 90 ° carbide 3 blades 19490-0
■ Features of WEBA carbide counter sink ・ Weba's unique cut -blade design gives a beautiful finish without chattering. ・ Scre...
Rinos Co., Ltd.
Counter sink 90 ° baked steel / difficult cutting material processing 19190-0
This is a carbide cutter developed exclusively for difficult cutting materials such as baked steel (~ 60HRC), inconel, hartery,...
Rinos Co., Ltd.
Counter sink 90 ° Carbide blade MT Shan 19290-0
■ Characteristics ・ 3 -blade 90 ° Carbide blade type chamfered cutter. ・ The plate seat processing is possible at the same ti...
Rinos Co., Ltd.
Counter sink 90 ° Carbide blades MT Shang-shank baked steel / difficult cutting material processing 19390-0
A super -hard blade -type chamfered cutter developed exclusively for difficult cutting materials such as baked steel (~ 60HRC),...
Rinos Co., Ltd.
Counter sink 90 ° Tialn coating HSS-CO internal refueling C19090-2
■ Characteristics ・ It is an internal refueling type of HSS-CO 3 blades that were not before. ・ At the time of mechanical pro...
Rinos Co., Ltd.
Counter sink 90 ° HSS-CO internal refueling C19090-0
■ Characteristics ・ No.c19090-2 It is a non-coat specification of the type. ・ Ideal for soft materials such as aluminum from ...
Rinos Co., Ltd.
Counter sink 90 ° HSS-CO heat-resistant alloy / difficult cutting material 21721-0
It is a chamfered cutter developed exclusively for difficult cutting materials for tonal quality steel (~ 45HRC), manganese ste...
Rinos Co., Ltd.
Counter sink 90 ° MT Shan HSS-CO 21751-0-MT
No.21721-0 type MT shank.
Rinos Co., Ltd.
Counter sink No.1 6 -piece set 90 °
No.19090-0 Non-coat 90 ° type 6 set set.
Rinos Co., Ltd.
Counter sink No.2 6 pcs set 90 ° TIN coating
No.19090-1 This is a set of 6 pairs of 90 ° type TIN coat.
Rinos Co., Ltd.
Counter sink No.3 6 -piece set 90 ° Tialn coating
No.19090-2 Tialn coat 90 ° type 6 set set.
Rinos Co., Ltd.
Counter sink No.4 6 -piece set 90 ° long shank
No.19092-0 Long Shank 90 ° type 6 set set.
Rinos Co., Ltd.
Counter sink No.5 6 -piece set 90 ° Extra Long Sunk
No.19093-0 Extra Long Shank 90 ° type 6 set set.
Rinos Co., Ltd.
Counter sink No.6 6 pcs set 90 ° long shank TIN coating
No.19092-1 TIN coat long shank 90 ° type 6 set set.
Rinos Co., Ltd.
Counter sink No.7 6 pcs set 90 ° Extra Long Sunk TIN coating
No.19093-1 Tin Coat Extra Long Shank 90 ° type 6 set set.
Rinos Co., Ltd.
Counter sink 90 ° Tialn coating 19090-2
■ Characteristics ・ Ideal for materials such as SUS304, SKD11, NAK. ・ The shank part of φ11.5 or more is made of three -sided...
Rinos Co., Ltd.
Counter sink 90 ° TIN coating 19090-1
■ Characteristics ・ Ideal for all steel materials such as SS400, S45C, SCM. ・ The shank part of φ11.5 or more is made of thre...
Rinos Co., Ltd.
Counter sink 90 ° 19090-0
■ Characteristics ・ Ideal for aluminum, resin, etc. from all steel materials. ・ The shank part of φ11.5 or more is made of th...
Rinos Co., Ltd.
Counter sink 90 ° 19094-0-H
It is suitable for brass and plate seats with brass and Nebai material because it takes more niggen amount than the 19090-0 typ...
Rinos Co., Ltd.
Counter sink 90 ° MT shank 19090-0-MT
■ Characteristics ・ Ideal for aluminum, resin, etc. from all steel processing. ・ It is possible to remove precise holes witho...
Rinos Co., Ltd.
Counter sink 90 ° MT shank TIN coating 19090-1-MT
No.19090-0-MT type TIN coating specification. * There are other part numbers.
Rinos Co., Ltd.
Counter sink 90 ° MT shank 19094-0-HMT
No.19090-0-MT type, so it is suitable for plate sessions such as brass and Nebai materials because it takes more niggen.
Rinos Co., Ltd.
Counter Sink 90 ° Super Extra Long Shank 19093SXL-0
■ Characteristics ・ It is a super extractorong shank type with a 3 -blade 90 °. ・ Prevents interference with jigs and work. ...
Rinos Co., Ltd.
Counter sink 90 ° Extra Long Shank 19093-0
■ Characteristics ・ It is an extra shank type with a 3 -blade 90 ° 90 °. ・ Prevents interference with jigs and work.
Rinos Co., Ltd.
Counter sink 90 ° TIN coating Extra Long Shank 19093-1
No.19093-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° long shank 19092-0
■ Characteristics ・ It is a long shank type with a 3 -blade 90 °. ・ Prevents interference with jigs and work. * There are ot...
Rinos Co., Ltd.
Counter sink 90 ° TIN coating long shank 19092-1
No.19092-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° 1 sheet 21711-0
■ Characteristics ・ 90 ° type of one blade. ・ It is possible to chameal a wide range of holes from the tip to the maximum dia...
Rinos Co., Ltd.
Counter sink 90 ° 1 blade TIN coating 21711-1
No.21711-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° 1 blade MT Shank 21711-0-MT
No.21711-0 type MT shank.
Rinos Co., Ltd.
Counter sink 90 ° 1 blade MT shank TIN coating 21711-1-MT
No.21711-0-MT type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° 1 blade long shank 21792-0
No.21711-0-MT type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° holes 21911-0
■ Characteristics ・ It is a 90 ° type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
Counter sink 90 ° Hole TIN coating 21911-1
No.21911-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° Hole MT Shank 21911-0-MT
■ Characteristics ・ It is a 90 ° MT type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
Counter sink 90 ° Hole MT Shan tin coating 21911-1-MT
No.21911-0-MT type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° Hole Long Shank 21912-0
It is a long shank type with 90 ° holes.
Rinos Co., Ltd.
Counter sink 90 ° Hole TIN coating long shank 21912-1
No.21912-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° Hole Extra Long Shank 21913-0
It is an extra shank type with 90 ° holes.
Rinos Co., Ltd.
Counter Sink 90 ° Hole TIN Coating Extra Long Shank 21913-1
No.21913-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 30 ° 19030-0
It is a 30 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 30 ° TIN coating 19030-1
No.19030-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 40 ° 19040-0
It is a 40 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 40 ° TIN coating 19040-1
No.19040-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 45 ° 19045-0
45 ° type of 3 blades
Rinos Co., Ltd.
Counter sink 45 ° TIN coating 19045-1
No.19045-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 60 ° carbide 3 blades 19460-0
■ Characteristics ・ Weba's unique three -blade design will give you a beautiful finish without chattering, and at the same tim...
Rinos Co., Ltd.
Counter sink 60 ° Carbide blade MT Shan 19260-0
■ Characteristics ・ 3 -blade 60 ° carbide blade type chamfered cutter. ・ You can get a beautiful finish without chattering.
Rinos Co., Ltd.
Counter sink 60 ° 19060-0
It is a 60 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 60 ° TIN coating 19060-1
No.19060-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 60 ° MT shank 19060-0-MT
No.19060-0 type MT shank.
Rinos Co., Ltd.
Counter sink 60 ° MT shank 19060-1-MT
No.19060-0 type TIN coating specification
Rinos Co., Ltd.
Counter sink 60 ° Extra Long Shank 19063-0
■ Characteristics ・ It is an extra shank type with a 3 -blade 60 °. ・ Prevents interference with jigs and work.
Rinos Co., Ltd.
Counter sink 60 ° TIN coating Extra long shank 19063-0
No.19063-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 60 ° 1 sheet 21611-0
■ Characteristics ・ It is a 60 ° type of one blade. ・ It is possible to chameal a wide range of holes from the tip to the max...
Rinos Co., Ltd.
Counter sink 60 ° 1 blade TIN coating 21611-1
No.21611-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 60 ° 1 blade MT Shan 21611-0-MT
No.21611-0 type MT shank.
Rinos Co., Ltd.
Counter sink 60 ° 1 blade MT shank TIN coating 21611-1-MT
No.21611-0-MT type TIN coating specification.
Rinos Co., Ltd.
Counter sink 60 ° holes 21811-0
■ Characteristics ・ It is a 60 ° type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
Counter sink 60 ° Hole TIN coating 21811-1
No.21811-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 60 ° Hole MT Shank 21811-0-MT
No.21811-0 type MT shank.
Rinos Co., Ltd.
Counter sink 60 ° Hole MT Shan TIN coating 21811-1-MT
No.21811-0-MT type TIN coating specification.
Rinos Co., Ltd.
Counter sink 75 ° 19075-0
It is a 75 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 75 ° TIN coating 19075-1
No.19075-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 75 ° MT shank 19075-0
No.19075-0 type MT shank.
Rinos Co., Ltd.
Counter sink 75 ° MT shank TIN coating 19075-1
No.19075-0-MT type TIN coating specification.
Rinos Co., Ltd.
Counter sink 80 ° 19080-0
80 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 80 ° TIN coating 19080-1
No.19080-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 82 ° 19082-0
It is a 82 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 82 ° TIN coating 19082-1
No.19082-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 100 ° 19100-0
It is a 100 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 100 ° TIN coating 19100-1
No.19100-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 120 ° 19120-0
It is a 120 ° type of 3 blades.
Rinos Co., Ltd.
Counter sink 120 ° TIN coating 19120-1
No.19120-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 120 ° MT Shan 19120-0-MT
No.19120-0 type MT shank.
Rinos Co., Ltd.
Counter sink 120 ° MT Shan 19120-1-MT
No.19120-0-MT type TIN coating specification.
Rinos Co., Ltd.
Counter sink 120 ° holes 21120-0
■ Characteristics ・ It is a 120 ° type with a hole. ・ Especially, beautiful surfaces are possible to all soft materials.
Rinos Co., Ltd.
Counter sink 120 ° Hole TIN coating 21120-1
No.21120-0 type TIN coating specification.
Rinos Co., Ltd.
Counter sink 90 ° pipe inner / outer surface cutter P19090-0
■ Characteristics ・ It is a cutter that can face the inside and outer surface of the pipe end surface simultaneously. ・ You c...
Rinos Co., Ltd.
Counter sink 90 ° MT Shank P19090-0-MT
No.P19090-0 type MT shank.
Rinos Co., Ltd.
Unbalanced Type Carbide Bleeding Cutter TiALN Coating RBS-Micro
■ Characteristics ・ Cap screws M3 to M6 can be processed. ・ The discharge of the chips is good, and stable backing is possibl...
Rinos Co., Ltd.
Unbalanced type backlower cutter chip replacement type RBS
■ Characteristics ・ Listing processing from φ15 to φ76 is possible. ・ The discharge of chips is good and stable lining is pos...
Rinos Co., Ltd.
Anciordinum type backlower cutter chip replacement insert
・ When ordering, please specify an insert material species. ・ Quantity: 10 pieces per case ・ Order example: MCEX060204FRH-AK...
Rinos Co., Ltd.
Unbalanced type back -handed cutter chip replacement RFS
■ Characteristics ・ The back of the hole is possible. ・ It is powerful for a wide range of materials, from general steel to c...
Rinos Co., Ltd.
Ease of heart type back side -by -side cutter chip replacement insert
・ When ordering, please specify an insert material species. ・ Quantity: 10 pieces per case ・ Order example: When processing ...
Rinos Co., Ltd.
Lass seating cutter mass production processing autofacer AFA
The automatic locking mechanism in the flywheel functions by rotating and reverse rotation and opening and closing the tip of t...
Rinos Co., Ltd.
Listing Cutter General -purpose type HSS Cutter TU
■ Characteristics ・ Listing processing from φ15 to φ76 is possible. ・ The discharge of chips is good and stable lining is pos...
Rinos Co., Ltd.
Listing Cutter Cutter General -purpose type straight shank holder (cutter diameter ~ φ20) tuh
■ Characteristics ・ It is very easy to install and remove the cutter part with a unique bion lock mechanism. ・ Because the cu...
Rinos Co., Ltd.
Listing Cutter Cutter General -purpose type straight shank holder (cutter diameter φ21 ~) TUHW
■ Characteristics ・ It is very easy to install and remove the cutter part with a unique bion lock mechanism. ・ Because the cu...
Rinos Co., Ltd.
Adjusted sleeve for general -purpose type for backloading (TUHW holder type A) TUB
By using for TUHW holder type A, it corresponds to a wide range of sizes. * There are other part numbers.
Rinos Co., Ltd.
Listing Cutter General-purpose type MT Shang Holder TUH-MT
■ Characteristics ・ It is very easy to install and remove the cutter part with a unique bion lock mechanism. ・ Because the cu...
Rinos Co., Ltd.
Taper shank drill for high -hardness material Hardox material, Weldox material KT832
■ Characteristics ・ The core is thickened to increase the torsion rigidity. ・ Especially designed to withstand the holes proc...
Rinos Co., Ltd.
4 -blade carbide end mill 4 -blade cut titanium cut KT7487
■ Characteristics ・ Pure titanium / titanium alloy ・ It is an end mill with radius for difficult cuttings up to 30 to 45 HRC....
Rinos Co., Ltd.
4 -blade carbide end mill 4 -blade titanium cut finish KT7607
It is for finishing 40 ° screw finishing.
Rinos Co., Ltd.
4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 35 ~ 38 ° short type KT7707
■ Characteristics ・ Dry cutting is possible by adopting a unique inequality and alunit-s coat, and a quiet and stable processi...
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 -blade speed cut 35 ~ 38 ° Regular type KT7717
It is a regular type of KT7707.
Rinos Co., Ltd.
4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 39 ~ 42 ° Stainless steel / difficult cutting material processing KT7747
It is exclusively for stainless steel and difficult cutting materials of the speed cut series.
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 blade speed cut 35 ~ 38 ° Oil hole KT8507
■ Characteristics ・ Speed -cut's unique inequality and Twindur coat achieves quiet and stable processing accuracy even in th...
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 blade speed cut 39 ~ 42 ° Oil hole KT8557
■ Characteristics ・ Speed -cut's unique inequality and Ultradur coat achieves a quiet and stable processing accuracy even in...
Rinos Co., Ltd.
4 -piece blade failure / Inequal lead carbide end mill 4 -blade speed cut 35 ~ 38 ° short type KT8207
■ Characteristics ・ Speed -cut's unique inequality and Twindur coat achieves quiet and stable processing accuracy even in th...
Rinos Co., Ltd.
4 -piece blade failure / inequality carbide end mill 4 blade speed with cut neck 35 ~ 38 ° Stub type KT7627
■ Characteristics ・ Speed-cut's unique inequality and Alunit-S coat achieves quiet and stable processing accuracy even in the ...
Rinos Co., Ltd.
Carbide Rafing End Mill 3 Blade ALUNIT Coating KT7097
■ Characteristics ・ A well -balanced 3 -piece blade shape and alUNIT coat can be processed to a wide range of ingredients. ・ ...
Rinos Co., Ltd.
Carbide rafing end mill 4 blades ALUNIT coating KT7697
■ Characteristics ・ Make Stag's unique 4 -blade -shaped and high -performance alUNIT coat will show outstanding performance. ...
Rinos Co., Ltd.
Carbide Ruffing End Mill Fine Pitch 30 ° Twist KT7027
■ Characteristics ・ Make Stag's unique fine pitch blade and high -performance alUNIT coat will show outstanding performance. ...
Rinos Co., Ltd.
Carbide Ruffing End Mill Fine Pitch 20 ° twist short type KT7047
■ Characteristics -Meike Stag's unique feature-knitting and high-performance Alunit-S coat will show outstanding performance. ...
Rinos Co., Ltd.
Aluminum processing end millefine pitch 45 ° twist short type KT7087
■ Characteristics ・ The combination of 45 ° twist and high-performance AlUnit-S coat is powerful in rough processing on stainl...
Rinos Co., Ltd.
End mill for aluminum processing aluminum finishing processing pin angle short 44
■ Characteristics ・ It is an end -mill for 40 ° twisting with good sharp aluminum and non -ferrous metal material. ・ It is po...
Rinos Co., Ltd.
End mill for aluminum processing aluminum finishing pin angle long 44A
It is a long type of No.44. * There are other part numbers.
Rinos Co., Ltd.
Aluminum processing End Mill Make Stag Aluminum Ruffing Short A51
It is a three -blade raffing end mill specially designed for aluminum, so it is also cut in vertical. * There are other part n...
Rinos Co., Ltd.
Raffing long A51A for aluminum processing for aluminum
It is a long type of No.a51. * There are other part numbers.
Rinos Co., Ltd.
Raffing End Mill Short ALUNIT Coating TAL51NR
■ Characteristics ・ The combination of a unique highissing material that has both hardness and a flip, and the combination of ...
Rinos Co., Ltd.
Raffing End Mill Short TICN Coating TC51NR
■ Characteristics ・ TICN coating is applied to standard type raffing and long life. ・ For side cutting. * There are other pa...
Rinos Co., Ltd.
Raffing End Mill Short TIN Coating T51
Since TIN coating is applied to a unique highissing material with excellent vibration resistance and excellent wear resistance ...
Rinos Co., Ltd.
Raffing End Mill Long TIN Coating T51A
■ Characteristics ・ It is a long type of No.T51. ・ Especially suitable for side cutting. * There are other part numbers.
Rinos Co., Ltd.
Raffing End Mill Short 51
It is a long life, with a unique highs material with excellent vibration resistance and wear resistance and a good raffing blad...
Rinos Co., Ltd.
Raffing End Mill Long 51A
■ Characteristics ・ No.51 long type. ・ Suitable for side cutting. * There are other part numbers.
Rinos Co., Ltd.
Raffing End Mill Super Long TIN Coating T51 SL
It is a super long type of No.T51.
Rinos Co., Ltd.
Raffing End Mill Super Long 51SL
No.51 super long type.
Rinos Co., Ltd.
Raffing Ball End Mill Short TIN Coating T67
■ Characteristics ・ Make Stag has a long life because a TIN coat is applied to the unique rafing ball blade. ・ Used for rough...
Rinos Co., Ltd.
Raffing Ball End Mill Short 67
Used for rough shaving such as molds. * There are other part numbers.
Rinos Co., Ltd.
Raffing Ball End Mill Long TIN Coating T67A
■ Characteristics ・ It is a long type of No.T67. ・ Used for rough shaving such as molds.
Rinos Co., Ltd.
Raffing Ball End Mill Long 67A
It is a long type of No.67. * There are other part numbers.
Rinos Co., Ltd.
Raffing Ball End Mill Super Long TIN Coating T67SL
It is a long type of No.T67.
Rinos Co., Ltd.
Raffing Ball End Mill Super Long 67SL
It is a long type of No.67.
Rinos Co., Ltd.
Fine pitch end mill powdered powder highs short AlUNIT coating HPTT2017
■ Characteristics ・ This is the highest end mill that demonstrates the performance equivalent to a carbide non -coat by combin...
Rinos Co., Ltd.
Fine pitch End Mill Short ALUNIT Coating TAL51HR
■ Characteristics ・ It is the most popular end mill among Make Stag. It is suitable for a wide range of materials, from genera...
Rinos Co., Ltd.
Fine pitch end mill short TICN coating TC51HR
■ Characteristics ・ The adoption of TICN coat is powerful for a wide range of materials, from general steel to stainless steel...
Rinos Co., Ltd.
Fine pitch end mill short TIN coating T51HR
■ Characteristics ・ By adopting TIN coat, it is powerful to a wide range of materials, from general steel to hard -to -cut sta...
Rinos Co., Ltd.
Fine pitch end mill short 51HR
■ Characteristics ・ It is powerful to the materials up to alloy steel, tool steel, and high -quality steel (~ 42HRC). ・ It is...
Rinos Co., Ltd.
Fine pitch End Mill Long Alunit Coating TAL51AHR
■ Characteristics ・ It is a long type of No.TAL51HR. ・ Especially suitable for side cutting. * There are other part numbers.
Rinos Co., Ltd.
Fine pitch end mill long TICN coating TC51ahr
■ Characteristics ・ It is a long type of No.TC51HR. ・ Especially suitable for side cutting. * There are other part numbers.
Rinos Co., Ltd.
Fine pitch end mill long TIN coating T51ahr
■ Characteristics ・ It is a long type of No.T51HR. ・ Especially suitable for side cutting. * There are other part numbers.
Rinos Co., Ltd.
Fine pitch end mill long 51ahr
■ Characteristics ・ It is a long type of No.51HR. ・ Especially suitable for side cutting. * There are other part numbers.
Rinos Co., Ltd.
End millsten cut short for medium finishing ALUNIT coating HPT2117
■ Characteristics ・ The adoption of HSS-SPM material and Alunit coat is used for various stainless steels such as SUS304, SUS3...
Rinos Co., Ltd.
End mill short TIN coating T52 for medium finishing processing
■ Characteristics ・ This end mill with a TIN coat on a high -performance blade shape that can obtain almost flat cutting surfa...
Rinos Co., Ltd.
End mill short 52 for medium finishing processing
■ Characteristics ・ It is a high -performance rough and finish blade -shaped end mill with almost flat cutting surface under c...
Rinos Co., Ltd.
End mill long TIN coating T52A for medium finishing processing
■ Characteristics ・ It is a long type of No.T52. ・ It is a long life as well as one cut amount. * There are other part numbers.
Rinos Co., Ltd.
End mill long 52A for medium finishing processing
■ Characteristics ・ It is a long type of No.52. ・ It is a long life as well as one cut amount. * There are other part numbers.
Rinos Co., Ltd.
End mill for medium finishing 3 -blade short TIN coating T52B
■ Characteristics -A TIN coat -specification end mill with a 3 -blade raff and finish blade that is ideal for grooving. ・ Vert...
Rinos Co., Ltd.
End mill for medium finishing 3 -blade short 52B
■ Characteristics ・ End mill that adopts a 3 -blade raff and finish blade that is ideal for grooving. ・ Vertical forwarding i...
Rinos Co., Ltd.
End mill for medium finishing 3 blades long TIN coating T52BA
■ Characteristics ・ It is a long type of No.T52B. ・ It is a long life as well as one cut amount. * There are other part numb...
Rinos Co., Ltd.
End mill for medium finishing 3 pieces blade long 52BA
■ Characteristics ・ It is a long type of No.52B. ・ It is a long life as well as one cut amount. * There are other part numbers.
Rinos Co., Ltd.
Dyna End Mill Multifunctional Type Hard Hard 4 -Blade Corner Radius Dyna040
■ Characteristics ・ Multifunctional processing is possible, such as pockets, stepping on the standing wall, and step processin...
Rinos Co., Ltd.
Dyna End Mill High Rigid Type Super hard Work 4 Blade Neck Short Blade Dyna060
■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general ...
Rinos Co., Ltd.
Dyna End Mill Super hard 6 Blade Regular Blade Long Shank Dyna060R
■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general ...
Rinos Co., Ltd.
Dyna End Mill Super Hard 6 Blade Long Blade Dyna060L
■ Characteristics ・ The side step processing of high -speed (~ 65HRC) is possible from high -speed side processing of general ...
Rinos Co., Ltd.
Nako End Mill 2 Blade Carbide Ball End Mill NACRO 020B
■ Characteristics ・ Ideal for precision parts and mold processing from difficult cutting materials such as high -hardware, tit...
Rinos Co., Ltd.
Nako End Mill 3 Blade Carbide Square End Mill NACRO 030
■ Characteristics ・ It can be used for a wide range of materials, from difficult cutting materials such as high -hardware, tit...
Rinos Co., Ltd.
Nako End Mill 4 -Blade Carbide Square End Mill NACRO 040
■ Characteristics ・ It can be used for a wide range of materials, from difficult cutting materials such as high -hardware, tit...
Rinos Co., Ltd.
Nako End Mill 90 ° Carbide V Point NACRO 020v90
■ Characteristics ・ Ideal for titanium alloy and high -hardness material (~ 62 HRC) Centering processing, C -surface processin...
Rinos Co., Ltd.
Nako End Mill 60 ° Carbide V Point NACRO 020v60
■ Characteristics ・ It is ideal for processing such as titanium alloys and high -hardness materials (~ 62hrc) Various hard -sh...
Rinos Co., Ltd.
Nako End Mill 120 ° Carbide V Point NACRO 020V120
■ Characteristics ・ Ideal for titanium alloys and high -hardness materials (~ 62 HRC) Centering processing, surfacing processi...
Rinos Co., Ltd.
Long Blade Carbide End Mill 2 Blade Long Blade EN020L
The blade length is long and long -term shaving is possible. * There are other part numbers.
Rinos Co., Ltd.
Long Blade Carbide End Mill 2 Blade Extra Long Blade EN020XL
The blade length is long and long -term shaving is possible. * There are other part numbers.
Rinos Co., Ltd.
Crash Ra Fing 70 6 -piece blade Carbide Ruffing End Mill CRUSH060
■ Characteristics ・ We adopt a super -particle carbide of Germany, which has been carefully selected for high -rigid material ...
Rinos Co., Ltd.
Tap Destroyer broken HSS tap drill for removal TP400
■ Characteristics ・ Tap Destroyer is designed for processing to remove broken taps and baked bolts. ・ In addition to the brok...
Rinos Co., Ltd.
FB cutter carbide FB Bureless cutter (Forward & Backward) 900
It is possible to remove the bali on the front side and the back side of the wake with one bottle.
Rinos Co., Ltd.
FB Cutter Carbide FB Radia Scatter (Forward & Backward) 901
Precision R processing on the front and back side of the wake is possible.
Rinos Co., Ltd.
FB cutter carbide FB backcutter (backward) 904
It is possible to remove the burr and chamfer on the back of the work.
Rinos Co., Ltd.
Carbide Solid End Mill 3 -Blade End Mill
■ Characteristics ・ Balanced 3 blades 30 ﾟ Thirty twist and LB coat (TIALN system) The discharge of cutting is well -cut to st...
Rinos Co., Ltd.
Carbide Solid End Mill Left Refrigeration Diversion 3-Blade 3 Blade End Mill TIAIN Coating 105-G
■ Characteristics ・ Left -turn end mill of No.105. ・ You can get a very good surface roughness. ・ All sizes pinkad. * There...
Rinos Co., Ltd.
Carbide Solid End Mill Left-turning Diversion 3-Blade 3 Blade End Mill 105-G-N
■ Characteristics ・ No.105 is a non -pussy for left turn. ・ Good surface roughness can be obtained in materials such as alumi...
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) Carbide 90 ° 337
■ Characteristics ・ Because the tip chisel width is very small, high -precision positioning is possible. ・ Positioning and su...
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) Carbide 90 ° TIAIN coating 337-C
It is a 337 Taryn coating type. * There are other part numbers.
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) Left-turn diverted super hard hardware 90 ° 337-1
■ Characteristics ・ Left blade / left screw type. ・ Because the tip chisel width is very small, high -precision positioning i...
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) HSS-CO 90 ° 6105
Because the tip chisel width is very small, it is possible to determine a high -precision position.
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) HSS-CO 90 ° TIN coating 6105T
It is a 6105 TIN coating type.
Rinos Co., Ltd.
NC Spotting Drill (for positioning and chamfering)
■ Characteristics ・ Because the tip chisel width is very small, high -precision positioning is possible. ・ 120 ° surfacing pr...
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) Carbide 120 ° Tialn coating 337-2-C
It is a 337-2 Tialn coating type. * There are other part numbers.
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) Carbide 60 ° 337-3
■ Characteristics ・ Because the tip chisel width is very small, high -precision positioning is possible. ・ 60 ° surfacing pro...
Rinos Co., Ltd.
NC Spotting Drill (for positioning / chamfering) Carbide 60 ° Tialn coating 337-3-C
It is a 337-3 Tialn coating type. * There are other part numbers.
Rinos Co., Ltd.
Carbide solid drill center point drill 338
■ Characteristics ・ It is a dedicated drill for high -precision holes with a thin plate with good bite and centripetal. ・ Bec...
Rinos Co., Ltd.
Carbide solid drill left-turning diversion precision small diameter drill (left blade / left knot) 340-1G
■ Characteristics ・ It is a general -purpose carbide drill dedicated to left rotation that can process high precision. ・ The ...
Rinos Co., Ltd.
Carbide solid drill left-handed drill (left blade / left knot) 348-g
■ Characteristics ・ It is a general -purpose carbide drill dedicated to left rotation that can process high precision. ・ The ...
Rinos Co., Ltd.
Carbide solid drill 3 blades small diameter drill (Ruma type) 353
■ Characteristics ・ No centering and lamer is required, and high -precision hole processing is possible close to the circle. -...
Rinos Co., Ltd.
Carbide solid drill 3 blade drill 353-1
■ Characteristics ・ No centering and lamer is required, and high -precision hole processing is possible close to the circle. -...
Rinos Co., Ltd.
Carbide solid drill 3 blades long drill 353-2
It is a long type of 353-1. * There are other part numbers.
Rinos Co., Ltd.
Carbide long neck radios end mill RBRN aluminum / resin rib ditch processing end mill
■ Characteristics ・ Ideal for processing deep ribs and fine parts such as aluminum and resin. ・ Φ0.3 to φ3.0 comes with corne...
Rinos Co., Ltd.
V -type carbide solid end mill MV90 90 °
■ Characteristics ・ Centering processing, C -surface processing, hole surface processing, internal processing, V groove proces...
Rinos Co., Ltd.
V-type carbide solid end mill MV90-C 90 ° Tialn coating
■ Characteristics ・ It is a Tialn coating type of MV60.
Rinos Co., Ltd.
V -type carbide solid end mill MV60 60 °
■ Characteristics ・ It can be widely processed with one bottle, such as surfacing processing, hole surface removal, side proce...
Rinos Co., Ltd.
V-type carbide solid end mill MV60-C 60 ° Tialn coating
■ Characteristics ・ It is a Tialn coating type of MV60.
Rinos Co., Ltd.
V -type carbide solid end mill MV120 120 °
■ Characteristics ・ Centering processing, chamfer processing, hole surface processing, internal processing, V groove processin...
Rinos Co., Ltd.
V-type carbide solid end mill MV120-C 120 ° Tialn coating
■ Characteristics ・ It is a TIALN coating type of MV120.
Rinos Co., Ltd.
Carbal sculpture cutter 1352 Spiral blade sculpture cutter 10 °, 30 °, 60 °
■ Characteristics ・ For NC / MC aircraft. ・ Dice steel, stainless steel, aluminum plastic, copper, various precious metals, s...
Rinos Co., Ltd.
Carbal sculpture cutter 1354 Spiral blade sculpture cutter 90 °
■ Characteristics ・ For NC / MC aircraft. ・ Dice steel, stainless steel, aluminum plastic, copper, various precious metals, s...
Rinos Co., Ltd.
Carbal sculpture cutter 1353 half -moon blade sculpture cutter 10 ° / 60 °
■ Characteristics ・ For NC / MC aircraft. ・ Dice steel, stainless steel, aluminum plastic, copper, various precious metals, s...
Rinos Co., Ltd.
Carbal sculpture cutter 1355 half -moon blade sculpture cutter 90 °
■ Characteristics ・ For NC / MC aircraft. ・ Dice steel, stainless steel, aluminum plastic, copper, various precious metals, s...
Rinos Co., Ltd.
Diamond coating end mill 72GT corner with radius end mill
■ Characteristics ・ End mill for graphite processing. ・ It is also possible to process aluminum and copper alloy by using wat...
Rinos Co., Ltd.
Diamond coating end mill 72GR ball end mill
■ Characteristics ・ End mill for graphite processing. ・ It is also possible to process aluminum and copper alloy by using wat...
Rinos Co., Ltd.
Carbide solid drill SD160
■ Characteristics ・ It is a general -purpose carbide solid drill. ・ Correction to the step shape is also possible at the shor...
Rinos Co., Ltd.
Multi -end mill 66m multi -end mill for glass materials, composite materials, non -ferrous metal materials
■ Characteristics ・ Ideal for processing glass materials. ・ Various composite materials, cast iron, aluminum alloy, etc. can ...
Rinos Co., Ltd.
Multi -end mill 66mr multi -ball end mill for glass materials, composite materials, non -ferrous metal materials
■ Characteristics ・ Ideal for processing glass materials. ・ Various composite materials, cast iron, aluminum alloy, etc. can ...
Rinos Co., Ltd.
CFRP Glass Fiber Carbide End Mill 106 No bottom blade for fiber
■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.
Rinos Co., Ltd.
Carbide end mill for CFRP Glass fiber processing 107 with bottom blade for fiber
■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.
Rinos Co., Ltd.
CFRP Glass Fiber Processing Carbide End Mill 108 Fiber End Mill
■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.
Rinos Co., Ltd.
CFRP Glass Fiber Processing Carbide End Mill 109 Fiber Drill 135 °
■ Characteristics ・ Ideal for processing composite materials and glass fiber. * There are other part numbers.
Rinos Co., Ltd.
Carbide end mill BF butterfly end mill for aluminum, light alloy, plastic processing
■ Characteristics ・ It is a blade shape that can avoid the chatter of the processed product and make a very stable cutting. ・...
Rinos Co., Ltd.
Carbide end mill for aluminum, light alloy, plastic processing 104 2 -blade End mill Right blade left twist
■ Characteristics ・ Ideal for processing aluminum and plastic.
Rinos Co., Ltd.
Carbide end mill for aluminum, light alloy, plastic processing 105 3 sheets End mill Right blade left twist
■ Characteristics ・ Ideal for processing aluminum and plastic.
Rinos Co., Ltd.
Carbide end mill for aluminum, light alloy, plastic 110 1 -blade End mill Right blade.
■ Characteristics ・ Ideal for processing aluminum and plastic. * There are other part numbers.
Rinos Co., Ltd.
Carbide end mill for aluminum, light alloy, plastic 111 1 -blade End mill Right blade left twist
■ Characteristics ・ Ideal for processing aluminum and plastic. * There are other part numbers.
Rinos Co., Ltd.
Jet Drill JET75 Super hard blade for high hardness and difficult cutting materials
■ Characteristics ・ It is a carbide drill for a carbide blade type (up to 70HRC). ・ Special carbide chips with 118 ° tip ends...
Rinos Co., Ltd.
Jet Drill JET75-MT Carbide Blade High Hard Hard Hard Hard Tap Shank
■ Characteristics ・ JET-75 tapshaunk type. ・ Please use on a milling board, radialboard board, etc. * There are other part n...
Rinos Co., Ltd.
Stainless steel drill 125 HSS-CO for stainless steel / difficult cutting material
■ Characteristics -The chiselpoint unique to the free -beck is excellent in centrality and has an outstanding sharpness. ・ Esp...
Rinos Co., Ltd.
Carbide Bae Lescutter, Carbide Back Cutter -FB900 Carbide Bureless Cutter (Forward & Backward)
■ Characteristics ・ It is possible to remove the bali on the front side and the back side of the wake with one bottle.
Rinos Co., Ltd.
Carbide Bae Lescutter, Carbide Back Cutter -BC904 Carbide Backcutter (Backware)
■ Characteristics ・ Bali and chamfered on the back of the work are possible.
Rinos Co., Ltd.
Carbide blade drill SD end mill shain
■ Characteristics ・ The edge of the blade adopts a carbide blade (K20) type, so it is economical, long life and high efficienc...
Rinos Co., Ltd.
Shank for carbide blade drill ND drill chuck (3 claws)
■ Characteristics -The blade tip can be used by carbide blades (K20) and nostalgic body, and can be economically long -life and...
Rinos Co., Ltd.
Slow to Rix Drill SH-C-baked steel (~ 70HRC), hard-to-use carbide solid drill for processing material processing
■ Characteristics ・ Baked steel (~ 70HRC) Carbide drill for high -hardening steel and difficult cutting material processing. ...
Rinos Co., Ltd.
Rapido Carbide End Mill 162 2 -blade
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Carbide End Mill 164 4 -blade
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Carbide End Mill 161 3 -blade hard -cutting material processing
■ Characteristics ・ Especially, it is effective for difficult materials such as various stainless steel, titanium, inconel, co...
Rinos Co., Ltd.
Rapido carbide end mill 169 6 -blade hard -cutting material processing
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Corner Radius Carbide End Mill 166 2 -blade
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Corner Radius Carbide End Mill 168 4 Blade
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Carbide Ball End Mill 172-LF 2 sheets long blades
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Carbide Ball End Mill 172-SF 2 sheets short blades
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Carbide Ball End Mill 174-LF 2 sheets short blades
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Rapido Carbide Ball End Mill 174-SF 4 Short Blade
■ Characteristics -It can be used widely from raw material to high rigidity, raw material, toned steel, baked steel (~ 65HRC), ...
Rinos Co., Ltd.
Subland drill NSS HSS for screw holes
■ Characteristics ・ Tap screw hole and chamfering can be performed in one process. ・ Redillization is easy and can be used ec...
Rinos Co., Ltd.
Subland drill NST HSS Taephaunk for the lower screw hole
■ Characteristics ・ It is a NSS type tapshaunk. ・ All size homo processing (black) * There are other part numbers.
Rinos Co., Ltd.
Subland drill RAS HSS For bolt with hexagonal hole
■ Characteristics ・ You can sitting in one process at the same time as drilling a hexagonal hole bolt. ・ Redillization is eas...
Rinos Co., Ltd.
Subland drill RAT HSS with hexagonal hole taper shank for bolts
■ Characteristics ・ RAS type tapsha see. ・ All size homo processing (black)
Rinos Co., Ltd.
Subland drill SKS HSS dish for small screws
■ Characteristics -Moamed, drilling, plate fir, drilling, two -tier hole can be processed in one process. ・ Redillization is e...
Rinos Co., Ltd.
Adjustable Rima AJR012011 HSS Adjustable Leema
■ Characteristics ・ It is a replacement blade type (HSS) rama that can easily adjust the blade dimensions. * There are other ...
Rinos Co., Ltd.
Adjustable Rima AJR012013 HSS replacement blades for adjustable rima
■ Characteristics ・ It is a dedicated replacement blade of adjustable rima. * There are other part numbers.
Rinos Co., Ltd.
Adjustable Rima AJR012014 Adjustable Reema Nut
■ Characteristics ・ It is a dedicated nut for adjustable rima. (1 unit) * There are other part numbers.
Rinos Co., Ltd.
MEGA Sonic Rima MSR01 Sarmet Lima
■ Characteristics ・ Beck's unique structure and each blade with a different land width for each blade. -The material is a seri...
Rinos Co., Ltd.
MEGA Sonic Rima MSR01C Carbide Rima
■ Characteristics ・ Beck's unique structure and each blade with a different land width for each blade. -The material is a seri...
Rinos Co., Ltd.
Bureless Lima DBRS HSS Cross Hole Bali removal tool short type
■ Characteristics ・ It is possible to remove a wide range of materials, from soft materials such as copper, aluminum, and soft...
Rinos Co., Ltd.
Bureless Lima DBRL HSS Cross Hole Bali removal tool Long type
■ Characteristics ・ It is possible to remove a wide range of materials, from soft materials such as copper, aluminum, and soft...
Rinos Co., Ltd.
Qualter Hoses Hilt Line 1/8 "Hoosstation 0 (zero)
* There are other part numbers.
Rinos Co., Ltd.
Qualtrand Hoses 1/4 "Hodo Sustaine
* There are other part numbers.
Rinos Co., Ltd.
Qualtrand Hoses 1/2 "Hodo Seeds System
* There are other part numbers.
Rinos Co., Ltd.
LED Hall Checker FLL-M15 Light Headset
■ Characteristics ・ This is an auxiliary tool for checking the finish and surface of the process of the processing hole, the s...
Rinos Co., Ltd.
LED Hall Checker Head Head Single
■ Characteristics ・ Since the optical fiber elementary wire is used instead of a bulb that is easily damaged, the inside side ...
Rinos Co., Ltd.
LED Hall Checker LED Light Light Single
■ Characteristics ・ When the head is removed, it can also be used as a portable LED light of 100 lumen with a function of 3 st...
Rinos Co., Ltd.
Keyless Drill Chuck JT Keyless Drill Chuck
■ Characteristics -The swing accuracy is 50 μm or less, and high -precision processing is possible. ・ Realizes unpleasant dura...
Rinos Co., Ltd.
Keyless Drill Chuck BT Keyless Drill Chuck
■ Characteristics ・ Swing accuracy is 50 μm or less (30 μm average). ・ The protruding length is short and high rigidity, and ...
Rinos Co., Ltd.
Keyless Drill Chuck MT MT Shan integrated Keyless Drill Chuck
■ Characteristics -The swing accuracy is 50 μm or less, and high -precision processing is possible. ・ Realizes unpleasant dura...
Rinos Co., Ltd.
Keyless Drill Chuck STS STS ST STS ST STS ST ST ST ST ST ST ST ST ST STS ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST STS ST ST STS ST ST STSCA. ’For all
■ Characteristics ・ Swing accuracy is 50 μm or less (30 μm average). ・ The protruding length is short and high rigidity, and ...
Rinos Co., Ltd.
Centing bar SGZ-10 Centering bar TIN coating
■ Characteristics ・ It is possible to work easily with a single touch of a milling board, MC, etc. with one touch. ・ Measurem...