217 Controller Manufacturers in 2024
This section provides an overview for controllers as well as their applications and principles. Also, please take a look at the list of 217 controller manufacturers and their company rankings. Here are the top-ranked controller companies as of December, 2024: 1.Hach Company, 2.Kooltronic, Inc., 3.Russells Technical Products..
Table of Contents
Categories Related to Controllers
Engaged in research on nitride semiconductor growth using the MBE method at Waseda University Graduate School. After graduating from graduate school in 2016, he joined a non-ferrous metal manufacturer.
Engaged in equipment maintenance and engineering work at metal smelting plants. Moved to a chemical manufacturer in 2022. Engaging in similar tasks.
What Is a Controller?
A controller is a device used to adjust a machine's output automatically.
Often sold under indicating regulators or temperature regulators, many devices marketed as controllers can also control parameters other than temperature.
Physical parameters such as temperature, humidity, pressure, and flow rate are input from sensors to indicate a value. Feedback is applied to match this with the target value you set. Most products have a display for monitoring both the current value of the parameter being adjusted and the set value.
If the display uses an analog pointer, it is termed an analog controller. If it features a 7-segment display, it is called a digital controller. Currently, digital controllers are the most common type. In analog controllers, the display may omit the current value.
Uses of Controllers
Controllers are widely used in applications ranging from industrial equipment to household appliances, as exemplified below:
- Temperature control in commercial water tanks and liquid storage tanks
- Temperature regulation in air conditioners
- Humidity management in dehumidifiers and humidifiers
- Flow regulation of carbon dioxide gas in CO2 incubators for cell culture
- Pressure control in local exhaust systems
Controllers are utilized to maintain constant parameters and may be used alongside computers to log monitored data.
Principle of Controllers
A controller consists of a sensor, a processing/monitoring part, and an output section. The sensor inputs physical quantities such as temperature (using a thermometer) or humidity (using a hygrometer), among others.
The processing and monitoring section adjusts the output while monitoring the value. A built-in comparator or similar device compares the measured value to the target value to determine the output, which is then sent to the output section. Various feedback control methods are employed.
1. ON/OFF Operation
Output is activated when the measured value is below the target value and turned off when above. This repeated operation maintains the measured value near the target.
2. Proportional Operation (P Operation)
This operation adjusts the control output proportionally to the deviation from the target value, enabling smoother regulation than ON/OFF operation, though with relatively large fluctuations near the target. Integral operations, etc., adjust the stabilization offset slightly off the target value.
3. Integral Operation (I Operation)
Based on the time integral of the difference between the target and measured values, this operation is often used to eliminate offset appearing in proportional operation, typically in conjunction with P operation.
4. Differential Operation (D Operation)
This operation outputs based on the rate of change (derivative) of the measured value. PID operation, combining P, I, and D operations, integrates the benefits of each method.
How to Select a Controller
Controllers are selected based on mounting size, input specifications, output specifications, communication methods, and other factors.
1. Mounting Size
Consider the panel size where the controller will be mounted. Select a product that fits the available installation space, opting for smaller sizes if mounting multiple controllers in a row.
2. Input Specifications
Choose based on the controlled physical quantity's input signals and number of input points. For temperature inputs, resistance thermometers or thermocouples (PT100Ω, K, R, B types) are common, with 4-20 mA or 1-5 V inputs for other parameters.
3. Output Specifications
Output specifications match the signal transmitted to the output device. Analog control typically uses 4-20 mA or 1-5 V outputs, while ON-OFF control employs contact or transistor outputs, selected based on the output device's specifications.
4. Communication Method
For interfacing with computers, communication methods facilitate transmitting measured or output values to a computer or altering target values from a computer. Ethernet communication has become mainstream, succeeding older serial communication standards like RS422 or RS485.
List of 217 Controller Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Belgium
- Bulgaria
- Canada
- China
- Finland
- France
- Germany
- Greece
- Italy
- Japan
- Netherlands
- Poland
- Spain
- Switzerland
- United Kingdom
-
-
-
Hach Company
Controllers
Manufacturer Overview
Hach Company, a subsidiary of Danaher Corporation (DHR), is an American manufacturer established in 1933 and headquartered in Loveland, Colorado, specializing in analytical instruments and reagents for testing water quality and other liquid solutions. Hach offers a diverse range of products, including chemicals, laboratory equipment and supplies, as well as portable and digital (online) instruments. Specific instruments like spectrophotometers, turbidimeters, and colorimeters are also available. These products are used for various applications, for example in analyzing industrial water to reduce fresh water consumption and validate contaminant removal, and monitoring nutrient for long-term water health using the Real Time Control (RTC) system.
-
-
-
-
-
Novanta Photonics
Controllers
Manufacturer Overview
Novanta Photonics, founded in 1947 with headquarters in the UK, is a manufacturer of the key components of laser-based diagnostic, analytical, micromachining, and fine material processing equipment. The company's products include laser beam steering components, multi-axis scan heads, C02 lasers, solid-state lasers, and ultrafast lasers. Novanta Photonics’ products are used by medical and industrial OEMs and system architects to enable and improve laser-based processing equipment. Some examples include glass processing, laser marking, micromachining, metrology combs, and optical tweezers.
-
-
-
-
-
MicroStrain, a LORD Company
AC20F Drive Controller
Manufacturer Overview
MicroStrain is based in Williston, Vermont, and is an American manufacturer of inertial and wireless sensors originally established in 1987 before being acquired by HBK in 2019. The company produces various industrial and tactical-grade sensors, wireless sensor network devices, and data analysis software. Its products include battery powered wireless 3-axis accelerometers with a rugged and weather-proofed shell, cloud-based platforms for sensor data management or analysis, and software for wireless sensor network control purposes. The company's products are mainly used by clients in the aerospace, automation, and construction industries.
-
-
-
-
-
Silicon Laboratories
Smart Interface Controller ICs
Manufacturer Overview
Silicon Labs, established in 1996 with headquarters and production and R&D facilities in the USA, is a manufacturer of electronic devices and related equipment for the home automation, industrial automation, data center, automotive, communications, healthcare, and retail markets. The company's products include microcontrollers, RF integrated circuits, intelligent sensors, USB bridges, clocks, oscillators, isolators, PoE controllers, and modems. The company offers a cloud-based software platform integrated with Silicon Labs' hardware to allow their developers and OEMs to build advanced industrial, commercial, home, and life applications that include circuit breakers, home appliances, battery-powered tools, and smart hospital equipment.
-
-
-
-
-
Russells Technical Products.
CONTROLLERS
Manufacturer Overview
Russells Technical Products, founded in 1972 with headquarters in India, is a manufacturer of environmental test chambers and systems. The company's product line includes pre-engineered temperature and humidity chambers, thermal shock chambers, dynamometer chambers, environmental rooms, and industrial cryogenic freezers. Russells Technical's test chambers are found in various industries, including defense, automotive, aviation, renewable energy, and biotechnology. Russells Technical Products also provides custom test chamber design, engineering, and production to meet client needs.
-
-
-
-
-
Walchem
Water Treatment Controllers
Manufacturer Overview
Walchem, Iwaki America, Inc., expanded and incorporated in 2013 with headquarters in the USA, is a manufacturer of online analytical instruments and electronic metering pumps used for wastewater systems in swimming pools and spas. The company's tangible product line includes treatment controllers to monitor and regulate various aspects of water treatment processes and water treatment sensors and accessories used to detect chemicals and impurities in water bodies. It also provides cloud-based software tools and instrumentation that integrate with its products. The company offers its know-how to assist clients with customized and full-scope chemical control systems.
-
-
-
-
-
Kooltronic, Inc.
Controllers
Manufacturer Overview
Kooltronic, Inc., established in 1956 and headquartered in Pennington, New Jersey, USA, is a manufacturer of thermal management solutions for equipment and process cooling applications. It offers a range of products, including enclosure air conditioners, centrifugal and packaged blowers, and fans and fan trays. These products are used for controlling the temperature of equipment housed in electrical enclosures and rack enclosures, and are incorporated into Original Equipment Manufacturer (OEM) products. The company has been granted ISO 9001:2015 certification by DQS Inc., for its quality systems.
-
-
-
-
-
Analog Devices, Inc.
High Voltage Hot Swap Controllers
Manufacturer Overview
Incorporated in 1965, Analog Devices, Inc. designs, manufactures, tests, and markets integrated circuits (ICs), software, and subsystems that leverage analog, mixed-signal, and digital signal processing technologies. The company provides data converter products, power management and reference products for power conversion, driver monitoring, sequencing, and energy management applications in the automotive, communications, industrial, and high-end consumer markets. In addition, the company provides digital signal processing and system products for high-speed numeric calculations. It serves clients in the industrial, automotive, consumer, instrumentation, aerospace, and communications markets.
-
-
-
-
-
Agilent Technologies
Turbo Pumps & Controllers
Manufacturer Overview
Agilent Technologies, Inc. is a global supplier headquartered in Santa Clara, California, that provides instruments, software, services, and consumables for laboratories, was established in 1999 as a spin-off from Hewlett-Packard. The company serves analytical laboratories and the clinical and routine diagnostics markets with a full suite of technology platforms. These include automation, bioreagents, gas and liquid chromatography, informatics, and vacuum technologies. They provide critical tools and capabilites that help customers address some of humanity’s biggest challenges including disease detection and therapeutics, environmental health, and food safety.
-
-
-
-
-
ifm efector, inc.
Controllers for use in cabins
Manufacturer Overview
ifm efector (ifm) is a subsidiary of ifm electronic, founded in Germany in 1969. ifm has developed, manufactured and marketed sensors and controls technology to industries that include assembly and robotics, automotive, material handling, metal forming, mobile equipment, plastics, and food and beverage. Ifm produces sensors, condition monitoring equipment, image processing, safety technology, industrial communication, IO-link, systems for mobile machines, displays, software, connection technology, voltage supplies, as well as other accessories.
-
-
-
-
-
Banner Engineering Corporation
IIoT Gateways & Controllers
Manufacturer Overview
Banner Engineering Corporation, established in 1966 and headquartered in Minneapolis, Minnesota, is a manufacturer and supplier of industrial automation products. They offer an extensive range of sensors, including proximity sensors, photoelectric sensors, and limit switches, for detecting object presence, position, and speed. Additionally, Banner provides a different types of switches, such as pushbuttons, toggle switches, and rotary switches, to control electricity flow and offer system feedback. Their wide array of controls includes PLCs, HMIs, and motion controllers, enabling automation of industrial processes.
-
-
-
-
-
Watlow Electric Manufacturing Company
Controllers
Manufacturer Overview
Watlow Electric Manufacturing Co. was established in 1922 and is headquartered in St. Louis, Missouri as a manufacturer and designer of heating solutions. Their product portfolio includes electric resistive heaters, temperature sensors, temperature and power controllers, and supporting software. The industrial technology and thermal products offered by the company are crucial components in optimising thermal performance, decreasing design time, and improving the efficiency of products and applications. The company's sales offices span 16 countries, serving diverse industries like semiconductor processing, energy processes, environmental chambers, diesel emissions, and foodservice equipment, among others.
-
-
-
-
-
Digi International
sophisticated PLC-like automation control
Manufacturer Overview
Digi International Inc., founded in 1985, is an American manufacturer headquartered in Hopkins, Minnesota, specializing in Industrial Internet of Things (IIoT) technology. The company's offerings feature a range of solutions, including IoT software and services, along with IoT development kits and complementary items like cellular modems, cloud and security services, intelligent edge controllers, and radio-frequency (RF) modules. It also offers networking systems, including cellular routers and infrastructure management tools. Notably, the company’s SmartSense platform offers remote monitoring solutions for facility, food safety, pharmacy, and the supply chain. These products find applications across industries such as energy, medical, retail, smart cities, and transportation.
-
-
-
-
-
National Instruments Corp.
Industrial controllers
Manufacturer Overview
Founded in 1976 and headquartered in Austin, TX, National Instruments Corporation provides a software-centric platform and systems to engineers and scientists worldwide. NI’s software is used for automated test and measurement applications in manufacturing environment for configuring real-time testing application, sensor configuration and data logging of mixed signals, and monitoring ancillary rotating equipment. NI’s software also enables the mass coordination of connected devices, software deployments, and data communications throughout distributed systems. Recently, NI has begun to develop test systems and solutions for autonomous driving software and hardware validation.
-
-
-
-
-
Duff-Norton
Magnetek AC Motor Control Systems
Manufacturer Overview
Duff-Norton is a division of Columbus McKinnon Corp and was originally founded in 1883, now headquartered in Charlotte, North Carolina. Duff-Norton is an automation machinery manufacturer for aerospace, defense, automotive, entertainment, pharmaceutical, food processing, paper, energy, rail/road, and energy supply industries. Duff-Norton manufactures standard and customer-designed screw jacks (mechanical actuators), linear actuators (electro-mechanical actuators), modulator actuators, swivel joints, electric cylinders, rotary unions (rotating joints), acme and ball screws, nuts and rail maintenance equipment to customers globally.
-
-
-
-
-
Wine Guardian
Controllers
Manufacturer Overview
Wine Guardian, established in 1998 and headquartered in North Syracuse, New York, is a manufacturer specializing in wine cellar cooling units and temperature-controlled wine storage solutions. Its product range comprises Through-the-Wall Wine Coolers to meet various storage requirements and Humidifiers dedicated to preserving cork conditions. Additionally, the company provides Remote Interface Controllers, enabling the remote monitoring of wine cellar conditions, while its lineup of wine cellar cooling units includes ducted (self-contained), ducted split, ductless split, and through-the-wall (TTW) systems.
-
-
-
-
-
Automated Industrial Machine, Inc.
Controllers
Manufacturer Overview
AIM-Joraco., established in Smithfield, Rhode Island, in 2004 is a manufacturer of pneumatic presses, rotary indexers, and turn-key solutions in the fields of parts assembly and manufacturing. The company's product portfolio includes benchtop presses, C-frame presses, and custom-designed presses, used for precise and efficient parts assembly. Their products are used in Medical Devices and Healthcare, Consumer Goods, Industrial Machinery and Renewable Energy. The company provides Quality Assurance, Technical Support, national distribution, customized services and customer support.
-
-
-
-
-
AutoVac Industrial Vacuum & Air Systems
Controllers
Manufacturer Overview
AutoVac Industrial Vacuum & Air Systems, generally known as AutoVac, was founded in 1989 and centered in the town of Lake Tahoe, Nevada. AutoVac serves automotive, aerospace, medical, dental, and industrial manufacturing industries. AutoVac is a designer for manufacturing and production vacuum systems. AutoVac uses CAD to design systems such as factories and industrial production factoring in material cost, installation and operation labor, and electrical usage. Autovac can install or provide installation supervision, commissioning support, and new product development and prototyping.
-
-
-
-
-
Elinco International JPC, Inc.
Controllers
Manufacturer Overview
Electric Indicator Company (ELINCO) is an ISO 9001:2015 certified company founded in 1926 in Stamford, Connecticut. Founded in 1969, Japanese Products Corporation (JPC) was acquired by ELINCO in 1991. The company focuses on the design and manufacturing technology of motors, air-moving devices, and drives. Products include brushless DC motors, stepper motors, PMDC motors, AC motors, planetary gearboxes, encoders, fans, and blowers. The main markets of the company are communication, industrial automation, medical technology, office automation, security, home automation, and automotive.
-
-
-
-
-
Air Innovations, Inc.
Controllers
Manufacturer Overview
Air Innovations, Inc. established in North Syracuse, NY in 1986 is a manufacturer of environmental control and HVAC control systems. Their product portfolio includes Cleanroom Systems, HEP Air Clean Room HVAC, Wine Guardian, and Desktop Control Consoles that are used for Explosion proof HVAC, Wine Cellar Environmental Control, military HVAC, Aerospace Environmental Control, and Pharmaceutical Temperature & Humidity Control. The company also offers customer services that include technical support, training and customized services.
-
-
-
-
-
Stackmatch Flare Ignition Inc.
Controllers
Manufacturer Overview
Stackmatch Flare Ignition, Inc., established in 1979 and headquartered in Plano, Texas, is a manufacturer of flare pilots, pilot ignition systems, flame detection and controls. Some of the products that the company offers are high energy igniters, low energy igniters, solar powered igniters, thermocouple pilots, and flame scanners. These products are utilized in applications that pertain to the secure ignition and surveillance of flares, which are devices designed to combust excess or waste gases from industrial processes. The company also provides engineering support, inspection, testing, and troubleshooting services for its products.
-
-
-
-
-
Raveon Technologies Corp.
Controllers
Manufacturer Overview
Raveon Technologies Corp., established in 1985, is a manufacturer of long-range data radio modems in the Wireless Data Radio Industry, based in California, USA. The company specializes in GPS tracking radios, SCADA products, and Autonomous RTUs. Their wireless communication solutions are used in diverse industries, including mining, public safety, smart cities, and more. They are an ISO-certified company that takes efficient OTA protocols, and AES encryption very seriously. Using IoT gateways to provide flexible connections, Raveon supplies custom solutions for each of its customers.
-
-
-
-
-
Design Criteria, Inc.
Controllers
Manufacturer Overview
Design Criteria, Inc., established in 1999 by Eng. Carl Belnap is a manufacturer and supplier of power controllers, magnetics, power supplies, LED Off-Road Lights, and smart inventory management systems used by DoD prime contractors, military, and private enterprises. The company in Roy, Utah, USA has services such as Engineering Consultants & Contracting for research and development, 3D printing to make complex geometries, and IPC training that can be cleared within 5 business days or less, depending on the sections to be taught.
-
-
-
-
-
BIG SKY ENGINEERING, INC.
Controllers
Manufacturer Overview
Big Sky Engineering, Inc. was established in 1998 and is based out of Verona, Wisconsin. The company is a manufacturer of material handling equipment and systems used in the manufacturing, packaging, medical, and logistics industries. Partner companies include Autodesk, Cognex, Endoline, and Fanuc. The company has 3 product segments: engineering conveyor & conveyor systems, high-speed cap sorters, and robotic palletizing. Examples of conveyors are powered rollers, chute conveyors, and wheel conveyors. High-speed cap sorters are used in the manufacturing of PET bottles, pharmaceuticals, and personal care products. Robotic palletizing offerings include inline palletizing, mixed case palletizing, and layer palletizing.
-
-
-
-
-
Workmaster
Controllers
Manufacturer Overview
Workmaster is based in Malvern, Pennsylvania as a manufacturer of unloading equipment for hopper bottom railcars, and other powder and bulk solids handling equipment designed to help customers operate more safely and efficiently, increase the lifespan of production critical equipment, and decrease operating and maintenance costs of equipment used in heavy duty industrial situations. The company’s product lines include machinery, consumables such as oils and lubricants, and equipment such as programmable timers. Machinery offerings include pneumatic aid systems, bulk trailer trap openers, hopper car vibrators, hopper car connectors, and hopper car gate openers.
-
-
-
-
-
EARTH COMPUTER TECHNOLOGIES dba EarthLCD
Controllers
Manufacturer Overview
EARTH COMPUTER TECHNOLOGIES dba EarthLCD, established in Santa Ana, CA, in 1994, is a manufacturer of LCD equipment used in medical devices, embedded systems, airplanes, and factories worldwide. Their product portfolio includes LCD solutions for factory automation, offering displays that withstand harsh environments and ensure efficient operation in industrial settings and LCD panels, including TFT-LCDs, OLED displays, and custom-designed displays, used in, industrial automation, aviation, and more. The company provides global distribution and technical support.
-
-
-
-
-
Sugino Corp.
Controllers
Manufacturer Overview
Sugino Machine Limited., established in Japan, is a manufacturing company of precision engineering and industrial machinery for high-pressure cleaning, drilling, waterjet cutting, and more since 1936. The company offers a wide range of products and solutions for different industries, including automotive, aerospace, and electronics. Their product lineup includes high-pressure waterjet cutting systems, robotic systems, and machining centers. They continue to provide cutting-edge solutions and contribute to the advancement of industrial processes.
-
-
-
-
-
Airtrol Components, Inc.
Controllers
Manufacturer Overview
Airtrol Components, Inc was founded in 1977 and is headquartered in New Berlin, Wisconsin. The company is a manufacturer of precision miniature pneumatic components used in light-to-medium duty applications that require small, lightweight precision components. Many customers such as NASA are in the medical, dental, aerospace, and process control or automation industries. The companies key products categories include switches including Air Valves, Precision Orifices including needle valves and barbed fittings, and Regulators, Valves & Comparators which include pressure regulators and relief valves.
-
-
-
-
-
Blasdel Enterprises, Inc.
Controllers
Manufacturer Overview
Blasdel Enterprises, Inc. is a manufacturer of custom industrial ovens and heat processing equipment, established in 1982, and headquartered in Greensburg, Indiana, USA. They offer custom design and fabrication of industrial ovens including electric infrared, gas catalytic, and high-volume air ovens along with material handling equipment. These provide precise heat processing for industries such as aerospace, composites, electronics, and finishing in some applications such as thermoforming, powder coating, curing, and drying applications. Blasdel Enterprises, Inc. also provides support, from requirements and testing processes to creating designs using Auto-CAD.
-
-
-
-
-
SAE Manufacturing Specialties Corp
Controllers
Manufacturer Overview
Based in Bayville, NY, SAE Manufacturing Specialties Corp. is an ISO-certified supplier and manufacturer of industrial equipment, chemicals, components, ordinance, electronics, and systems for industries ranging from aerospace to high tech to law enforcement. Examples of product offerings include raw materials, chemicals, and lubricants for industrial purposes to finished products such as security helmets for law enforcement, and military ordnances. SAE also provides research and development as well as technical support for other companies in similar industries.
-
-
-
-
-
Maedler North America
Controllers
Manufacturer Overview
Mädler North America was founded in 2020 as the US-based subsidiary of Mädler which was founded in Berlin, Germany in 1882. Mädler specializes in manufacturing precision-made machine parts. Product lines include linear guides, bearings, bushes, bevel gears, worm wheels, castors and wheel systems, couplings, fastening elements, clutches, gear boxes, idlers, linear bearings, locking assemblies, machine mounts, elements for pneumatic machines various joints, rubber padding and dampers, splined shafts and hubs, sprockets, timing belts, spindles, adhesives, sealants, and other assorted accessories.
-
-
-
-
-
Syntec Corporation
Controllers
Manufacturer Overview
Syntec Corporation is an American manufacturer of water treatment products that was established in New Castle, Delaware in 1973. The company produces various water treatment chemicals for use in high temperature applications such as in heating systems or steam boilers, as well as chemicals for controlling fouling and microbiological growth in chillers or cooling towers. It also offers related services, including on-site water testing and analysis, as well as maintenance or repair of water treatment equipment. Syntec Corporation products are mainly used by clients in commercial real estate, healthcare, and electric utilities, as well as in chemical and food processing.
-
-
-
-
-
Hayward Flow Control
Controllers
Manufacturer Overview
Hayward Flow Control was founded in 1923 and operates out of Clemmons, North Carolina. Hayward Flow Control is a manufacturer of industrial thermoplpastic valves and process control products. Hayward Flow Control product lines include thermoplapstic valves such as ball valves and butterfly valves, Hayward Filtration & Straining line, Hayward Actuation line including actuators and actuated valves, pressure & flow control valves, corrosion resistant pumps, instrumentation, bulkhead fittings & tank accessories, end connections, and other parts and accessories.
-
-
-
-
-
ASG, Division of Jergens, Inc.
Controllers
Manufacturer Overview
ASG is a division of Jergens, Inc., was founded in 1976, and headquartered in Cleveland, Ohio. ASG both manufactures and distributes solutions for assembly including precision torque and angle DC electric fastener systems. ASG is ISO 9001:2015 certified. ASG groups include ASG Express, ASG Precision Fastening, ASG Automation, and ASG Integrated Services. Together they specialize in electric and manual screwdrivers, production aides, tool accessories, air motors, pneumatic torque control tools, pulse tools, torque wrenches, current control tool systems, automation systems, auto feed systems, air grippers, torque arms, screwdrivers & nutrunners for automation, and peripheral automation equipment.
-
-
-
-
-
Process Control Corp.
Controllers
Manufacturer Overview
Process Control Corporation was founded in 1967 and is headquartered in Atlanta, Georgia. The company is a supplier of plastics processing equipment including control automation and related equipment to manufacturers and businesses to customers around the world directly and through its German subsidiary. The company’s main product lines include gravimetric batch and continuous blenders, automatic scrap recycling machines, extrusion control and material handling systems, and powder and additive feeders. The company provides marketing, sales, manufacturing, engineering, and service support to customers for all products sold.
-
-
-
-
-
EVSCO, Inc.
Digital Modulating Controller
Manufacturer Overview
EVSCO, Inc. is an Illinois-based elliptic valve manufacturer founded in 1980. The company produces a variety of valves for manual, electric, and pneumatically-actuated systems that operate on gas or pressurized air for standard and customized flow patterns. Its valves are available in polypropylene or PVDF (polyvinylidene difluoride) thermoplastic and are shipped with standard Viton (fluoroelastomer material) seals. Further, EVSCO produces a stack valve that can be combined with other valves and utilized as a signal unit.
-
-
-
-
-
Howman Engineering
Controllers
Manufacturer Overview
Howman Engineering was established in 1987 and is headquartered in Lebanon, New Jersey. The company is a designer and manufacturer of electromechanical controls, primarily serving food service, construction, textile, and steel production industries. The company’s in-house engineering team collaborates with customers to develop custom products to meet precise and niche needs using Design for Manufacturability and Design for Testing procedures. The company’s electromechanical controls products expertise covers printed circuit boards, industrial controls, and cable assemblies.
-
-
-
-
-
American Power Systems, Inc.
Controllers
Manufacturer Overview
American Power Systems, Inc. (APS) is an American manufacturer of power conversion and distribution equipment established in 2006 and based in Davenport, Iowa. The company primarily produces mobile power system components including power generators, converters, alternators, and regulators. These are used for integration in marine, security, armored, and specialty vehicles. APS also offers related accessories such as lithium ion battery storage components and switches that increase the RPM range of idling engines. The company provides additional services to customers with niche use cases — including custom product and system design, testing, and integration.
-
-
-
-
-
INPRO Technologies, Inc.
Controllers
Manufacturer Overview
INPRO Technologies was founded in 1987 and is headquartered in Frederick, Maryland. The company is a manufacturer of automation and robotic machinery to market segments including medical devices, automotive, electronics, plastics, and coating of wood and laminate flooring. The company provides process technologies including UV curing and control, web cleaning, plasma treatment, surface cleaning, and electrostatic charging. The company’s services include system integration, consulting, diagnostics, repair, and robotics & automation integration.
-
-
-
-
-
Magnetic Lifting Technologies US, LLC
Controllers
Manufacturer Overview
Magnetic Lifting Technologies US, LLC established in New Castle, PA in 2010 is a manufacturer of industrial lifting magnets for the Scrap, Steel, Slag, Rail, and Foundry industries. The company's product portfolio includes Circular Lifting Magnets, Electro Lifting Magnets, Scrap Handling Magnets, Rail and Foundry Lifting Magnets and Slag Handling Magnets. Their products are used in industries such as Scrap Recycling, Steel Mills and Metal Processing, Transportation, Foundries and Casting. The company also offers customized services and technical support.
-
-
-
-
-
Diamond Technologies, Inc.
Controllers
Manufacturer Overview
Diamond Technologies was founded in 1997 and is based in Hudson, Massachusetts and is a custom designer and engineer for data collection automation, and industrial communications. Diamond Technologies’s automation solutions segment offers OEMs and other customers system configuration, component selection, verification of compatibility, review of power requirements, software development, and other services. Data collection includes integration of data collection equipmpent, maintained OEM delivery, pre-programmed barcode, RFID, or embedded data collection components, OEM labeling, and others.
-
-
-
-
-
Chardon Laboratories, Inc.
Controllers
Manufacturer Overview
Chardon Laboratories was founded in 1965 and is headquartered in Cincinnati, Ohio. The company is a provider of water treatment services for automotive, manufacturing, health care, plastics, and other industries across the northeastern and northern United States. Customers include Yum Brands, US Bank, Cintas, PNC, and Honda. The company’s services include cooling tower water treatment including bacterial and corrosion elimination, boiler water treatment, closed loop water treatment, and various water testing and long-term water management plans.
-
-
-
-
-
Advance Electrical & Automation
Controllers
Manufacturer Overview
Advance Electrical & Automation is a supplier and a manufacturer, a company specializing in providing electrical and automation solutions for industrial applications. Established in 2013, offering a wide range of products and services, including oil and gas, power generation, water treatment, and manufacturing. AEA's product includes electrical components such as transformers, circuit breakers, and control panels, as well as automation systems and software for process control and monitoring. One example of their product is the AEA-5000 series PLC (Programmable Logic Controller), it enables seamless integration and precise control in industrial applications, ensuring optimal performance and productivity.
-
-
-
-
-
Weldon Solutions, Inc.
Controllers
Manufacturer Overview
Weldon Solutions roots go back to the 1890s in York, Pennsylvania. The company is a manufacturer of CNC cylindrical grinder products, robotic automation systems, and technical support for manufacturing and material handling industries. The company operates in 2 segments: Industrial Automation and CNC Grinders. Industrial Automation provides robotic automation components handling system design, material removal, machine tending, and collaborative robots. It also includes the FANUC System Integrator for the integration of and service of FANUC robots and cobots. CNC Grinders include automated grinders and peel grinders, with 8 models overall.
-
-
-
-
-
Velmex
Controllers
Manufacturer Overview
Velmex, Inc. was founded in 1967 in Bloomfield, New York where it still operates today. The company is a designer and manufacturer of stock and custom linear and rotary motion control positioning equipment for scientific, research, machining, and industrial applications. The company produces 3 unique brands of manual and motor-driven assemblies in Unislide, BiSlide, and XSlide in multiple build-to-order configurations. The company also produces manual and motor-driven XY tables, rotary turntables, as well as VXM motor controls, and VRO encoder readouts.
-
-
-
-
-
Smith Systems, Inc.
Controllers
Manufacturer Overview
Smith Systems, Inc. was founded in the 1980s and is headquartered in Brevard North Carolina. The company is a manufacturer of speed sensors, motion sensors, temperature sensors, as well as instrumentation and cable harnessing devices for industries such as aerospace, military, and rail industries. The company also offers custom manufactured products, per customer demands, both for quality control purposes and for OEM qualification. Potential design configurations include capabilities unique to railroad or aerospace applications including track sensing, angle sensing, and tolerance to extreme conditions.
-
-
-
-
-
Devar, Inc.
Controllers
Manufacturer Overview
Devar Inc. is headquartered in Bridgeport, Connecticut. Devar Inc. is a designer and manufacturer of industrial control and measurement devices for several industries including electromechanical manufacturing. Devar products are made in the United States and its factories are ISO 9001:2015 certified. Devar’s product categories include level and pressure including transducers and transmitters, pump controllers, loop powered indicators, signal isolators and converters including AC current transmitters and isolated signal conditioners, panel meters, alarms, and temperature transmitters.
-
-
-
-
-
Ace Controls, Inc.
Controllers
Manufacturer Overview
Ace Controls, Inc. is an American manufacturer of automation, motion, and vibration control products established in 1963 and headquartered in Farmington Hills, Michigan. The company produces various industrial shock absorbers, gas or air springs, vibration dampers, and hydraulic feed controls. These improve the production speed, efficiency, noise, and safety of industrial facilities. Ace Controls primarily serves clients in the robotics, material handling, automotive, and packaging sectors. It also provides consultation, engineering, and fabrication services for unique customer projects.
-
-
-
-
-
Kelly Pneumatics, Inc.
Controllers
Manufacturer Overview
Kelly Pneumatics was established in 2004 and is based out of Newport Beach, California. The company is a designer and manufacturer of proportional valves, pressure regulators, and pneumatic control products for numerous industries including medical, alternative energy, test equipment, semiconductor equipment, and gas analyzers. The company’s standard products include proportional valves, pressure regulators, flow controllers, flow sensors and meters, and electronic boards. The company provides custom solutions for pneumatic valves, regulators, and control products to match customers’ needs. These include analyzing, engineering, prototyping, and testing.
-
-
-
-
-
MIS Controls Inc.
Controllers
Manufacturer Overview
MIS Controls Inc., founded in Rochester Hills, Michigan in 2014 is a manufacturer of Electrical Control Panels, Custom Enclosures, and Industrial Kiosk Control Systems. The company's product portfolio includes mechanical parts, Sub-Plate Assemblies, Battery Testing Systems, electrical wiring, and custom components. The company serves markets including Medical and Healthcare, Aerospace and Defense, Consumer Goods, Industrial Manufacturing and Construction and Building. The company has a national distribution network and a customer support center.
-
-
-
-
-
Electronic Controls Corp. (ECC), Div. of Selco Products
Controllers
Manufacturer Overview
Selco Products was founded in 1958 and is headquartered in Reno, Nevada. The ISO 9001:2008-certified company is a global manufacturer of customized electronic components. The company serves several markets including medical, HVAC, electronics, and aerospace OEMs and end-user companies, leveraging JIT delivery, Kansan, and engineering support. Electronics offerings include thermistors, temperature controls, panel instruments, and signal converters. Non-electronics include buttons, knobs, and other accessories used in digital and analog electronics controls.
-
-
-
-
-
Thermcraft, Inc.
Controllers
Manufacturer Overview
Backer Hotwatt was established in 1952 and is based in Danvers Massachusetts with offices and subsidiaries across North America, Asia, and Europe. The company is a manufacturer of resistance heating elements to markets including medical devices, semiconductors, photonics, test & measurement devices, and automotive & fuel cells. The company’s standard heating element products include cartridge heaters, sun rod heaters, ceramic heaters, and strip heaters. The company also sells temperature and voltage-controlling devices and accessories such as terminal covers, insulating beads, and various sleeving.
-
-
-
-
-
TCR Inc.
Controllers
Manufacturer Overview
TRC Inc is in Wisconsin Rapids, Wisconsin. TRC provides metal stamping solutions, systems, consulting, repair and inspection services, and upgrades to existing systems. Their primary customers are the metal-forming equipment industries. The products offered by TRC include Coil Handling and Feed Lines; Automated Equipment and Transfer Systems; Press Controls and Safety Guarding Systems; Mechanical, Servo, and Hydraulic Presses; Die Change and Handling; and Dexco Coil Racking Systems and Equipment. T TRC Inc. is a member of the Precision Metal Forming Association.
-
-
-
-
-
WPT Power Corporation
Controllers
Manufacturer Overview
WPT Power Corporation, established in Wichita Falls, Texas, in 1992, is a manufacturer of mechanical power transmission equipment. The company's product portfolio includes Gearboxes used for transmitting power, Shaft Couplings, sprockets and roller chains, suitable for power transmission in conveyor systems and other mechanical applications and Belt Drives. Their products are used in industries including Manufacturing and Industrial Plants, Mining and Quarrying, and Agriculture. The company provides Quality Assurance, Technical Support, national distribution, customized services and customer support.
-
-
-
-
-
International Crystal Laboratories
Controllers
Manufacturer Overview
International Crystal Laboratories, ICL, was founded in 1962 and is based in Garfield, New Jersey. ICL serves the spectroscopy, applied spectroscopy, and analytical chemistry industries and end users. ICL’s product categories include transmission windows & optics, FTIR calibration films, sample cards, powders, cuttings, IR, UV, optical spectroscopy sampling, laboratory presses, die sets, laboratory supplies, and spectro-optic lab supplies. Examples of ICL’s products include circular disks, magneto crystals, crystal cuttings for grinding, Gemini FTIR gas analysis cells, liquids, and solids, polishing kits, and laboratory grinding mills.
-
-
-
-
-
Nitto Kohki U.S.A., Inc.
Controllers
Manufacturer Overview
Nitto Kohki USA is the US-based subsidiary of Japan-based Nitto Kohki. Nitto Kohki was established in 1956, originally as a manufacturer and marketer of air micrometers and other devices. Nitto Kohki develops products that save on energy and labor while being cleaner for the environment. 4 of Nitto Kohki’s product segments are tools, pumps, CUPLA, and delvo. Tools are used in wood working, aerospace, renewable energy, bridge building, and automotive. Pumps are used in hospital equipment, semiconductors, health and beauty equipment, and medical devices. CUPLA products are used in high purity chemicals, HVAC production, computer and server cooling, and plastic injection. Delvo products are used in door frames, PCBs, home appliances, and lighting.
-
-
-
-
-
Gaumer Process INC.
Controllers
Manufacturer Overview
Gamer Process was founded in 1962 and is headquartered in Houston, Texas. The ISO 9001 registered company is an electric heater manufacturer, providing engineering, design, and manufacturing of heating equipment and systems including control panels, liquid fuel conditioning, pumping, and other engineered systems for industrial, paper, marine, aeronautics, and defense industries. Some of the company’s heating solutions include indirect electric heaters, duct heaters, and process immersion heaters. The company’s non-heating solutions include pressure reduction stations, fuel gas scrubbers, and ammonia unloading stations.
-
-
-
-
-
Riverside Automation
Controllers
Manufacturer Overview
Riverside Automation, located in Rochester, NY, is a manufacturer of custom automation equipment since 1992. They provide a comprehensive service that covers the entire project, from the initial concept to the installation stage. The company offers various services, such as lean cell equipment, dial rotary automation, linear transfer automation, and power and free automation. Using CAD/CAM technology and on-site engineering, they can offer a quick turnaround for projects in various industries.
-
-
-
-
-
Innovative Automation, Inc.
Controllers
Manufacturer Overview
Innovative Automation, Inc. is a manufacturer of tools and manufacturing machinery established in 2000 and based in Romulus, Michigan. It specializes in manufacturing coating, inspection, lubrication, swaging, and tube processing machines. It also manufactures heat exchange, such as core builders, fin mills, roll form tooling, stamped fin tooling, and tube stuffers. The company is a parent company of Livernois Engineering and Tridan International with similar manufacturing products. Its manufactured products are utilized for robotics, roll forming, sawing, and heat exchanger manufacturing sectors across the USA.
-
-
-
-
-
MSA
Controllers
Manufacturer Overview
MSA Safety, founded in 1914, is a manufacturer and supplier of safety products such as self-contained breathing apparatus, flame detection systems, fall protection devices, and fire & rescue helmets that protect users from potentially dangerous or life-threatening situations while working in the oil, gas, and petrochemical industries, the fire service, mining, construction, and military. Cranberry Township, Pa., is the company's headquarters north of Pittsburgh, and it has manufacturing plants in the United States, Asia, Europe, and Latin America. MSA generates approximately half of its sales outside North America, with over 40 international sites.
-
-
-
-
-
Dart Controls, Inc.
Controllers
Manufacturer Overview
Dart Controls was founded in 1963 and is now headquartered in Zionsville, Indiana. The company is a designer and manufacturer of drives, controls, and accessories for electric motors to customers across North America and certain overseas countries. The company implements lean manufacturing with tools and concepts such as Kanban, Kaizen, just-in-time, and Poka-Yoke to improve reliability and reduce costs for customers. The company’s product offerings include digital potentiometers, low-voltage DC, encoders, and multiple types of drives. The company offers packaged total solutions of sensors and drives.
-
-
-
-
-
Satellink, Inc.
Controllers
Manufacturer Overview
Satellink, Inc., situated in Garland, Texas, has been a supplier of low noise linear amplifiers, frequency converters, and special receiving equipment since 1982. The company produces amplifiers for various MILSATCOM Programs and special applications, including classified programs, NASA projects, and radio astronomy applications. Their amplifiers ranges from cryogenically cooled, thermoelectric cooled, to uncooled ambient units. These products are essential in facilitating seamless connectivity in remote environments, enabling data transmission, voice communication, and IoT connectivity via satellite. They operate a quality management system that complies with the requirements of BS EN ISO 9001:2015.
-
-
-
-
-
MicroCentric Corp.
Controllers
Manufacturer Overview
MicroCentric was founded in 1969 and is based out of Plainview, New York. The company is a manufacturer of precision work holding technology that utilizes design, quality materials, and precision workmanship for long-term performance and accuracy. The company’s product lines include multiple varieties of chucks, collets, and air cylinders. The company has a European subsidiary based in Stuttgart, Germany with full manufacturing and design capability catering to the European market. The company also has a Japanese partner in Dynamic Tools Corporation headquartered in Kyoto. Dynamic Tools provides sales, service, and support for all MicroCentric products.
-
-
-
-
-
Daisy Data Displays, Inc.
Controllers
Manufacturer Overview
Daisy Data Displays, Inc., established in 1983 in New Cumberland, Pennsylvania, is a manufacturer of industrial computers and monitors. Some of their products include rugged computers and monitors which serve purposes like process control, machine vision, video surveillance, and HMI. Their products are designed for harsh environments and find applications in various industries, such as manufacturing, food and beverage, healthcare, transportation, and utilities. Daisy Data Displays also offers other products like keyboards, mice, and KVM switches. The company holds ISO 9001:2015, UL listing, and CE certifications for its quality management system.
-
-
-
-
-
EXAIR LLC
Controllers
Manufacturer Overview
EXAIR was incorporated in 1983 and based in the suburbs of Cincinnati, Ohio. EXAIR is a manufacturer of compressed air-operated products to solve problems in industrial plants. Customer solutions EXAIR addresses include cooling, cleaning, coating, conveying, drying, industrial housekeeping, static elimination, and optimization. EXAIR products include vortex tubes, air amplifiers, air knives, air-operated vacuums, ionizing products, air wipes, static eliminators, vacuum generators, vortex tubes, cabinet coolers for standard and hazardous location, cold gun air coolant systems, and other accessories.
-
-
-
-
-
Baelz North America
Controllers
Manufacturer Overview
Baelz North America is the Marrietta, Georgia-based official supplier of Baelz Automatic components and engineered systems for North America. Baelz Automatic was originally founded in Germany in 1896 and today serves as a manufacturer of energy-saving components and engineered systems for controlling process heating and cooling applications. These often serve the automotive, food, wine, marine, and chemical industries. Baelz North America is a manufacturer in addition to being a supplier of control valves. The company also manufactures and distributes actuators, controllers, ejectors, and other related parts while adding inspection and repair after market services.
-
-
-
-
-
DYMAX
Controllers
Manufacturer Overview
Dymax Corporation was founded in 1980 and is headquartered in Torrington, Connecticut. The company develops and manufactures rapid and light-curable materials and light-curing systems for the medical, consumer electronics, wearables, aerospace, and automotive electronics industries. The company’s product segments include Light Curable Materials, Light-Curing Equipment, and Dispensing Equipment. Light Curable Materials include masking, gasketing, and activators. Light-Curing Equipment includes conveyor systems, flood-curing systems, and radiometers. Dispensing Equipment includes dispense valves, syringe dispensers, and material reservoirs. The company also offers application engineering, equipment, and system integration services.
-
-
-
-
-
ThermOmegaTech, Inc.
Controllers
Manufacturer Overview
ThermOmega Tech, Inc. was founded in 1983 with valves featuring thermal actuator technology, offering freeze protection for railroad industry valves. The company has since grown to serve factory manufacturing, water management, aerospace, and other industries. The company’s current product line of valves and equipment includes specialty purpose valves such as scald protection and freeze protection valves, temperature-controlled water delivery systems, emergency shut-off valves, and protection valves, to standard water control valves.
-
-
-
-
-
Dynalab Corp.
Controllers
Manufacturer Overview
Dynalab Corp was founded in Rochester, New York in 1957. Together with its wholesale division, Dynalon Labware, Dynalab produces and distributes standard and custom-made scientific equipment and laboratory supplies across North America. Science equipment and sampling apparatus offerings include hygrometers, mailing point devices, rollers, water stills, powders, seals, various samplers, and drills. Some of Dynalab’s laboratory supplies include Azlon plastics, burn-up boxes, desiccators, hydrometers, pipettes, shields, stopcocks, tote boxes, tubing, and watch glasses.
-
-
-
-
-
Tempco Electric Heater Corp.
Controllers
Manufacturer Overview
Tempco is based in Wood Dale, Illinois and has been in business since 1972. Tempco is a manufacturer of many types of heating elements and thermocouples with design variations. Tempco is ISO 9001:2015 certified. Temco’s electric heaters and elements include band heaters, cartridge heaters, cast-in heaters, ceramic fiber heaters, coil and cable heaters, drum heaters, enclosure heaters, flexible heaters, heat trace cable, heated hose and tubing, infrared heaters, process heaters, shroud systems, strip heaters, tank heaters, and tubular heaters. Tempco also sells various application accessories and wiring accessories.
-
-
-
-
-
Panel-Fab
Controllers
Manufacturer Overview
Panel-Fab, established in Wacol, Queensland, in 1994 is a manufacturer of control panels that are used in the construction, and installation of transportable buildings. The company's product portfolio includes Customized panels for powering and managing electrical systems, Distribution Panels and Intuitive control panels for managing building functions and safety systems. The company serves industries such as Construction Site Facilities, Prefabricated Homes and Buildings and Emergency Housing Solutions. The company also offers customer services that include support, custom research projects and customized services.
-
-
-
-
-
Machine Components Corp.
Controllers
Manufacturer Overview
Machine Components Corp. (MCC) is an American manufacturer of standard as well as custom machine components established in Plainview, New York in 1961. The company produces various machine components with different functions and applications in industrial manufacturing or processing facilities. These include mechanical and slip clutches, toggle and joystick switches, friction hinges, and solenoid-operated clutch brakes. MCC products are utilized by clients in the aerospace, telecommunication, security, and military industries, as well as by manufacturers and OEMs in the commercial sector.
-
-
-
-
-
Cress Mfg. Co.
Replacement Digital Temperature Control
Manufacturer Overview
Cress Mfg. Co. (CMC) is a manufacturer of ceramic and glass kilns as well as electric furnaces that was founded in 1973. Based in Carson City, Nevada, the company produces various top-loading and front-loading kilns for firing ceramics or manipulating glass, industrial furnaces used for hardening steel, ventilation systems, and pyrometers for real-time temperature monitoring. CMC products have applications in the aerospace industry, machine shops, laboratory research, jewelry, pottery/glassware production. It also offers after-sales services including technical support and parts replacement.
-
-
-
-
-
Thermal Care, Inc.
Controllers
Manufacturer Overview
Thermal Care, Inc., established in 1969, is an ISO 9001-certified industrial water chiller and process cooling equipment manufacturer in Niles, Illinois. The company ships worldwide, and has domestic and worldwide sales offices in Canada, Mexico, Central, and South America. Its product lineup includes cooling towers, portable chillers, reservoirs, and temperature controllers. Further, Thermal Care produces standardized and customized cooling systems for a vast range of industries, from food and dairy, to aviation, medical, and industrial.
-
-
-
-
-
Despatch - ITW EAE
Controllers
Manufacturer Overview
Despatch is a manufacturer of industrial ovens and other thermal products that was established in 1902 and acquired by ITW EAE, a division of Illinois Tool Works, Inc., in 2011. Based in Minneapolis, Minnesota, the company produces benchtop and laboratory ovens, industrial cabinet ovens and furnaces, truck-in ovens, and conveyor ovens. It also offers thermal and catalytic oxidizers for managing pollutants, spare parts, and accessories such as timers or sensors. Despatch primarily serves clients in the healthcare, electronics, transportation, and material handling sectors.
-
-
-
-
-
Magnetool, Inc.
Controllers
Manufacturer Overview
Magnetool, Inc. was established in 1951 and located in Troy, Michigan. Magnetool is a designer and manufacturer of permanent magnet and elegromagnetic devices used for material handling, holding, lifting, demagnetizing, and filtering. Magnetool also offers custom applications. Magnetool product categories include magnetic tools such as multi-lifts and various lifting magnets, electromagnets such as bipolar electromagnets and low profile electromagnets, demagnetizers, rectifier controllers, chuck & sine plates, magnetic filters, and magnetic sweepers. Magnetool also offers repair facilities for permanent chucks and electromagnetic chucks.
-
-
-
-
-
Paul Mueller Company
Controllers
Manufacturer Overview
Paul Mueller Company, established in 1940, is an American manufacturer of stainless steel processing systems and equipment, headquartered in Springfield, Missouri. The company's product range includes various types of tanks for storage, processing, and serving. Additionally, Paul Mueller Company offers diverse processing systems for applications such as beverage infusion, heat recovery, and refrigeration. Furthermore, the company's PyroPure line features pure steam generators and condensing units designed for producing water-for-injection (WFI) quality pure steam and WFI quality distillate. Paul Mueller Company serves various industries including food, beverage, brewing, and wine, chemical, dairy farming and processing, oil and gas, as well as pharmaceuticals.
-
-
-
-
-
Ashcroft, Inc.
Controllers
Manufacturer Overview
Ashcroft was founded in 1852 in Bridgeport, Connecticut to create instruments to protect steam-powered industry workers and today is a manufacturer in pressure and temperature measurement instrumentation.Ashcroft serves the chemical, food & beverage, metals & minerals, oil & gas, pharmaceutical & research, power, and water & wastewater markets. Ashcroft products include pressure instruments including pressure gauges, switches, sensors, and isolators; test instruments including calibrators, controllers, testers, and test gauges; and temperature instruments including thermometers, thermowells, RTDs, thermocouples, multipoint temperature sensors, and OEM temperature sensors.
-
-
-
-
-
Wisconsin Oven Corporation
Temperature Controllers
Manufacturer Overview
Wisconsin Oven Corporation has operated since 1973 and is located in East Troy, Wisconsin. Wisconsin Oven designs, engineers, and manufactures industrial ovens and other heating equipment for numerous applications including heat treating, powder coating, paper pulp drying, finishing, drying, and curing in the aerospace, automotive, composite, energy, finishing, foundry, heat treating, annealing, military, and pharmaceutical industries. Types of ovens and equipment include custom and standard batch ovens, conveyor ovens, pollution control equipment, and walk-in ovens.
-
-
-
-
-
Eagle Microsystems, Inc.
Controllers
Manufacturer Overview
Eagle Microsystems has a 50-year history and is based in Pottstown, Pennsylvania. Eagle Microsystems is a designer, engineer, and manufacturer of scales and weighing systems in a variety of configurations for water treatment and industrial environments. Eagle Microsystems product categories include cylinder/carboy scales, displays, controllers, analyzers, drum/tank scales, weighing systems, polymer feeders, ton container scales, volumetric dry feeders, and accessories. Eagle Microsystems offers engineering support for weighing systems, offering product development, and custom design and consulting for manufacturers, raw materials providers, and end users.
-
-
-
-
-
OMEGA Engineering inc.
Temperature and process controller
Manufacturer Overview
OMEGA Engineering was originally begun in 1962 as a manufacturer of thermocouples and has grown to over 100,000 products for measurement and control of temperature, humidity, pressure, strain force, flow, level pH, and conductivity as well as customer service including data acquisition, electric heating, and custom-engineered products. Additionally, OMEGA offers tools to serve as reference for engineers around the world. OMEGA Engineering serves the aerospace, automotive, wireless, sanitary, test & measurement, process control, power monitoring, environmental, and laboratory markets.
-
-
-
-
-
Dynisco
Pressure/Process Controllers
Company Overview
Dynisco, founded in 1965 and headquartered in West Chester, Pennsylvania, is a manufacturer and supplier of flow control products. The company’s product range entails flow meters, flow controllers, flow switches, flow sensors, and flow conditioners. It caters to diverse industries, including oil and gas, chemical, pharmaceutical, food and beverage, water treatment, and power. Offering design, engineering, certification, supply chain management, and technical support services, the company is devoted to delivering inventive and dependable flow control solutions. With ISO 9001:2015 certification, the company adheres to rigorous quality standards.
-
-
-
-
-
Opto 22
Modular Controller
Company Overview
Opto 22, established in 1974 and based in Temecula, California, USA, is a manufacturer and supplier of automation products. The company's product range includes groov RIO, groov EPIC System, groov Case Studies, Product Selector, and Product Families. These products aid in integrating control, connectivity, and cybersecurity in industrial settings. They serve the automation machinery manufacturing sector. The company's services include securely accessing systems at remote locations, collecting and processing operational and energy data, developing real-time control programs, and building operator HMI screens.
-
-
-
-
-
MELTRIC Corporation
Controllers
Company Overview
PiMELTRIC, established in Franklin, WI, in 1982, is a manufacturer of industrial duty electrical plugs and receptacles. Their product portfolio includes receptacles and outlets, including weather-resistant models, ensuring a secure power connection for various industrial equipment and industrial duty plugs designed to withstand heavy-duty use in various industrial settings. The company serves industries including Manufacturing and Production, Petrochemicals and Refineries, Energy and Utilities and Transportation.The company has global distributors and provides customized services and customer support.
-
-
-
-
-
Rainmaker Pump Stations
Controllers
Company Overview
RainMaker Pump Stations was founded in 2001 and is based in Lexington, South Carolina. The company is a manufacturer of custom-engineered products for commercial, governmental, and residential customers. The company has five product lines: Industrial/Municipal, Agricultural Irrigation, Landscape Irrigation, Pump Controls, and Accessories. Through these lines, the company produces individual pumps, complete pumping systems, individual starters and control boxes, and other necessary components and fittings. The company’s other services include custom fabrication, startup, installation, and repairs for systems and individual products.
-
-
-
-
-
AW-Lake Company
Controllers
Company Overview
AW-Lake is based in Oak Creek, Wisconsin. AW-Lake is a distributor of process flow measurement equipment for oil and gas, automotive, hydrogen fueling, chemical, manufacturing, marine, industrial, and aerospace industries among others. AW-Lake is ISO-9001:2015 certified. AW-Lake products include gear & PD flow meters, turbine flow meters, Coriolis mass flow meters, variable area meters, paddle wheel flowstat meters, ultrasonic flow meters, monitors, controllers, flow sensors, pickups, turbidity sensors, and wireless/Bluetooth devices. AW-Lake products are often used in oil, lubricants, water, chemicals, paints, coatings, adhesives, sealants, and sanitary liquids gas.
-
-
-
-
-
Metafin Supply Company.
Controllers
Company Overview
Metafin Supply company was founded in the 1980s and is headquartered in Volo, Illinois, and is a distributor of metal finishing and electroplating equipment and supplies for the surface finishing industry. Metafin Supply offers a range of machines and parts. Machine listings include pumps, filtration systems, centrifugal dryers, and heaters. Parts and components include cartridges, individual chemicals, tank magnets, and dipping baskets. Items or parts not present on the website may be available upon request by email or phone.
-
-
-
-
-
Cleatech LLC
Controllers
Company Overview
Cleatech LLC is a laboratory equipment and cleanroom supply manufacturer and distributor based in Orange, California. The company produces various standard and custom-made products for laboratory use. These range from furniture, such as cleanroom storage cabinets, to laboratory equipment, including fume hoods, incubators, and microscopes. Additionally, the products are available in fire-resistant, anti-static steel, acrylic, polypropylene, PVC, and polycarbonate. Its products are for controlled-environment applications in the medical, research, food, chemical, and aerospace industries.
-
-
-
-
-
Energy Machinery, Inc.
Controllers
Company Overview
Energy Machinery, Inc. was established in 1971 and headquartered in Rockland, Massachusetts. The company is a distributor and service provider of compressed air equipment for customers in general manufacturing, electronics, medical facilities, auto repair, and other industries. The company’s product line includes air compressors, blowers, breathing air purifiers from manufacturers such as Westinghouse, Gardner Denver, and Chicago Pneumatic. The company’s service lineup includes parts, repair work, rentals, used machinery, and planned maintenance programs.
-
-
-
-
-
Core-Rosion Products
Controllers
Company Overview
Core-Rosion Products, established in 1974, is a manufacturer's representative and distributor of mixers, wastewater treatment equipment, and tank specialties. The company, headquartered in Signal Hill, California, also runs a Satellite office in Scottsdale, Arizona, and targets the state's market, Nevada, and New Mexico. They represent Samsco, Proco, Flowline, Unipure, and Siemens Industry Inc manufacturers in the southwestern United States. Core-Rosion distributes products made from stainless steel, fiberglass, polyethylene, and PVC. The establishment also supplies accessories, including ladders, and manways.
-
-
-
-
-
BrandTech Scientific, Inc.
Controllers
Company Overview
BrandTech Scientific was founded in 1996 and is headquartered in Essex, Connecticut. BrandTech Scientific supports laboratory sciences as a distributor for German-made supplies in Canada and the United States. BrandTech Scientific’s products include categories such as liquid handling including pipettes and instrumentation, life science such as PCR products and microplates, laboratory vacuum such as rotary vein pumps, lab support jacks, lab ware such as test tube racks, volumetric lab ware hardware and software, and lab rat gear, as well as offering vacuum pump selection guides.
-
-
-
-
-
Waage Electric, Inc.
Controllers
Company Overview
Waage Electric, Inc., which was established in 1908, is a US electric heating manufacturer based in Kenilworth, New Jersey. The company produces hot plates, melting pots, various heaters, coat tanks, and wax droppers for a wide range of commercial and industrial applications, such as technology, hardware manufacturing, and product assembly. They are commonly used for the production of batteries, package sealing, product coating, and dying. Additionally, the company has national and international distributors available to service customers worldwide.
-
-
-
-
-
Petersen Products Co.
Controllers
Company Overview
Peterson Products Company is based in Fredonia, Wisconsin and has a history dating back to its first patent issued in 1916. Peterson Products Company is ISO 9001:2015 certified manufacturer and distributor of products designed to assist customers with wastewater, tunneling, plumbing, and pipeline needs. Peterson’s product categories include annular seals, contractor tools, custom inflatable tools, custom manufacturing, inflation accessories and fittings, lifting bags and pipe handlers, pecker carriers, high pressure pipe plugs, chemical resistant pipe plugs, temperature and pressure gauges, and test equipment.
-
-
-
-
-
MAXPRO Technologies, Inc.
ControllersAir Control Packages
Company Overview
MAXPRO Technologies was founded in 195 and is founded in Fairview, Pennsylvania. MAXPRO is a distributor for pumping products including air driven liquid pumps, gas boosters, air amplifiers, high-pressure valves, fittings, and tubing. Other products include high-pressure fittings such as adapters, bulkheads, couplings, crosses, elbows, nipples, and tees. Rental equipment and complete systems such as air amplifier systems, liquid pumping systems, gas booster systems, oxygen gas booster packages, portable test carts, high pressure test systems and custom systems are also available.
-
-
-
-
-
Sterlco Sterling Authorized Dist. - M & M Control
Controllers
Company Overview
Sterling Sterlco was founded in 1916 and distributes under M&M Control Service, Inc. is a specialist in industrial control units. Industrial control units are in two basic varieties: steam control family and temperature control units. Steam Control units include steam traps, Y strainers, temperature control valves, hand radiator valves, boiler feed pumps, condensate pumps, and centrifugal pumps. Temperature control units include portable chillers, central chillers, and water and oil temperature control units. Additionally, Sterling also manufactures pump tanks.
-
-
-
-
-
Motor Protection Electronics, Inc.
Controllers
Company Overview
Motor Protection Electronics, Inc. was founded in 1983 and is located in Apopka, Florida. The company is a manufacturer and designer of industrial controls for several industries including water and wastewater industries to customers around the United States through its distributors. Since its founding, the company has designed and manufactured all parts at its company headquarters in Apopka, Florida. The company’s 10 product segments include phase and voltage monitors, alternators, time delay relays, and intrinsically safe controls.
-
-
-
-
-
Pelonis Technologies, Inc.
Controllers
Company Overview
Pelonis Technologies, Inc. was founded in the 1990s in Exton, Pennsylvania. Pelonis technologies is a manufacturer and distributor of air movement technologies and specialty heating products for commercial and industrial use. Pelonis Technologies is ISO 9000 and ISO 14000 certified. Pelonis Technologies has 3 main standard product segments in cooling, heating, and motors & motion control. Cooling products include fans, blowers, micro cooling, and automotive fans & blowers. Heating products include PTC heaters, temperature controllers, and immersion heaters. Motors & motion control include micro, planetary, AC, and medical micro motors. Custom solutions include AC and DC fans and blowers.
-
-
-
-
-
East Bay Distributors Inc.
Controllers
Company Overview
East Bay Distributors, Inc. is a distributor for pneumatic applications, specializing in connectors, fittings, and industrial parts used across industries by both small companies and Fortune 500 corporations. The company’s distribution categories include SPC Fittings, SPC Products, Brass Fittings & Adapters, and Accessories. The company also features Dewalt protective products, including eyewear and work gloves. The company’s inventory management systems for customers offers benefits of lowering inventory costs, improving cash flow, and savings customers time and resources.
-
-
-
-
-
Pollak
Controllers
Company Overview
Pollak Corporation was established in 1909 as a tool and die shop in Boston, Massachusetts. In 2019, Pollak Joined Standard Motor Products and expanded its product offerings. Today, Pollak provides custom design, test, and manufacturing for automotive, agricultural, construction, and marine-related industries. In the company’s ISO 9001/QS9000 certified facilities, the company advances customer requests from the concept stage through testing, initial production, and all the way to volume production. The company’s existing customers include Ford, General Motors, PACCAR, John Deere, and Caterpillar.
-
-
-
-
-
Kinematics & Controls Corporation
Controllers
Company Overview
K Controls, a British company, specializes in developing, manufacturing, and distributing industrial valves, actuators, and control equipment to various sectors, including oil and gas, petrochemicals, and water treatment. For over four decades, the company has delivered inventive and dependable solutions to intricate engineering problems, earning it an excellent reputation. Among its achievements is the Queen's Award for Enterprise in International Trade, which it received in 2015 for contributing significantly to the UK economy through exports. K Controls is a provider of industrial control equipment both locally and globally, thanks to its strong devotion to originality and customer service.
-
-
-
-
-
Wavelength Electronics
Temperature Controllers
Company Overview
Wavelength Electronics is a manufacturing company that specializes in laser control technology, founded in 1993, the company is based in Bozeman, Montana. The company offers a range of products, including laser diode drivers, quantum cascade laser drivers, temperature controllers, instruments, and accessories. Their products are used in many applications, including biomedical, life sciences, remote sensing, military, aerospace and more. Their knowledgeable applications engineers are always available to provide guidance and assistance to customers.
-
-
-
-
-
Acromag, Inc.
Controllers
Company Overview
Acromag was founded in 1957 and operates out of Wixom, Michigan. Acromag designs critical measurement instrumentation equipment for the petrochemical and aerospace industries as a designer of analog and digital control products for the industrial I/O and defense OEMs markets. Acromag has two primary segments: signal conditioners & network I/O and embedded I/O & processing solutions. For signal conditioners, Acromag produces ethernet I/O modules, temperature transmitters, signal splitters, process limit alarms, signal converters, and more. For embedded I/O, Acromag also produces interface I/O boards, reconfigurable FPGA boards, and more. Acromag manufactures its products in the United States and ships globally.
-
-
-
-
-
Anguil Environmental Systems, Inc.
Controllers
Company Overview
Anguil Environmental Systems, Inc. was established in 1978 and headquartered in Milwaukee, Wisconsin. The company serves numerous industries including automotive manufacturing, semiconductors, food & beverage processing, renewable natural gas, and rubber curing with engineered environmental equipment and service solutions designed to solve industrial air and water filtering and contaminant removal. The company operates through 5 segments including Air, Water, System Design & Engineering, Aftermarket Services, and Pre Owned Technologies. Through these, the company collaborates with customers to design, install, and maintain equipment.
-
-
-
-
-
Intek Corp.
Controllers
Company Overview
Intek Corp, a Missouri-based company, is a premier industrial heating and space heating provider for industrial applications with over half a century of experience. Although Intek Corps primarily caters to Industrial heating needs, their range of products and services also benefit other markets, including screen printing, material handling, and custom manufacturing. Intek Corp uses patented Intek Heating Elements for its line of proprietary products, such as the ZONALL & STEALTH Space heaters and QUICKSILVER flash dryers. Intek Corps also offers services such as parts and service repair for all dryer and oven models.
-
-
-
-
-
Addison Electric, Inc.
Controllers
Company Overview
Addison Electric originally opened its doors in 1980 and is headquartered in Addison, Illinois. Addison Electric provides systems integration, distribution, and service for industrial tools and equipment. Product lines include motors & gears, drives, controllers, sensors, devices, fuses, blocks, holders, low voltage control products, and thermal management. Service options include electrical and motor services such as PLC programming and clutch and brake repair, as well as dyne load testing and drive and motor dyne testing.
-
-
-
-
-
Ward Ventures, Inc.
Controllers
Distributor Overview
Ward Systems, Inc. is a software development company based in Maryland, USA, supplier of advanced software tools and technologies. The company was established in 1988, they develop artificial intelligence (AI) and machine learning (ML) software solutions. One of their product is NeuroShell, a powerful neural network software platform designed to facilitate data analysis, prediction, and modeling. It enables users to harness the power of AI and ML algorithms without requiring extensive programming knowledge.
-
-
-
-
-
Industrial Pump Sales & Service, Inc.
Controllers
Distributor Overview
Industrial Pump Sales & Service, Inc. is based in Tiverton, Rhode Island and is a distributor and service provider to industrial and commercial customers. Industrial Pump Sales & Service product offerings include air diaphragm pumps, sewage & sump pumps, magnetic drive pumps, progressive cavity pumps, ANSI process pumps, gear pumps, vertical turbines, boiler feed & condensate, drum pumps, diaphragms, pump systems, tanks, valves, and accessories. Additional services include repairs that are performed in shop or in field as well as custom pressure feed systems.
-
-
-
-
-
R.L. Craig Company, Inc.
Controllers
Distributor Overview
R.L. Craig Company, Inc. was founded in 1955 and is headquartered in Louisville, Kentucky. R.L. Craig Company is a distributor of HVAC and related products for residential, commercial, and industrial customers. R.L. Craig Company’s product lines include air distribution such as displacement ventilation and clean room exhaust systems, louvers and dampers such as fire & smoke dampers, vibration & noise control such as floating floor systems, duct systems such as acoustical duct, dust & filtration systems such as oil mist collectors, heating & cooling equipment such as gas unit heaters, fans such as utility set fans, and other equipment such as laboratory air flow controls.
-
-
-
-
-
Clean Air Company
Controllers
Distributor Overview
Established in 1976, The Clean Air Company has been providing high-quality air purification services to manufacturing facilities, vehicle maintenance, and office space. Their main purpose is to improve indoor air quality by filtering or exhausting various pollutants that threaten employees' health. Known for their exceptional services, the clean air company has faithfully served Delaware, Pennsylvania, Connecticut, New York, and New Jersey, residents. In the pursuit of providing clean air, they have been helping businesses remain safe, lucrative, and compliant by reducing insurance, maintenance, and energy costs.
-
-
-
-
-
Orr & Orr, Inc.
Controllers
Distributor Overview
Orr & Orr, Inc. has been offering wholesale distribution services since 1934 out of Bedford Park, IL. Orr & Orr emphasizes speed of order processing, shipping, and both customer and distributor satisfaction. Product categories that Orr & Orr offers include air conditioners, brake controls, cargo restraint equipment, door tracks, lighting equipment, fans, gas springs, heating equipment, hinges, plumbing supplies, seat belts, steps, toolboxes, hitch and towing products, various truck hardware, cables, battery products, safety equipment, and spring latches.
-
-
-
-
-
Oil-Air Products, LLC.
Controllers
Distributor Overview
Oil-Air Products began in 1983 and is based in Plymouth, Minnesota. OAP is a distributor of fluid power systems and offers other services. Product listings include measurement instrumentation, pneumatics, custom manifolds, power units, lubrication, pumps, motors, valves, planetary gearboxes, accumulators, flow meters, and pumps. Other services include custom system design, hose assembly fabrication, troubleshooting, and component selection, as well as machine and part inspection and either on-site or inhouse repair options.
-
-
-
-
-
ITC SL
Controller
Manufacturer Overview
ITC SL is a Spanish ISO 9001 certified dosing pumps and accessories manufacturer that was established in 1978 in Barcelona. The company’s product lineup includes controllers for monitoring and regulation of process variables, as well as dosing pumps for delivering precise fluid or chemical increments. It also offers related accessories such as sensors, injectors, and probes. The company’s products are commonly used in industrial processes, including within the petrochemical, food and beverage, and wastewater treatment sectors.
-
-
-
-
-
Etatron
eControl
Manufacturer Overview
Etatron, founded in 1979 and located in Rome, Italy, is a manufacturer of chemical dosing pumps and equipment. The company offers a range of products that include solenoid-driven dosing pumps, motor-driven pumps, peristaltic pumps, controllers, and regulating systems. These products are utilized across industries like water treatment, agriculture, chemical processing, and pharmaceuticals. Etatron's offerings enable precise and controlled dosing of chemicals and liquids, ensuring efficient processes, regulatory compliance, and optimal results in applications.
-
-
-
-
-
Shinko Technos Co.,Ltd.
Power control unit
Manufacturer Overview
Shinko Technos Co., Ltd., established in 1945 and headquartered in Osaka, Japan, is a manufacturer of industrial measuring instruments tailored for temperature and humidity applications. The company has a comprehensive product catalog that comprises an array of instruments, including output devices like SSR power controllers, portable indicators, communication converters, recorders, and temperature and programmable controllers. These precise measuring instruments find application in a diverse range of industries, spanning from plastics and rubber manufacturing to food and packaging, environmental and energy production, as well as textiles and ceramics.
-
-
-
-
-
Invest Electronics Ltd
GAS CONTROLLERS
Manufacturer Overview
Invest Electronics Ltd., founded in 1990 and headquartered in Plovdiv, Bulgaria, is an electronics and appliance manufacturer. Since 1998, the company has been specializing in the production of Gas Sense-branded gas leak detectors and gas detection solutions for the monitoring and control of toxic, flammable, and refrigerant gases. The company offers heavy-duty ATEX-certified detectors for use in the oil and gas, hydrogen, and petrochemical industries, as well as a variety of modularly designed fixed gas detection systems for a range of industrial and commercial applications. Additionally, it manufactures gas detectors for residential use as well as portable carbon monoxide detectors.
-
-
-
-
-
The ProMinent Group
Controllers
Manufacturer Overview
Prominent, established in 1960 in Heidelberg, Germany, is a manufacturer and supplier of precision chemical dosing and fluid control solutions. The company's diverse product portfolio includes metering pumps, controllers, sensors, and complete systems used for accurate and effective chemical dosing in various industries such as water treatment, food and beverage, and pharmaceuticals. Prominent's solutions play a vital role in ensuring precise chemical dosing, which is essential for maintaining process efficiency and product quality. Their ideal technologies ensures sustainability and resource optimization. Besides, the company aims to deliver advanced solutions that meet the unique requirements of each application.
-
-
-
-
-
Vögtlin Instruments GmbH
Controller
Manufacturer Overview
Vögtlin Instruments GmbH, established in 1986 and based in Muttenz, Switzerland, is a manufacturer of precision gas flow instruments. The company produces products such as mass flow meters of different models and precision control valves used in different applications such as gas analysis, laboratory equipment, life sciences, research & development, test equipment, and OEM applications. All the gas mass flow meters and mass flow controllers manufactured by the company will give analog and digital output while offering IP67/NEMA6 and ATEX protection. The company has technology centers in different countries, such as the USA, Switzerland, Germany, and Great Britain.
-
-
-
-
-
Teledyne Gas and Flame Detection.
Controllers and Alarms
Manufacturer Overview
Teledyne Gas and Flame Detection, founded in 1959 by Teledyne Oldham-Winter GmbH, is a manufacturer headquartered in Arras, France, developing end-to-end gas and flame detection solutions. The company adheres to ISO 13485 and the Waste from Electrical and Electronic Equipment (WEEE) directive, offering a range of detectors for fixed gas, area gas, and fixed flame detection. It also provides controllers, alarms, and measurement devices. These products are marketed under various brands, including Teledyne Detcon, Teledyne GMI, and Teledyne Oldham Simtronics. In addition, the company provides industrial and commercial installation services, along with calibration and maintenance programs.
-
-
-
-
-
-
-
-
-
-
-
Tohkemy Corporation
Water quality controller
Manufacturer Overview
Tohkemy Corporation, established in 1963, and headquartered in Osaka, Japan, is a manufacturer that specializes in water processing machinery and equipment. The company's products include anthracite filter media, chemical pumps, and polymer dissolving units. It also provides water measuring equipment and Mixers. Its products are designed to purify all types of water, from drinking water to industrial-use applications. It serves the water treatment and environmental conservation industries and is classified under the industrial machinery manufacturing industry.
-
-
-
-
-
M&C TechGroup Germany GmbH
Flow Monitoring
Manufacturer Overview
M&C TechGroup Germany GmbH, established in 1985 and headquartered in Ratingen, Germany, is a manufacturer of gas sampling, gas conditioning, and process control solutions. The company offers a wide range of products such as gas sample probes, heated lines, pumps, coolers, and more. It also provides filters, analyzers, temperature controllers, and gas conditioning systems. Its gas sample probe SP10 can withstand temperatures of up to 180 °C [356 °F]. The company serves several industries such as glass industry, chemical industry, environmental technology, power plants, and more.
-
-
-
-
-
Siemens AG
Distributed Controllers
Manufacturer Overview
Siemens began in 1847 and is headquartered in Munich, Germany. Siemens focuses in automation and digitalization technology and operates globally. Siemens’s 5 operating segments are digital industries, smart infrastructure, mobility, Siemens Healthineers, and Siemens Financial Services. Siemens Financial Services provides debt and equity investment as well as financing solutions. Siemens Healthineers is a medical devices company that provides products and consulting. Mobility includes passenger and freight transportation. Smart infrastructure includes full solutions for electrification. Digital industries offer both software and hardware for industries and production efficiency.
-
-
-
-
Manufacturer Overview
Kendrion, established in 1923 is a manufacturer, designer and provider of compact and connected actuators of global transition towards electrification and sustainable energy. The company is ISO 14001:2015, IATF 16949:2016, ISO/IEC 27001:2013, and ISO 50001:2018 certified. Rooted in Germany and headquartered in the Netherlands, they serve industries across Europe, the Americas, and Asia. Their products line includes intelligent actuators, industrial brakes, sensors, sound systems, valves and fluid control in wind turbines, robots, electric vehicles, and industrial processes. They also develop industrial magnetic, industrial control, industrial drive, and automotive systems.
-
-
-
-
-
elobau GmbH & Co. KG
Operate & control
Manufacturer Overview
elobau Elektrobauelemente GmbH & Co., founded in 1972 with headquarters in Germany, is a manufacturer of contactless sensor technology, operator controls, machine safety, and level measurement. The company's products include multi-axis joysticks, multi-function handles, push buttons, sensor components, and continuous level measurement. elobau’s products are used in both mobile (off-highway) and industrial applications. The company’s products can be found in aircraft, off-road vehicles, agricultural machinery, and industrial machinery. elobau Elektrobauelemente GmbH & Co. has been carbon neutral since 2010.
-
-
-
-
-
TOHO ELECTRONICS INC.
Controlling Instruments
Manufacturer Overview
TOHO ELECTRONICS INC., established in 1963 and headquartered in Kanagawa, Japan, is a manufacturer, designer, and supplier of temperature controllers, sensors, and probe cards for semiconductor testing systems. The company offers a diverse range of products, including the digital controller series, dual-channel controllers, and paperless recorders. These products are utilized for displaying measured data on a liquid crystal display, acting as a communication master to record data values on the slave side, and for washing semiconductors and printed circuit boards.
-
-
-
-
-
-
-
RKC INSTRUMENT
Products
Manufacturer Overview
RKC Instrument has been continually growing for over half a century and strives to be a solution provider of measurement and control systems. RKC supplies quality products and professional engineering services quickly and efficiently. RKC specializes in everything from limit and multiloop controllers to heater break alarms and temperature sensors. RKC has a website in Chinese, English, and Japanese and has sales networks across the globe. Based on the management concept of “Realization of the highest quality,” RKC Instrument has obtained the accreditation of ISO9001, the international standard for quality management systems.
-
-
-
-
-
Cubic Sensor and Instrument Co., Ltd.
Controllers
Manufacturer Overview
Cubic Sensor and Instrument Co. Ltd., founded in 2003 and based in Wuhan, China, is a manufacturer of gas sensors and sensor solutions and is ISO 9001 certified. It stocks products like spirometers, CO2 sensors, and gas analyzers that serve various fields, including air quality, environmental monitoring, and healthcare. It is a publicly listed company in the SSE STAR Market that has exported its products to more than 80 countries and has obtained more than 100 patents at home and abroad. It has also received ISO 45001, ISO 14001, and Automotive Tier 1 Supplier with IATF16949 certification.
-
-
-
-
-
SPEKTRA
Controllers
Manufacturer Overview
SKEPTRA, founded in 1994, is a manufacturer of components and systems for the testing and calibration of sensors for sound and vibration engineering. Based in Coschütz/Gittersee, Germany, the company manufactures calibration solutions, engineering solutions, and structural testing. They expanded in 2008 by acquiring APS Dynamics, Inc. USA, where they ventured into manufacturing ultra-low frequency vibration exciters. Their products and services are used in aviation, seismology, motor vehicle monitoring, vibration test systems, crash test, and the automotive industry. DAkkS accredit the company for calibration laboratory and ISO 17065 for manufacturing sound level meters and sound calibrators.
-
-
-
-
-
Arjay Engineering
Controllers
Manufacturer Overview
Arjay Engineering. established in Oakville, ON, in 1986, is a manufacturer of environmental control instrumentation and remote monitoring systems. The company's product portfolio includes Air Quality Monitors, Water Quality Analyzers, Soil and Environmental Sensors, Weather Stations and Emission Monitoring Systems. The company serves industries such as Environmental Monitoring and Research, Air and Water Pollution Control, Climate Change and Sustainability. Arjay Engineering offers Quality Assurance, global distribution, customized services, Technical Support, and customer support.
-
-
-
-
-
ComEnCo Systems, Inc.
-
-
